• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.38-45
• /
• 2001

Numerical studies were carried out to develop the moment magnifier method for long-term behavior of flat plates, subjected to combined in-plane compressive and transverse loads. Nonlinear finite element analyses were performed for the numerical studies. Through the numerical studies, the long term behavior of the flat plate subjected to uniform or nonuniform floor load was investigated, and creep effects on the degradation of strength and stiffness of the slabs were examined. As a result, the creep factor was implemented to describe the creep effect on the flat plate. The moment magnifier method using the creep factor was developed for long-term behavior of flat plates. Also, the design examples were shown for the verification of the proposed design method.

• Journal of the Korean Society of Costume
• /
• v.34
• /
• pp.67-78
• /
• 1997

We executed the wearing test in order to revise the basic Beosun pattern for five kinds of foot type. And we took sensory test to evaluated that revisions. The result were as follows: 1. The characteristics of slender foot is that the foot circumference III is short as compared with foot length. So Kou of basic Beosun is sharp-pointed Hoimok and beosunmok are broad. For slender foot we took down ou of Beosun and use foot cir-cumference III/2-1.5cm as Hoimok like the part shown in dotted line of Fin 6. 2. The characteristics of broad foot is that the foot circumference III is long as comparison with foot length. So Kou of ba-sic Beosun is stubby Hoimok and Beosunmok are narrow. For broad foot we took up Kou of Beosun put foot circum-ferenceI /2-1.5cm for the width of Apbol and circumfernce III 2/-1.5cm for Hoimok like the part shown in dotted line of Fig. 8. 3. because the arch of flat foot is flat the sole of basic Beosun is not suitable to the flat foot. It developes on wrinkles of Duichuk and sole. For flat foot we took down Hom of the basic Beousun like the part shown in dotted line of Fig. 10. 4 We evaluated the revisions of basic Beousun for foot types were useful in senso-ry test.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.129-142
• /
• 1996

This paper pursues a comparative study on the design and function of the ready-made Bo-Son and the Bo-Son Pattern based on teaching and learning materials. It intends to investigate whether the Bo-Son is designed to suit to Kinetics of foot or to give the ease of wearing and taking off. The following results came out through trial wearing. 1) The Bo-Son pattern suggested in teaching materials can not satisfy the wearers with partial modification due to design problem. On the other hand, the ready-made Bo-Son can satisfy them with partial modification. 2) The important factor in designing the pattern of Bo-Son is the posture of foot when putting on it, that is, the height of the heel of the foot from the floor, the length of the heel, the length of toe and the bending angle of toe. 3) As a result of this study, in the design of the improved Bo-Son pattern, it is most suitable when the size of foot is 230mm, the height of the heel of the foot is 12.5cm, and and angle of the front toe of a sock is 35$^{\circ}C$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2010

Bending fatigue of aluminium alloy was characterized by acoustic nonlinearity of narrow band laser-generated surface wave. The higher harmonic components generated intrinsically by arrayed line laser beam were analyzed theoretically and acoustic nonlinearity was measured successfully on the surface of fatigue damaged aluminium 6061 alloy. The acoustic nonlinearity increased as a function of fatigue cycles and has close relation with damage level. Consequently, the nonlinear acoustic technique of laser-generated surface wave could be potential to characterize surface damages subjected to fatigue.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.18-27
• /
• 2005

Airfoils with improved longitudinal static stability were designed for a WIG craft through aerodynamic design optimization. The response surface method is coupled with NURBS-based shape functions and Navier-Stokes flow analysis. The procedure runs in the network-distributed design framework of commercial-code based automated design capability to enhance computational efficiency and robustness.Lift maximization design maintaining similar static margin to a DHMTU airfoil successfully produced a new airfoil shape characterized by pronounced front-loading and the well-known reflexed aft-camber line. Another airfoil design of lower variation in pitching moment during take-off showed weakened front-loaded characteristics and hence decreased lift slightly. Investigations using the present design methodology on an existing optimization result based on potential flow analysis and NACA-type geometry generation demonstrated significance of carrying various geometry generations and more realistic flow analysis with optimization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.424-432
• /
• 2011

Shape parameters and design variables for a centrifugal compressor impeller were investigated for optimizing a centrifugal compressor. In order to compare the performance of an optimized impeller with the performance of the original impeller, an already tested impeller was chosen and design variables for optimization were selected. The meridional shapes at the shroud and at the hub were re-designed using the Bezier curve. The camber-lines of the impeller blade at the hub and at the tip were also expressed by the Bezier curve. The shape curves for impeller could be expressed using 6-8 control points. Among them, eight control points which have strong effect to the shape can be selected as design variables for optimization. Therefore, any impeller which is expressed by data points for its shape can be optimized using few design variables.

• Conservation Science in Museum
• /
• v.18
• /
• pp.19-34
• /
• 2017

Analysis of the species of wood in the wooden materials and the chemical composition of the fabric of the clothing excavated from the tomb of Yi Jing (1580-1642) has determined that the wooden materials, including the coffin (內棺, naegwan), burial chamber(外棺, oegwan), chilseongpan(七星板, bottom-lining board), and fan-shaped slats were made of pine(Pinus densiflora). The analysis of the fabrics suggested that the cloth attached to the fan-shaped slats, the funeral banner with inscriptions, and the five pouches for the corpse (五囊, onang) were all made of silk. The jacket was made of plain-weave cotton, while the inner and outer cloth of the socks were made of cotton and hemp, respectively. Among the silk items, the pouches for the left and right feet (constituting the five pouches for the corpse) were made from a satin-weave figured silk, while the other silk items were made of ju(紬), or plain-weave silk fabric. Infrared analysis revealed that the fan-shaped slats were decorated with cloud patterns across the entire surface, while the funeral banner and the five pouches for the corpse bore ink inscriptions.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.68-89
• /
• 2021

In August 1837, a list of wedding gifts was given by Queen Sunwon (1789-1857) to her son-in-law, Namnyeong-wie, Yun Eui-Seon (1823-1887) at the wedding of Princess Deok-on (1822-1844). This Honsubalgi is now kept at the National Hangeul Museum. This text was used in the present study to examine the everyday clothes of the royal son-in-law in the early 19th century. First, the everyday clothes were organized into about 36 types. They were classified as tops, bottoms, hats, accessories, belts, pouches, fans and shoes. Second, the most important clothes were the ordinary formal attire, composed of the namgwangsa dopo and namgwangcho changui. As for the bottoms, the pants, the Chinese hemp leggings, two pairs of socks, the green silk belt, and a pair of light blue ankle ties were identified. Third, as for the head and accessories, there were heukrip, with the gemstone string and silk string, the jeong-ja-gwan and dong-pa-gwan, as well as tang-geon and bok-geon. And there were the sangtu-gwan, three types of donggos, and the mang-geon equipped with okgwanja. On the other hand, the jeong-ja-gwan and dong-pa-gwan are peculiar hats whose status has changed over time since the mid-18th century. The fact that the jeong-ja-gwan and dong-pa-gwan were given to Namnyeong-wie showed that the status of these hats improved in the early reign of King Heonjong. The belt was given with the sejodae that is suitable for the dangsang, the coral plates, and the silk bag containing a flint pouch. Fourth, there were the red-colored sejodae, a ssamji silk pouch for flint and the fan decorated with okseonchu, and shoes, such as unhye and danghye.