• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.8-14
• /
• 2008

The effects of calcium type catalysts addition on the thermal decomposition of low density polyethylene (LDPE) and ethylene vinyl acetate (EVA) resin have been studied in a thermal analyze. (TGA, DSC) and a small batch reactor. The calcium type catalysts tested were calcinated dolomite, lime, and calcinated oyster shell. As the results of TGA experiments, pyrolysis starting temperature for LDPE varied in the range of $330{\sim}360^{\circ}C$ according to heating rate, but EVA resin had the 1st pyrolysis temperature range of $300{\sim}400^{\circ}C$ and the 2nd pyrolysis temperature range of $425{\sim}525^{\circ}C$. The calcinated dolomite enhanced the pyrolysis rate in LDPE pyrolysis reaction, while the calcium type catalysts reduced the pyrolysis rate in EVA pyrolysis reaction. In the DSC experiments, addition of calcium type catalysts reduced the melting point, but did not affect to the heat of fusin. Calcinated dolomite reduced 20% of the heat of pyrolysis reaction. In the batch system experiments, the mixing of calcinated dolomite and lime enhanced the yield of fuel oil, but did not affect to the distribution of carbon numbers.

• Mineral and Industry
• /
• v.19 no.2
• /
• pp.40-42
• /
• 2006

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1261-1271
• /
• 2019

In case of Korea, limestone is very useful in various industries. These limestones are mainly produced in Gangwon-do. The study area, which is located in Okgye-myeon, Gangneung-si, Gangwon-do, is Okcheon metamorphic belt where abundant limestone, dolomite stone, and high-grade limestone are produced. The purpose of this study is to distinguish between calcite and dolomite among the limestone which is one of the representative carbonate rocks using the spectral characteristics. For this study,spectral characteristics were measured in the field and laboratory using FieldSpec® 3 spectrometer equipment from Analytical Spectral Device Inc. (ASD). In the field, the reflectance was measured below 50 cm from rock surface, and in the laboratory, the reflectance was measured in the rock surface, the polished surface, and the rock powder. As a result, absorption wavelengths of calcite and dolomite were significantly different around 2,330 nm. In particular, the absorption wavelength band position of dolomite appeared before 2,330 nm wavelength compared to calcite. The study could be used as a basis data for analysis of high-grade calcite limestone.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.1
• /
• pp.37-40
• /
• 2012

• Magazine of RCR
• /
• v.12 no.4
• /
• pp.55-62
• /
• 2017

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.443-451
• /
• 2012

Wastewater treatment plants need to reduce phosphorus in order to meet increasingly stringent regulations on phosphorus. This study evaluated the feasibility of dolomite as a coagulation aid to enhance phosphorus removal from secondary treated wastewater by chemical coagulation. Standard jar tests were conducted to evaluate the effect of dolomite addition on a coagulation process for phosphorus removal and to determine the optimum doses of coagulants and dolomite. Coagulants used with dolomite yielded a significant improvement in phosphorus removal and reduced total phosphorus concentrations below 0.02 mg/L in wastewater effluent. Dolomite has played an important role in enhancing phosphate adsorption and increasing pH, as a coagulation aid. The maximum removal efficiency of phosphorus in this study was yielded at 25 mg/l of dolomite and 20 mg Al/L of PAC dose. However, considering economic aspects, the optimum doses of dolomite and PAC were 10 mg/L and 15mg Al/L, respectively. Consequently, dolomite, a coagulation aid, can be used in coagulation processes to enhance the removal of phosphorus.

• Proceedings of the Petrological Society of Korea Conference
• /
• 2006.05a
• /
• pp.29-29
• /
• 2006

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.95-103
• /
• 1993

The geology of the talc ore deposits in the Chungju area consists of the Kyemyeongsan Formation, the Munjuri Formation, the Daehyangsan Quartzite, the Hyangsanni Dolomite, and the basic rocks of the Ogcheon belt. The talc ore occurs in the Hyangsanni Dolomite near the Daehyangsan Quartzite The mineral assemblages in the Hyangsanni Dolomite are \circled1calcite-tremolite-talc-quartz, \circled2calcite-talc-quartz, \circled3tremolite-calcite-dolomite, and \circled4calcite-dolomite-phlogopite-chlorite. Talc has almost the ideal composition($X_{Mg}$=Mg/(Fe+Mg)=0.98). Talc was formed in siliceous dolomite by the medium-pressure type regional metamorphism. The evidences for contact metamorphism and/or hydrothermal reaction are not clear. The metamorphic grade of the Hyangsanni Dolomite and its adjacent pelitic or basic rocks near the deposits corresponds to epidote-amphibolite facies or greenschist facies based on the, mineral assemblages of \circled1hornblendebiotite-muscovite-epidote-quartz \circled2biotite-chlorite-quartz, and \circled3hornblende-actinolite-plagioclasequartz. The formation of the talc deposits were caused by the following reactions due to greenschist facies metamorphism of siliceous-dolomitic rocks in the Hyansanni Dolomite. (I) 3 dolomite+4 quartz+$H_2O$= talc+ 3 calcite +3 $CO_2$; (11) 3 tremolite+ 2 $H_2O$+ 6 $CO_2$= 5 talc+ 6 calcite + 4 quartz. The minimum temperature of the talc-tremolite-quartz assemblage is about $434^{\circ}C$ from calcite thermometry and the carbon dioxide mole fraction in metamorphic fulid($X_{$CO_2$}$) is about 0.1 at assumed pressure, 3 kbar.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.783-791
• /
• 2015

A fluidized-bed reactor with an inside diameter of 0.1 m and a height of 1.2 m was used to study the effect of steam and catalyst additions to air-blown biomass gasification on the production of producer gas. The equipment consisted of a fluidized bed reactor, a fuel supply system, a cyclone, a condenser, two receivers, steam generator and gas analyzer. Silica sand with a mean particle diameter of $380{\mu}m$ was used as a bed material and calcined dolomite ($356{\mu}m$), which is effective in tar reduction and producer gas purification, was used as the catalyst. Both of Korea wood pellet (KWP) and a pellet form of EFB (empty fruit bunch) which is the byproduct of Southeast Asia palm oil extraction were examined as biomass feeds. In all the experiments, the feeding rates were 50 g/min for EFB and 38 g/min for KWP, respectively at the reaction temperature of $800^{\circ}C$ and an ER (equivalence ratio) of 0.25. The mixing ratio (0~100 wt%) of catalyst was applied to the bed material. Air or an air-steam mixture was used as the injection gas. The SBR (steam to biomass ratio) was 0.3. The composition, tar content, and lower heating value of the generated producer gas were measured. The addition of calcined dolomite decreased tar content in the producer gas with maximum reduction of 67.3 wt%. The addition of calcined dolomite in the air gasification reduced lower heating value of the producer gas. However The addition of calcined dolomite in the air-steam gasification slightly increased its lower heating value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.215-218
• /
• 1998

The thermal stability of polyaniline-camphorsulfonic acid(PANI-CSA) film was studied as a function of temperature and time. A decrease in electrical conductivity of PANI-CSA film occurred when PANI-CSA film is subjected to temperature above 60$^{\circ}C$. From the result of thermogravimetry (TG), it was thought that the deterioration in electrical conductivity of PANI-CSA film was due to evaporation of water and residual solvent.