• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.205-210
• /
• 2000

Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

• Journal of Adhesion and Interface
• /
• v.14 no.4
• /
• pp.175-182
• /
• 2013

In this work, we aim to investigate the specific gravity, thermal, and mechanical property changes of solid-state extruded polypropylene (PP)/calcium carbonate composites before and after orientation. For this work, we prepared $PP/CaCO_3$ composites having two different sizes (OM-1 and OM-10). On increasing the filler content, the specific gravity of the composites increases. The specific gravity of the oriented specimen containing filler in PP matrix is found to be much smaller than that of pre-specimen due to the formation of more microvoids. The presence of microvoids in case of oriented composite specimen significantly affected the tensile and flexural properties of the composites. It was observed that the effect of orientation on both flexural strength and modulus is much stronger than the effect of filler contents, regardless of the filler particle size.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.413-417
• /
• 2005

Orientations of liquid crystal molecules on a surface of a film of photoreactive polyvinylcinnamate were investigated in order to apply as an alignment layer of LCD. When the polyvinylcinnamate film was exposed to linearly polarized W light, optical anisotropy was induced in the film through a selective photoreaction. Liquid crystal molecules on a surface of the film was aligned along the oriented polymer chain direction through intermolecular interactions. Thermal and light stability of the photoaligned LC cell were studied by investigating LC alignment changes after the alignment layer was treated with heat and W light. When the film was exposed with linearly polarized UV several times, the LC alignment was induced only along the final UV exposure direction.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.457-457
• /
• 2011

단일벽 탄소나노튜브(SWNTs)는 직경 및 키랄(chiral)특성에 따라 반도체성 튜브와 금속성 튜브로 구분되며, 작은 직경의 SWNTs는 큰 직경의 튜브에 비하여 일반적으로 기계적 특성이 뛰어나다고 알려져 있다. 따라서, 합성하는 단계에서 SWNTs의 직경 및 chiral 특성의 제어가 가능 하게 된다면 전자소자로의 응용을 한층 앞당길 수 있을 것으로 예상하고 있다. 이와 더불어 SWNTs의 수평배향성장은 SWNTs의 집적(integration)을 용이하게 할 수 있기 때문에 향후 나노전자소자 개발을 목표로 최근 많은 연구결과들이 보고되고 있다. 하지만 현재는 SWNTs가 고밀도로 합성되기 때문에, 우수한 개별 (individual) SWNT의 전기적 특성보다는 집단적(ensemble) 특성을 얻고 있다. 따라서, 합성기판 위에서 개별적인 SWNT를 낮은 밀도로 수평배향 성장하는 일은 향후 나노튜브기반의 고성능 전자소자 개발에 중요한 과제이다. 나아가, 수평배향 성장 된 개별 SWNT의 직경 및 키랄 특성까지 함께 제어할 수 있다면 곧바로 응용에 적용할 수 있는 획기적인 기술이 될 것이다. 본 연구에서는, SWNTs의 수평배향도 및 직경을 제어하여 성장시키는 것을 목표로 하였다. 합성기판은 퀄츠를 이용하였고, 합성촉매로는 나노입자의 밀도를 비교적 쉽게 제어할 수 있고, 균일한 크기를 갖는 페리틴 단백질을 이용하였다. 단분산(monodispersion) 된 촉매 나노입자를 얻기 위해서 스핀코팅 조건과 페리틴 용액농도를 조절하여 퀄츠기판 위에 분산시킨 후, 아르곤 분위기 하에 열처리를 통하여 촉매 나노입자의 크기 감소를 유도하였다. 그 결과 열처리 시간이 증가함에 따라 촉매 나노입자의 크기가 감소하는 것을 알 수 있었고, SWNTs의 직경 또한 감소하는 것을 확인하였다. 또한 퀄츠기판 위에 직경제어 합성 된 수평배향 SWNTs를 다른 기판으로 전사하는 기술을 확립함으로써, 향후 SWNTs기반의 소자 제작기술의 바탕을 마련하였다.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.393-398
• /
• 2007

We studied the mechanism of liquid crystal alignment on polyvinylfluorocinnamate (PVCN-F) films which were irradiated by UV using polarized fourier transform infrared (FT-IR) spectroscopy and ultraviolet/visible (UV/Vis) spectroscopy. UV irradiation of PVCN-F films caused decrease of vinylene -C=C- stretching peak area at $1638cm^{-1}$ and shift of conjugated C:0 stretching vibration at $1712cm^{-1}\;to\;1734cm^{-1}$ which is caused by nonconjugated C=O stretching nitration. To study the orientation direction of 5CB liquid crystal (LC) molecules in the liquid crystal cell with PUV irradiation, rubbing treatment or without any treatment on the PVCN-F alignment layer, we used polarized FT-IR dichroism technique. We successfully measured 5CB LC alignment directions, which are perpendicular to the irradiated PUV polarization direction and parallel to the rubbing direction in the liquid crystal cell without using dichroic dyes.

• Journal of Adhesion and Interface
• /
• v.9 no.4
• /
• pp.30-33
• /
• 2008

Two polymeric interfaces with single component homo-polymers were prepared to control the orientation of block copolymer thin-film nanostructures. Poly(4-acetoxy styrene) (OH-PAS) and poly(4-methoxy styrene) (OH-PMS) which have the average chemical composition of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) were precisely synthesized through nitroxide-mediated radical polymerization. After dehydration reactions between above polymers and SiOx layers of silicon wafers, the polymer-modified interface induced partial (30%) vertical orientation of PS-b-PMMA thin film in the case of OH-PMS and wholly parallel orientation in the case of OH-PAS. Chemical compositions of polymeric interface layers are regarded as the key parameter to control the orientation of nanostructures of block copolymer thin film.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.53-53
• /
• 1996

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.98-99
• /
• 1994

• Membrane Journal
• /
• v.28 no.5
• /
• pp.340-350
• /
• 2018

In the present study, crystallographically b- and c-axis oriented mordenite zeolite membranes were prepared and their pervaporative ethanol dehydration was investigated. The seed layer with a high coverage grew to be c-axis oriented dense layer, while the seed layer with a low coverage grew to be b-axis oriented layer. This phenomenon could be explained by the evolutionary selection growth mechanism. The b-axis grown membrane with 8-membered rings showed a high separation factor of above 1000 and a considerable total flux of around $0.2kg/m^2h$. The c-axis grown, columnar structured membrane with 8- and 12-membered rings showed a low separation factor of less than 200 and a relatively high total flux of around $0.25kg/m^2h$. The high performance of b-axis grown membrane was due to the relatively small opening of 8-membered rings. Water molecules can freely permeate through the openings, but ethanol molecules, difficultly. Therefore, in the present study, we introduced a new method to control crystallographic orientation of mordenite membrane by changing seeding amount of needle-like crystals, and elucidated that b-axis oriented mordenite membrane showed better performance than c-axis grown mordenite membrane.