• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1244-1254
• /
• 1992

This paper investigates the vibrational damping characteristics of laminated plates composed of elastic, viscoelastic and elastic layers by theoretical and experimental methods. Laminated plates are in cylindrical bending and visco-elastic adhesive layer is assumed as the visco-elastic spring which takes damping effect through both shear and normal deformations. Governing equations oof laminated plates are derived in the form of simultaneous first order differential equations, which account for the longitudinal displacements, rotary inertia and shear deformations of elastic base plate and elastic constraining plate. The numerical calculations of the equations are illustrated by the applications to the cantilever beam in transverse vibration. The results of the solutions agree well with the experimental measurements in general. The damping effects due to the shear and thickness deformations in the adhesives are analyzed and it is shown that for thicker adhesives, the damping effect due to thickness deformation becomes significant and for thinner adhesives, due to shear deformation.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.2
• /
• pp.29-32
• /
• 1998

When rendering polyhedral models, normal vectors at polygon vertices are necessary for smooth shading. The most commonly used technique of approximating a vertex normal vector by averaging normal vectors of faces around the vertex yields, however, different results on different tessellations Further, continuous deformation of models may cause abrupt discontinuous changes in normal vector directions. In this paper, a variation of the above technique is proposed to avoid these problems. Specifically, it uses a weighted average of normal vectors of faces around the vertex, where the weight of a face being the angular span of the two edges incident on the vertex.

• Journal of Korea Game Society
• /
• v.10 no.6
• /
• pp.169-178
• /
• 2010

An effective method to render realistic metallic surface in realtime application is proposed. The proposed method perturbs the normal vectors on the metallic surface to represent small scratches. In general, bump map or normal map method is used to gnerate normal vector perturbation. However, those methods do not show plausible light scattering when applied to anisotropic reflection surface. In order to express metallic surface reflectance, MDF-based BRDF is generally employed. Therefore, the simple normal perturbation does not produce satisfactory metal rendering results. The proposed method employs not only normal perturbation but also deformation of the microfacet distribution function(MDF) that determines the reflectance properties on the surface. The MDF deformation increases the realism of metal rendering. The proposed method can be easily implemented with GPU programs, and works well in realtime environments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.55-64
• /
• 1984

Presented is a nonlinear constitutive model for progressive tensile fracturing of concrete. The model is incremental, path-dependent, and tensorialy invariant. The total strain tensor is assumed to be a sum of a purely elastic component and an inelastic component. The material is considered to contain weak planes of all directions which characterize the planes of the microcracks. A one-to-one functional dependence is assumed between the normal stress and the normal strain across each of the weak planes. The tangential stiffness of concrete is then derived form the principle of virtual work. The present theory can be applied to loading histories which are nonproportional or during which the principal directions rotate. Good agreement with the available direct tensile test data which cover strain-softening is demonstrated.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.47-51
• /
• 2012

In this study, the deformation behavior stability of sealing rings with three different cross sectional areas has been presented using a FEM technique. To investigate the deformation behavior stability, the initial compression rate of 25% has been applied to the sealing ring, which is molded with a nitrile butadiene rubber. The maximum strain, maximum stress, and maximum contact normal stress have been analyzed for the working fluid pressure of $25kgf/cm^2$. The FEM results show that the maximum strain of a hollow o-ring and a hollow rectangular ring with a hollow space in the center of a sealing ring is higher than that of a conventional o-ring, but the maximum stress and the maximum contact normal stress are low. In these results, the sealing rings with a hollow space in the center of the cross sectional area is recommended to increase an extended endurance stability of sealing rings. But, the solid sealing ring is designed to guarantee the sealing safety of a contact sealing ring.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.263-266
• /
• 2003

본 논문에서는 패치별 EGI 분포를 이용한 3D 다각형 메쉬 모델 (polygonal mesh model) 워터마킹 알고리즘을 제안하였다 제안한 알고리즘에서는 기하학적 변형에 견고하기 위하여 3D 메쉬 모델을 6개 패치로 분할한다. 그리고 위상학적 변형에 견실한 특성을 가지는 EGI 분포를 각 패치별로 구한다. 그리고 동일한 워터마크 비트열을 각 패치의 EGI 분포 중에서 길이가 큰 면체에 투영된 메쉬 법선 벡터들에 각각 삽입한다. 본 논문에서 제안한 워터마킹 알고리즘의 성능 평가를 위한 모의 실험에서 워터마크가 삽입된 모델의 비가시성 및 다양한 공격에 대한 견고성이 우수함을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.451-457
• /
• 2009

Most of objects in computer graphics may be represented by a form of mesh. The exact computation of vertex normal vectors is essential for user to apply a variety of geometric operations to the mesh and get more realistic rendering results. Most of the previous algorithms used a weight which resembles a local geometric property of a vertex of a mesh such as the interior angle, the area, and so on. In this paper, we propose an efficient algorithm for computing the normal vector of a vertex in meshes. Our method uses the conformal mapping which resembles synthetically the local geometric properties, and the mean value coordinates which may smoothly represent a relationship with the adjacent vertices. It may be confirmed by experiment that the normal vector of our algorithm is more exact than that of the previous methods.

• The Korean Journal of Rheology
• /
• v.8 no.2
• /
• pp.119-128
• /
• 1996

폴리프로필렌(PP)/폴리카보네이트(PC) 블렌드의 유변학적 고찰을 통해 블렌드의 수 축현상과 분상상의 변형의 연관성을 연구했다. 블렌드의 수축현상은 압축과정에서 변형됐던 분산상이 고온에서 다시 원래의 무변형 상태로 복귀하면서 나타나는 탄성변형의 풀림으로 추정되고 압출팽윤의 데이터와도 부합된다. 압출온도를 최대한 낮게 해서(25$0^{\circ}C$) 제조한 블 렌드의 경우가 최대한 높게 한 경우 (29$0^{\circ}C$)보다 수축이더 큰 사실을 설명하기 위하여 순수 PC와 PP의 전단점도비와 신장점도비를 측정 비교한 결과 두 값이 공히 높은 온도의 경우 가 오히려 작게 되어 점성에 의한 분산상의 전단변형이나 신장변형이 수축의 원인이 아니라 는 것을 알아다. 한편 법선응력과 전단응력의 데이터로부터 얻은 물질풀림시간의 비는 낮은 온도의 경우가 작아서 수축현상이 분산상의 탄성에 의한 변형이라는 것을 확인했다.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.52-57
• /
• 2012

This study presents sealing characteristics of multi-contact o-rings as functions of strain, compression stress, and contact normal stress using a FEM technique. The FEM results on the sealing characteristics show that the maximum strain, maximum compression stress, and maximum contact normal stress of multi-contact o-rings are approximately 1.7 times higher than those of conventional o-rings. This is due to a U-grooved cross section of multi-contact o-rings, and the multi-contact o-rings with a U-groove show more effective in sealing for high pressure vessels, valves, and gas equipments. And the extrusion failure in the multi- contact o-ring does not produce for an increased gas pressure due to a U-groove. This may extend sealing life compared to that of a conventional o-ring.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.241-244
• /
• 2004

일반적으로 메쉬(mesh)는 비정규 연결 형태(irregular connectivity)로 되어 있다. 리메싱(remeshing)은 비정규 연결 형태의 메쉬를 정규 연결 형태(regular connectivity)로 바꾸어 주는 작업이다. 메쉬의 기하 정보가 2D 그리드에 저장이 되어 있는 기하이미지(geometry Images)는 비정규 연결 형태의 메쉬를 완전 정규 형태(completely regular connectivity)로 리메싱하는 데 사용된다. 원본 메쉬를 기하 이미지로 생성하는 방법은 변형되는 크기를 최소화 하는 스트레치 메트릭(stretch metric)을 기반으로 이루어 졌다. 이 방법은 리메싱된 메쉬의 언더샘플링(undersampling)을 줄여 주게 된다. 하지만 리메싱 과정에서 생기는 오버샘플링(oversampling)은 줄여 주지 못한다. 본 논문에서는 정점(vertex)의 법선 벡터(normal vector)를 이용하여 기하이미지의 오버샘플링을 줄이는 방법을 제시한다.