• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.180-183
• /
• 2006

엔진 밸브와 밸브시트의 마모는 엔진 성능에 영향을 미치는 가장 중요한 요소 중에 하나이다. 엔진 밸브와 밸브시트는 엔진 구동 과정에서 발생하는 고온의 배기가스, 밸브 스프링의 빠른 움직임, 엔진 폭발 과정의 고압, 균일하지 못한 냉각시스템으로 발생하는 실린더 헤드의 뒤틀림이 만들어 내는 극한 환경을 이겨내야 한다. 본 연구에서는 밸브 및 밸브시트의 마모율과 마모 메카니즘을 명확하게 규명하기 위해서 실제 자동차 엔진 내부의 조건인 온도, 밸브와 밸브시트간의 충돌, 스라이딩 등에 관한 것들을 고려하여 밸브 및 밸브시트가 충돌 시험할 수 있는 전용마모 시험기를 사용하였다. 본 연구에 사용된 시편은 현재 실차에 사용되고 있는 밸브와 밸브시트를 사용하였다. 그 종류는 STR35 밸브, STL #6 및 STL #32이다. 밸브시트는 HVS1-2 재질을 사용하였다.

• 한국기계연구소 소보
• /
• s.11
• /
• pp.29-38
• /
• 1984

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.42-50
• /
• 2001

In this paper, the effects of scale formation in engine water jacket upon the thermal durability of engine itself and its component parts were studied. To understand the effect of quality of water, a full load engine endurance test for 50 hours was carried out with not-treated underground water. The followings were found through the tested engine inspection after the endurance test; 1-2 mm thick scale formation in the engine water jacket, valve seat wear, piston top land scuffing, piston pin stick, and cylinder bore scuffing in siamese area. In order to understand the causes of above test results, the heat rejection rate to coolant, the metal surface temperature of combustion chamber, and the oil and exhaust gas temperatures were measured and analyzed. The scale formed in the engine water jacket played a role as thermal insulator. The scale formed in the engine reduced the heat rejection rate to coolant and it caused to increase the metal surface temperature. The reduced heat rejection rate to coolant increased the heat rejection rate to oil and exhaust gas and increased the oil and exhaust gas temperature. Also, the reasons of valve seat wear, piston top land scuffing and cylinder bore scuffing, and piston pin stick quantitatively analyzed in this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.1-8
• /
• 2004

In this paper we present the effects that valve train design parameters and operating conditions have on the valve rotation properties of a diesel engine. Rotation of intake and exhaust valves are very closely related to the long term durability of diesel engines. of the valves do not rotate even at a rated engine speed, it causes the uneven wear of the valve seat and valve head contact area, which eventually shortens the engine life. Because the rated speed of a diesel engine is relatively lower than that of a gasoline engine, the operating condition of a diesel engine produces tough environment for valve rotation. Therefore, the valve rotation is an important problem which should be solved in the early stage of engine development. In this study, we developed a new technique to measure the valve rotation and shaking motion simultaneously using three proximity sensors. Valve train rotating properties of a diesel engine were measured under various engine operating conditions.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.14-19
• /
• 2013

This paper presents an experimental study on the safety of a valve for a special gas cylinder. The test valves that were randomly dismantled from the special gas cylinder were experimented on the gas leakage and operation safeties. The crack, wear and deformation of the valve body, screw thread, safety disk, vent hole, stem and handle components that may affect to the gas leakage safety of a used valve were not found in this experimental study. A painted handle of a valve was partly stripped from the coated surface, and the surface of PT screw of a used valve body was rusted. But, these paint and rust problems do not affected to the gas leakage safety of used valves. And there was no gas leakage in the dismantled valve, and the permanent deformation and partial scars of a valve stem and O-rings were observed on the rubbing surfaces. Thus, the valve seat and O-rings are recommended to be replaced for a gas leakage safety of a dismantled valve. And it is necessary to repair and inspect handle fastening forces for a safe opening and closing operations of a valve.