• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.71-81
• /
• 2014

As domestic construction investment has been gradually reduced, the issue of expanding overseas CM market has increased. Strengthening CM capability from the view point of project life-cycle is required in overseas CM market. However, current regulations institutionally force public CM services to focus on the construction phase. Therefore, Korean CM firms can hardly have the opportunities for accumulating technical competitiveness especially for pre-construction phase. Result of this study shows that the total efforts in terms of man-hours for the construction phase is found to be more than 78 percent in domestic public CM projects. In this context, this study proposes the policies and tasks for improving 'rigid man-hour placement', 'unreasonable CM fee standards', 'CM firm selection method', 'unreasonable business scope decision', and 'evaluation of owner's project management capability' in order to improve domestic CM Industry as well as to expand overseas CM market successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.569-580
• /
• 2012

In this paper, an enhanced initial ranging algorithm for large-cell coverage fixed wireless communication system is proposed. In typical wireless communication system such as WiBro, because a round-trip delay between a transmitter and a receiver is within one OFDM (Orthogonal Frequency Division Multiplexing) symbol duration, a frequency-domain differential correlation method is generally used. However, the conventional method cannot be applied due to an increase of a maximum time delay in large-cell system. In case of an accumulative differential method, estimation errors can occur because of frequent sign transitions. In this paper, therefore, we propose an algorithm which can estimate a total timing offset in a ranging channel structure for 15 km cell. The proposed method can improve performance by sign comparison based sign error correction rule between the estimated values and using a weighting scheme based on channel correlation, the number of accumulations, and the noise reduction effect in normalization process. Also, it can estimate the integer timing offset of symbol duration by comparing peak-powers after compensating for the fractional timing offset of symbol duration.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.1
• /
• pp.89-120
• /
• 2016

This study aims to understand the concept and changes of the records management of InterPARES based on the analysis of background, main research interests, and major achievements of IP3 and ITrust. To this end, this study conducted a content analysis of IP3 and ITrust to drive main keywords. This study also utilized word clouds from IP project titles. In addition, a comparative analysis of IP3 and ITrust was conducted based on the environment, scope, core research areas, keywords, objectives, and record management life cycle perspectives. The research identified that InterPARES research was widely expanding the content and subject areas of the study: 1) to apply across the life cycle, as well as long-term preservation; 2) to focus on the concept of trust as well as the concept of authenticity; and 3) to include the concept of the Internet, digital forensics, and the open government along with electronic records.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.904-909
• /
• 2011

Cell zooming adjusts the cell range of base stations depending on traffic condition. The cell zooming can be implemented by the adjustment of antenna angles, the clustering of the base stations, and the cell relay. The base stations can adjust the cell range in term of energy efficiency, which can then reduce the overall energy consumption of cellular networks. There is, however, a trade-off between the energy savings and the blocking probability of user calls. A periodic scheme that manages the cell zooming of the base stations was proposed but it was inadequate for dealing with the dynamic nature of traffic patterns. This paper proposes a semi-periodic cell zooming scheme along with the algorithms that select such base stations and define the operation procedure. Simulation results show that the proposed method outperforms the existing scheme in terms of the energy savings without the degradation of the blocking probability.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.401-406
• /
• 2002

식물조직 배양공정의 기계화 기술개발을 위한 기초자료를 얻고자 식물조직 배양기술의 개발 또는 식물묘를 대량생산하는 연구지도기관 및 농원 등의 배양실 10개소를 대상으로 배지의 분주, 배양용기의 밀봉 및 세척, 배양체의 접종공정 등에 대한 작업실태를 조사분석한 결과를 요약하면 다음과 같다. 가. 배양기술의 개발 또는 식물묘 대량생산은 대부분이 나리, 호접란, 풍란, 심비디움 등 화훼류였으며, 배지는 모두 한천이 혼합된 고체배지, 배양용기는 형상 및 용량 등이 다른 플라스크, 배양병, pE용기 등이 사용되었다. 나. 배지의 분주작업은 조사대상 10개배양실중 6개소는 작업자가 비이커를 사용하여 분주하였고 4개소는 자동 또는 반자동분주기를 사용하였으며, 인력 및 반자동분주기의 사용시 배양용기간의 분주량은 기준량의 $\pm$25%범위에서 차이가 있었다. 다. 액체배지의 분주시 온도는 36.8~88.$0^{\circ}C$, 점도는 3.7~11.8cP 범위였고 점도는 배지에 혼합하는 한천, 사과 등 유기물의 량에 따라 차이가 있으므로 배지의 분주작업을 기계화하기 위해서는 배지의 온도와 점도, 배양용기와 분주량 등을 종합적으로 고려하여 배지의 점도에 따라 분주량을 조절할 수 있도록 개발할 필요성이 있다고 생각된다. 라. 배양용기의 밀봉소재는 플라스크의 경우 호일 또는 고무마개와 호일, 배양병은 모두 나사산이 있는 캡, PE용기는 뚜껑을 사용하였으며, 밀봉작업은 모든 배양실에서 인력에 의존하였고 작업능률은 호일만으로 밀봉하는 경우 시간당 180~240병, 캡은 시간당470~600개 정도였다. 마. 배양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4095-4100
• /
• 2011

In this paper, a log periodic bow-tie dipole array (LPBDA) antenna for UWB communications is investigated. Bow-tie shaped dipole elements are used instead of general dipole elements for LPDA antennas and the input reflection coefficient and realized gain characteristics of the LPBDA as a function of a flare angle are analyzed. It turns out that as the flare angle of the bow-tie dipole elements is increased, the lowest operating frequency is shifted toward lower frequency and the operating frequency band is increased, but the average gain is decreased. However, the gain variation of the LPBDA is much decreased and the front-back ratio is improved compared to the LPDA. Standard LPDA and LPBDA with a flare angle of 13 degrees are fabricated on an FR4 substrate with a dielectric constant of 4.4 and a thickness of 1.6 mm. Measured gain for the LPDA ranges from 4 to 6.5 dBi at 3.1 to 10.6 GHz band, while that for the LPBDA is in the range of 4.2 to 5 dBi.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.2
• /
• pp.5-17
• /
• 2019

Dynamic centrifuge model test was conducted to evaluate the dynamic stability of the pile-supported slab track method during dynamic railway loading and earthquake loading. The centrifuge tests were carried out for various condition of embankment height and soft ground depth. Based on test results, we found that the bending moment was increased with embankment height and decreased with soft ground depth. In addition, it was confirmed that the pile-supported slab track system could have dynamic stability for short-period seismic loading. However, in case of long-period seismic loading, such as Hachinohe earthquake, the observed maximum bending moment reached to pile cracking moment at the return period of 2,400 year earthquake. The criterion of ratio between embankment height and soft ground depth was suggested for dynamic stability of pile-supported slab track system.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Purpose : External markers respiratory movement measuring device (RPM; Real-time Position Management, Varian Medical System, USA) Liver Cancer Radiation Therapy Respiratory gated with respiratory signal with irradiation time and the actual research by analyzing the respiratory phase with the breathing motion measurement device respiratory tuning evaluate the accuracy of radiation therapy Materials and Methods : May-September 2014 Novalis Tx. (Varian Medical System, USA) and liver cancer radiotherapy using respiratory gated RPM (Duty Cycle 20%, Gating window 40% ~ 60%) of 16 patients who underwent total when recording the analyzed respiratory movement. After the breathing motion of the external markers recorded on the RPM was reconstructed by breathing through the acts phase analysis, for Beam-on Time and Duty Cycle recorded by using the reconstructed phase breathing breathing with RPM gated the prediction accuracy of the radiation treatment analysis and analyzed the correlation between prediction accuracy and Duty Cycle in accordance with the reproducibility of the respiratory movement. Results : Treatment of 16 patients with respiratory cycle during the actual treatment plan was analyzed with an average difference -0.03 seconds (range -0.50 seconds to 0.09 seconds) could not be confirmed statistically significant difference between the two breathing (p = 0.472). The average respiratory period when treatment is 4.02 sec (${\pm}0.71sec$), the average value of the respiratory cycle of the treatment was characterized by a standard deviation 7.43% (range 2.57 to 19.20%). Duty Cycle is that the actual average 16.05% (range 13.78 to 17.41%), average 56.05 got through the acts of the show and then analyzed% (range 39.23 to 75.10%) is planned in respiratory research phase (40% to 60%) in was confirmed. The investigation on the correlation between the ratio Duty Cycle and planned respiratory phase and the standard deviation of the respiratory cycle was analyzed in each -0.156 (p = 0.282) and -0.385 (p = 0.070). Conclusion : This study is to analyze the acts after the breathing motion of the external markers recorded during the actual treatment was confirmed in a reproducible ratios of actual treatment of breathing motion during treatment, and Duty Cycle, planned respiratory gated window. Minimizing an error of the treatment plan using 4DCT and enhance the respiratory training and respiratory signal monitoring for effective treatment it is determined to be necessary.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.16-23
• /
• 2010

Mowing is an important practice in golf course management. Mowing interval and height can affect net photosynthesis of turfgrass and finally shoot density, tillering, rooting and regrowth of turfgrass. The objectives of this study were to investigate the regrowth rate of zoysiagrass shoot under different mowing height for determination of proper mowing frequency. Recommended mowing interval were calculated by a rule that no more than 33% of the above ground height be removed in a single mowing. Daily shoot growth of zoysiagrass at 10 mm mowing height were 2.1~4.7 mm (July), 1.9~2.9 mm (August), 0.9~1.5 mm (September), and 0.6 mm (October). These results indicate that recommended mowing interval were 1.1~2.3 day for July, 1.7~2.4 day for August, 3.5~5.4 day for September, and 8.5 day for October, respectively. Daily shoot growth of zoysiagrass at 15 to 17 mm mowing height were 4.0~5.3 mm (July), 2.9~4.5 mm (August), 1.4~3.7 mm (September), and 1.3 mm (October). These results indicate that recommended mowing interval were 1.4~1.9 day for July, 1.7~2.5 day for August, 2.3~6.3 day for September, and 6.8 day for October, respectively. Daily shoot growth of zoysiagrass at 18 to 21 mm mowing height were 3.5~4.7 mm (July), 2.9~4.9 mm (August), and 1.5~1.8 mm (September). These results indicate that recommended mowing interval were 1.9~2.6 day for July, 1.8~3.1 day for August, and 5.9~7.0 day for September, respectively. Daily shoot growth of zoysiagrass at 50 mm mowing height were 4.6~4.9 mm (July), 5.0~6.5 mm (August), and 2.5~4.7 mm (September). These results indicate that recommended mowing interval were 5.1~5.4 day for July, 3.9~5.0 day for August, and 5.3~9.8 day for September, respectively.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.221-227
• /
• 1996

60Hz의 교류전계를 사용하는 종래의 Sawyer-Tower회로를 응용하여 0.1Hz의 직류 개념(quasi-DC)의 전계를 이용한 polarization과 strain의 동시 측정을 실시하였다. 측정의 대상으로는 강유전체로서 압전변형을 보이는 재료 중 가장 대표적인 PZT 계와 완화형 강유전체로서 전왜변형을 보이는 재료 중 가장 대표적인 PZT계와 완화형 강유전체로서 전왜변형을 보이는 재료 중 가장 대표적인 PMN계로 하였다. 0.1Hz한 주기의 전계 인가로 이력곡선을 측정할 수 있어서 시편의 발열을 크게 억제할 수 있었고 정확한 온도에서의 측정이 가능하였다. 또한 양방향 전계뿐 아니라 단방향 전계, 바이어스 전계도 인가할 수 있기 때문에 종래의 Sawyer-Tower 방법에서는 얻을 수 없는 강유전성에 관한 다양한 정보를 얻을 수 있었다. 이 방법은 또한 0.1Hz의 전계 하에서 얻을 수 없는 강유전성에 관한 다양한 정도를 얻을 수 있었다. 이 방법은 또한 0.1Hz의 전계 하에서 이력곡선이 측정되는 한 주기 동안에 시편에 부착된 스트레인 게이지를 통해 전계인가에 따른 strain 변화를 동시에 측정할 수 있기 때문에 strain과 polarization의 상관관계를 정확히 조사할 수 있다는 장점이 있다. PMN계에서 인가되는 전계의 넓은 범위에서 전왜정수 Q값을 연속적으로 구할 수 있었다.