• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4A
• /
• pp.227-235
• /
• 2012

Recently, study of confining effect in column members is progressed. But these studies are limited to about RC column and external confining effect in hollow columns. Internal confining effect in hollow columns has not researched. Internal confining stress is assumed the same external confining stress in hollow columns. In this study, there are to investigate the internal direction confining effect in ICH CFT column by FEA analysis. FEA analysis methods have verified by experimental values. Parametric study has performed as thickness of internal tube, hollow ratio, diameter of column and bending stiffness between concrete and external tube. Modified equations have suggested to estimating economic and reasonable thickness of internal tube.

• Journal of Korea Water Resources Association
• /
• v.37 no.4
• /
• pp.293-304
• /
• 2004

Sedimentation basin plays an important role in urban water treatment, and there are many complicated phenomena which need to be understood for efficient design and control of it. Especially, the study on the improvement of settling efficiency is required. In this study, commercial CFD (Computational Fluid Dynamics) program, FLUENT, and particle tracking method were used to simulate the flow in sedimentation basin, and to predict the settling efficiency. Computational domain of real scale was made, and detail factors such as porous wall, and outlet trough were considered instead of being simplified. The simulation results were compared with the experimental data to calibrate the parameters of particle tracking method. Sensitivity analysis showed that the particle diameter had more significant effects on settling efficiency than the particle density. The computation results gave the best agreements with the experimental data, when the value of particle diameter was 26.5 ${\mu}{\textrm}{m}$.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.5
• /
• pp.461-470
• /
• 2009

A column resisting axial load and seismic load is one of the main members in a structural system. The heated column by event of a fire can lose its strength and it may damage its structural system or cause the collapse of the entire structural system. In this study, the fire resistance capacity of internally confined hollow concrete filled tube (ICH CFT) column was investigated. In an ICH CFT column, the yield strength of the external tube is important as a concrete filled tube (CFT) column because the external tube confines the filled concrete and the strength of the column depends on the confined effect. A study was performed by finite element analyses considering the confined effect and material nonlinearity as the temperature changes by the fire. The hollow ratio, the thickness of the external tube, and the strength of concrete were selected as the parameters for the analyses. The analyses were performed by using a commercial FEA program (ABAQUS) and nonlinear concrete model program. The analysis results showed that the hollow ratio and the strength of concrete mainly affect the fire resisting capacity of an ICH CFT column.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1693-1697
• /
• 2009

수자원의 지속적 확보기술개발사업의 장단기 저수지 연계운영 및 수질개선 방안 연구에서 개발 중인 범용 하천유역관리 모형인 KModSim은 그 수행속도와 모델 구성의 편이성으로 인해 하천의 수요처와 다수개의 저수지를 포함하는 대단위 유역에 적용이 용이하다. 본 연구에서는 현재 한국수자원공사에서 저수지 운영계획에 사용하고 있는 저수지 운영 기준수위를 바탕으로 하천유지용수와 수질개선용수를 확보하는 방안을 검토하였다. 우선 수량과 수질을 고려한 저수지 운영계획을 수립하기 위하여 기존의 수량만을 분배하는 물배분 시스템을 바탕으로 방류량에 증가에 따라 수질개선을 유도할 수 있도록 수질 개선 용수 수요노드를 추가하였다. 이때 유역내의 저수지의 기준수위와 하천의 하천유지용수 및 용수수요노드의 우선순위의 설정에 따라 deficit supply 방식의 물분배가 가능하게 하였으며 이를 통해 꼭 필요한 유량이 발생 할 때 유량을 공급할 수 있도록 모형을 설정 하였다. 반면 방류량에 따른 수질개선 효과를 분석하기 위하여 과거의 수질 측정자료의 상관성을 분석하여 다중회귀분석 모형을 개발하였다. 개발된 모형은 방류량의 증가에 따른 수질개선 효과를 분석할 수 있는 모형으로 특정시점에 있어서 특정 수질 매개변수의 농도를 예측할 수 있으며 적정수준 이하의 수질 농도를 유지하기 위하여 필요한 방류량을 계산하도록 하였다. 이러한 수질 개선을 위한 공급 시나리오는 기존의 용수 우선의 시나리오 분석과 더불어 운영자에게 다양한 정보를 제공하여 보다 효율적 저수지 운영계획이 수립될 수 있도록 활용될 수 있을 것으로 기대한다.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.742-751
• /
• 2011

This paper presents a robust 3D model hashing dependent on key and parameter by using heat kernel signature (HKS), which is special shape feature descriptor, In the proposed hashing, we calculate HKS coefficients of local and global time scales from eigenvalue and eigenvector of Mesh Laplace operator and cluster pairs of HKS coefficients to 2D square cells and calculate feature coefficients by the distance weights of pairs of HKS coefficients on each cell. Then we generate the binary hash through binarizing the intermediate hash that is the combination of the feature coefficients and the random coefficients. In our experiment, we evaluated the robustness against geometrical and topological attacks and the uniqueness of key and model and also evaluated the model space by estimating the attack intensity that can authenticate 3D model. Experimental results verified that the proposed scheme has more the improved performance than the conventional hashing on the robustness, uniqueness, model space.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.233-241
• /
• 2003

Geotextile tube is hydraulically filled with dredged materials and has been applied to coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. In this paper, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of geotextile sheet and hydraulic pumping conditions. Numerical analysis was executed to compare with the results from the large-scale field model tests, and also with those of plane strain analysis and 3-D FEM analysis. A geotextile tube was modeled using the commercial finite element analysis program ABAQUS and the one-quarter of tube was modeled. Behavior of geotextile tube during the hydraulic pumping procedure was analyzed by comparing the large-scale field model test and numerical analysis. The shape variation and maximum tube height between the numerical analysis results and large-scale filed test results are turned out to be in a good agreement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1425-1432
• /
• 2013

This paper examines the applicability of the Width Function Instantaneous Unit Hydrograph (WFIUH) with a case study of Cheongmi River in South Korea. The parameter values of WFIUH can be physically determined compared to the lumped hydrologic models, which are typically accompanied by parameter estimation procedures with gage records. Assuming uniformly distributed rainfall, the hydrographs obtained with the WFIUH show good agreement with observed data and also the results from HEC-1. A simple investigation of the effect from the rainstorm movement with the WFIUH demonstrates the ability of the proposed model and the need to consider the rainstorm movement effect on the resulting hydrographs for prediction purposes.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.669-674
• /
• 2001

In order to reflect the aggregation situation in the aggregation process, aggregation based on situation assessment (ASA) method was proposed in [1]. It consists of the situation assessment model (SAM) and the ASA algorithm. In the SAM, the value of parameter, p, is transformed into the nearest integer value [1]. The integer-typed output of SAM is used as input for an aggregation. The integer-typed output of SAM indicates the current degree of aggregation situation. The ASA algorithm produces at most finite several aggregation results between min and max. In the sequel, the ASA method can not properly handle the applications with the more sophisticated aggregation results between min and max. In order to solve this problem, we propose two improved ASA (I-ASA) methods. In these I-ASA methods, we allow the value of parameter of SAM to be a real number, and suggest two improved ASA algorithms to make continuous aggregation results between min and max. These I-ASA methods can handle both a precise aggregation and an approximate aggregation. Therefore, when compared to the ASA method [1], the proposed I-ASA methods have advantages in that they can handle the applications with the more sophisticated aggregation results and can be used in the more general applications for aggregations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.540-540
• /
• 2012

강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.278-289
• /
• 2021

In this study, the acoustic performance of a dissipative silencer used in the ship with excellent performance compared to its size was predicted and analyzed using a numerical analysis method to reduce the pipe noise. To this end, the performance of the single expansion chamber-shaped silencer was verified using experimental and numerical analysis methods. The acoustic performance of the silencer was expressed using the Transmission Loss (TL), an indicator of its own performance, and the result was derived using the two-load method, which measured by changing the impedance at the end of the pipe. For the numerical analysis method, a general-purpose finite element analysis program was used, and the Delany-Bazley-Miki model with the flow resistivity of the sound absorbing material as an input parameter was applied. Finally, we compared the experimental and simulated results for each of the acoustic performances of the single expansion type and the dissipative silencer to confirm the consistency of the results, and predicted and analyzed the simulation results for four cases according to the properties of the sound absorbing material.