• Journal of radiological science and technology
• /
• v.43 no.4
• /
• pp.243-249
• /
• 2020

Examination with medical radiography is the most significant advances in medicine in the 21st century. Diagnostic imaging occupies an important position in all medical subjects, surgical and internal medicine, including radiology, orthopedics, and neurosurgery. However, the invention associated with conventional radiography devices has focused only on emphasizing the efficient aspects of the examination or obtaining clearer images without considering the age and disease-induced constraints of the patient's posture. The newly developed X-ray aids to solve this problem can effectively perform X-ray imaging of children's who have difficulty communicating and controlling. It is also thought to be a good way to provide accurate imaging information and minimize radiation exposure for children.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.529-538
• /
• 2002

콤바인 곡물 포대 자동화장치개발은 콤바인 운전자 및 작업자의 피로경감과 안전보호 및 작업성능의 향상을 기하기 위하여 행하여 졌으며, 본 연구의 개발은 기존의 콤바인 작업이 2명이 소요되는 것을 운전자 1명이 수확작업을 할 수 있도록 하며, 노동력의 절감과 작업의 편리성을 도모하고자 하였다. 이러한 본 연구의 결과는 다음과 같다. 1) 곡물 포대의 정 위치화를 위해서 용량형 근접위치센서를 설치하였으며, 포대의 과다이송에 따른 모터의 부하를 최소화 하기위해 선단부와 슈트부에 각각 위치센서를 설치하여 포대의 위치를 제어하였다. 2) 곡물 투입장치부의 작동은 공기압축기와 공압실린더를 이용한 공압시스템을 사용하였으며, 곡물의 투입량제어는 슈트부 게이트의 열림시간을 제어하여, 곡물의 투입량을 제어하였다. 3) 포대 배출장치는 이송장치로부터 이송되어진 충진된 포대를 제 2의 포대가 충진하는 영역 밖으로 밸트 컨베이어를 이용 이송하도록 하였다. 4) 포대는 B3 포대의 경우가 가장 투입량이 많은 것으로 나타났으며, 가진을 한 경우가 하지 않은 경우보다 비교적 투입량이 많은 것으로 나타났다. 본 연구에서 개발된 포대 자동화장치에서는 포대의 가진 장치를 장착하지 않았으며, 실험은 인위적으로 가진을 하여 실행하였으며, 향후 전체적인 장치의 성능 향상을 위해서 포대의 가진 장치가 필요한 것으로 나타났다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.130-136
• /
• 2018

This study develops a seat with electric motor technology for a one-ton grade commercial vehicle. While applying electric motor technology, the FMVSS 210 seat frame strength test is also conducted to examine the product's weak parts. The seat frame strength test used the FMVSS 210 test standard and the ANSYS program was used to simulate the test and identify weak parts in the deformation and strain values. The test results showed that the cushion frame and slide rail connection bracket were fractured at loads of about 10,000 N. Similarly, the maximum stress and strain values in the bracket were obtained in the simulation results. On this basis, it was evaluated that the connection part bracket was a considerably weak part in the case of the first model, and changing the shape of the bracket and reinforcing the strength were required. In addition, the seat belt anchorage test results and simulation results were compared to assure their validity. In the comparison results, the error for each is about 5-10%. Therefore, the simulation performed in this study is considered to have produced reasonably accurate results.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.236-248
• /
• 2019

Green belts can help to set boundary for city growth, provide ecological protection system and enhance the resilience of Beijing. During the implementation period of the current overall city planning of Beijing, the proportion of green space varies much among the sub-districts, villages and towns involved in the two green belts in the research. With this as starting point, by researching the correlations of 'city system factors' and 'planning policy factors' with the change in the scale of green space, the paper discussed the influential factors of implementing the planning of green space of Beijing, and conducted quantitative research, with such possible influential factors classified into 'city system factors' and 'planning policy factors'. Through multiple linear regression model, the paper tested the correlations of city system factors and planning policy factors (independent variable) with the increment in the construction land in green belts (dependent variable). Through influence to population aggregation and the expansion force of construction land, city system factors such as mountain land and water, house rent of unit area, accessibility of public transport and the newly-defined state-owned construction land generate correlation with the change in the scale of construction land in green belts.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.141-146
• /
• 1995

Changes of physicochemical properties of citron juice prepared by two different extraction methods, rotary-crushing and belt-pressing method, were investigated during the storage at $5^{\circ}C$ and $-20^{\circ}C$. Temperature drop of citron juice extracted by belt-pressing method was faster than that of citron juice prepared by rotary-crushing method and its freezing point was $0.8{\sim}0.9^{\circ}C$. During the storage, pH of stored citron juice with rotary-crushing method was increased up to 3.5 after 6 months storage while that of citron juice extracted by belt-pressing method was not changed significantly during the same storage time. Acidity of rotary-crushed citron juice was reduced a little more than that of belt-pressed citron juice during the storage. However, changes of soluble solid content were influenced largely by the storage temperature than by the extraction method. Contents of formol nitrogen and vitamin C were reduced remarkably in all of stored citron juice and $92{\sim}82%$ of farmol nitrogen and $72{\sim}43%$ of vitamin C were remained after 6 months of storage. Among the changes of color value, L values were reduced in the whole stored citron juice and a and b value had a different change pattern respectively according to the extraction and storage temperature. Changes in the content of both amino acid and fatty acid compositions was also observed after same storage period. Especially, in the case of change of fatty acid composition, content of linoleic acid and linolenic acid were reduced after 6 months storage, while those of palmitic acid, stearic acid and oleic acid were increased.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.160-166
• /
• 2018

The worldwide semi-conductor market has been growing for a long time. Manufacturing lines of semi-conductors need to handle several types of toxic gases. In particular, they need to be controlled accurately in real time. This type of toxic gas control system consists of many different kinds of parts, e.g., fittings, valves, tubes, filters, and regulators. These parts obviously need to be manufactured precisely and be corrosion resistant because they have to control high pressure gases for long periods without any leakage. For this, surface machining and hardening technologies of the metal block and metal gasket need to be studied. This type of study depends on various factors, such as geometric shapes, part materials, surface hardening method, and gas pressures. This paper presents strong concerns on a series of simulation processes regarding the differences between the inlet and outlet pressures considering several different fluid velocity, tube diameters, and V-angles. Indeed, this study will very helpful to determine the important design factors as well as precisely manufacture these parts. The EP (Electrolytic Polishing) process was used to obtain cleaner surfaces, and hardness tests were carried out after the EP process.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.85-91
• /
• 2021

Aggregate waste separator with rotating separating net was designed for applying classification process of construction waste. In order to evaluate the performance of the aggregate waste separator, according to the type of waste, standardized waste samples are prepared using acrylic. The appropriate operating point was evaluated by the classification efficiency and misclassification rate of recycled aggregate according to the control frequency of the blower operating and inlet position of the separating net. The classification efficiency at the operating point of the aggregate waste separator was evaluated through flow analysis assuming recycled aggregate and waste sample as particles. As a result of the performance test, when the distance. between the conveyor belt and the inlet was 0.2m, the classification efficiency was 95%, but the misclassification rate of recycled aggregate was 2% or more, which satisfies the classification efficiency and the misclassification rate of less than 2%. The operating point was shown at a control frequency of 58Hz at a suction distance of 0.254m. As a resu lt of flow analysis, there was no misclassification of recycled aggregate. In order to redu ce constru ction waste in the existing recycled aggregate production process, adsorption system using a rotating separating net that can be operated as an installation type was built.