• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.431-435
• /
• 2011

This paper presents optimized searching technique to improve the performance of H.264/AVC. The proposed CAVLC encoder uses forward and backward searching algorithm to compute the parameters. By zero-block skipping technique and pipelined scheduling, the proposed CAVLC encoder can obtain better performance. The experimental result shows that the proposed architecture needs only 66.6 cycles on average for each $16{\times}16$ macroblock encoding. The proposed architecture improves the performance by 13.8% than that of previous designs. The proposed CAVLC encoder was implemented using VerilogHDL and synthesized with Megnachip $0.18{\mu}m$ standard cell library. The synthesis result shows that the gate count is about 15.6K with 125Mhz clock frequency.

• Journal of Broadcast Engineering
• /
• v.3 no.1
• /
• pp.69-84
• /
• 1998

In digital broadcasting, services such as digital satellite TV, cable TV and digital terrestrial TV, several video programs are compressed by MPEG-2, and then simultaneously transmitted over a conventional CBR (Constant Bit Rate) broadcasting channel. In this paper, we propose a joint quality control scheme to be able to accurately control the relative picture quality among the video programs, which is achieved by simdt;,nL'Ously controlling the video encoders to generate the VBR (Variable Bit Rate) compressed video streams. Our quality control scheme can prevent the video buffer overflow and underflow by total target bit allocation process, and also exactly control the relative picture quality in terms of PSNR (Peak Signal to Noise Ratio) between some programs requiring higher picture quality and others by rate-distortion modification. Furthermore we present a rate-distortion estimation method for MPEG-2 video, which is base of our joint quality control, and verify its performance by experiments. The most attractive features of this estimation method are as follows: 1) computational complexity is low because main operation for the estimation is to calculate the histogram of OCT coefficients into quantizer; 2) estimation results are very accurate enough to be applied to the practical MPEG-2 video coding applications. Simulation results show that the proposed joint quality control scheme accurately controls the relative picture quality among the video progran1s transmitted over a single channel as well as provides more consistent and higher picture quality than independent coding scheme that encodes each program independently.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.492-504
• /
• 2009

The delivery of multimedia that efficiently adapts its bit-rate to changing network characteristics and conditions is one of the important challenging tasks in the design of today's real-time multimedia streaming systems such as IPTV, Mobile IPTV and so on. In these work, the primary focus is on network congestion, to improve network stability and inter-protocol fairness. However, these existing works have problems which do not support QoE (Quality of Experience), because they did not consider essential characteristics of contents playback such as the media continuity. In this paper, we propose a novel rate control scheme for improving the QoE of multimedia streaming service in the Internet congestion, called NCAR (Network and Client-Aware Rate control), which is based on network-aware congestion control and client-aware flow control scheme. Network-aware congestion control of the NCAR offers an improving reliability and fairness of multimedia streaming, and reduces the rate oscillation as well as keeping high link utilization. Client-aware flow control of NCAR offers a removing the media discontinuity and a suitable receiver buffer allocation, and provides a good combination of low playback delay. Simulation results demonstrate the effectiveness of our proposed schemes.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.534-542
• /
• 1999

A sell-designed rate control strategy can improve overall picture quality for video transmission over a constant bit rate channel and the rate control method is not a normative part of MPEG-video standard, the performance of MPEG video codec can be quite different depends on how to implement the rate control scheme. The rate control scheme proposed in MPEG show good results when scene changes is not occurred. But it has weakness that it does not properly handle scene-changed pictures. Therefore picture quality after scene change is deteriorated, and possibility of overflow occurrence becomes high. In this paper, a new method for detection of scene change occurrence using local variance and a new determination scheme for adaptive quantization parameter, mqunt, which can consider local characteristic of an image by using previously computed the local variance from the scene change detection part are proposed. IN addition, and adaptive rate control scheme which can handles scene changed picture very efficiently by scene-changed picture is proposed. Computer simulations are performed to verify the performance of the proposed algorithm. The suggested detection algorithm precisely detected scene change. And the proposed rate control scheme shows better rate control performance as compared with that of the conventional MPEG scheme.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.691-700
• /
• 2003

Due to the fast development of wire&wireless internet and computer hardware, more and more internet services are being developed, such as Internet broadcast, VoD (Video On Demand), etc. So QoS (Qualify of Service) is essentially needed to guarantee the quality of these services. Traditional Internet is Best-Effort service in which all packets are transported in FIFO (First In First Out) style. However, FIFO is not suitable to guarantee the quality of some services, so more research in QoS router and QoS protocol are needed. Researched QoS router and protocol are high cost and inefficient because the existing infra is not used. To solve this problem, a new QoS control method, named Network Adaptive QoS, is introduced and applied to client/server-based streaming systems. Based on network bandwidth monitoring mechanism, network adaptive QoS control method can be used in wire&wireless networks to support QoS in real-time streaming system. In order to reduce application cost, the existing streaming service is used in NAQoS. A new module is integrated into the existing server and client. So the router and network line are not changed. By simulation in heavy traffic network conditions, we proved that stream cannot be seamless without network adaptive QoS method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.24-35
• /
• 2012

In this paper, we propose a dynamic lane control scheme with a traffic predictor module and a rate controller for reconciling with commercial optical PHY modules in energy efficient optical Ethernet systems. The commercial high speed optical Ethernet system capable of 40/100Gbps employs 4 or 10 multiple optical transceivers over WDM or multiple optical links. Each of the transceivers is always turned on even if the link is idle. To save energy, we propose the dynamic lane control scheme. It allows that several links may be entirely turned off in a low traffic load and frames are handled on the remaining active links. To preserve the byte order even if the number of active links may be changed, we propose a rate controller to be sat on the reconciliation sublayer. The main role of the controller is to insert null byte streams into the xGMII of inactive lanes. For the PHY module, the null input streams corresponding to inactive lanes will be disregarded on inactive PMDs. It is very handy to implement the rate controller module with MAC in FPGA without any modification of commercial PHYs. It is very crucial to determine the number of active links based on the fluctuated traffic load, we provide a simple traffic predictor based on both the current transmission buffer size and the past one with different weighting factors for adapting to the traffic load fluctuation. Using the OMNET++ simulation framework, we provide several performance results in terms of the energy consumption.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.100-110
• /
• 2001

In this paper, we investigated several buffer management schemes for the design of shared-memory type ATM switches, which can enhance the utilization of switch resources and can support quality-of-service (QoS) functionalities. Our results show that dynamic threshold (DT) scheme demonstrate a moderate degree of robustness close to pushout(PO) scheme, which is known to be impractical in the perspective of hardware implementation, under various traffic conditions such as traffic loads, burstyness of incoming traffic, and load non-uniformity across output ports. Next, we considered buffer management strategies to support QoS functions, which utilize parameter values obtained via connection admission control (CAC) procedures to set tile threshold values. Through simulations, we showed that the buffer management schemes adopted behave well in the sense that they can protect regulated traffic from unregulated cell traffic in allocating buffer space. In particular, it was observed that dynamic partitioning is superior in terms of QoS support than virtual partitioning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.779-792
• /
• 1993

In a switching node or an ATM multiplexer of the ATM network, a good bandwidth utilization can be achieved by the priority control using the 1-bit(Cell Loss priority) in ATM cell header. In this paper, the mixed mechanism is proposed to make up for shortcomings of existing space priority control mechanisms and to decrease the loss probability of high priority cell and its performance is analyzed about the cell loss probability. To estimate the performance of proposed mixed mechanism, its cell loss probability is compared with those of non-priority mechanism, push-out mechanism and partial buffer sharing mechanism. The cell loss probability is analyzed using a M/D/1/N modeling and a 2-state MMPP/D/1/N modeling and also comparison between two modelings is made. To verify this result of numerical analysis, the computer simulation is performed for each mechanism using the simulation language, SIMSRIPT II.5.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.218-226
• /
• 2001

The MPEG-2 Test Model 5 (TM5) algorithm is widely used for bit rate control. In TM5, however, the target number of bits and the number of actual coding bits for each picture do not match well. Therefore, buffer overflow and picture quality degradation may occur at the end of the GOP. In this paper, we propose a new bit rate control algorithm for matching the target and the actual coding bits based on accurate bit allocation. The key idea of the proposed algorithm is to determine quantization Parameters which enable us to generate the number of actual coding bits close to the target number of bits for each picture, while maintaining uniform picture quality and supporting real-time processing. The proposed algorithm exploits the relationship between the number of actual coding bits and the number of estimated bits of the previous macroblock.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1393-1400
• /
• 2006

This paper optimizes the access probabilities (APs) in a network resource allocation scheme based on access probabilities in order that the waiting time and the blocking probability are minimized under the given constraints, and obtains its performance. In order to optimize APs, an infinite number of balance equations is reduced to a finite number of balance equations by applying Neuts matrix geometric method. And the nonlinear programming problem is converted into a linear programming problem. As a numerical example, the performance measures of waiting time and blocking probability for optimal access probabilities and the maximum utilization under the given constraints are obtained. And it is shown that the scheme with optimal APs gives more performance build-up than the strategy without optimization.