• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.77-78
• /
• 2014

기존 대용량 전원 회로는 상용 전원 조건에서 AC Line 입력 전류가 높아져 누전기가 차단되는 문제가 있다. 그 뿐만 아니라 입력 전류가 높아지면 기존 전력 설비 용량이 부족한 경우가 발생하여, 전력 설비 교체 등 공사의 필요가 있다. 따라서 기존의 전력 설비를 그대로 이용하면서 단상 AC 전원의 허용 한계를 넘는 대용량 전력을 구동할 수 있는 방안을 제안한다. 역률개선회로에 전력 제한 기능을 구현하여 입력 전류를 제한하는 방법과 부족한 전력을 배터리 충/방전 회로를 이용해 보충하는 방안을 제안하며, 제안된 회로의 분석을 수행하고, 1.2KW 급 시작품을 이용한 실험적 분석을 통해 그 가능성을 검증한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.1
• /
• pp.15-22
• /
• 2014

Recently, parallel operation of dc-dc converters has been widely used in distributed power systems. In this paper, a control method to achieve parallel operation of three-phase bi-directional isolated interleaved dc-dc converters is discussed for the battery charging and discharging system which consists of the 32 battery charger/dischargers and two three-phase bi-directional isolated interleaved dc-dc converters. In the boost mode, the battery energy is delivered to the grid, whereas the grid energy is transferred to the battery in the buck mode operation. The average current sharing control method is employed to obtain an equal conducting of each phase current in the three-phase dc-dc converter. By using the proposed method, the imbalance factor is gratefully reduced from 8 percent to 1 percent. Two 2.5kW three-phase bi-directional dc-dc converter prototype have been built and the proposed method has been verified through experiments.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1377-1379
• /
• 2005

독립형 태양광 발전시스템은 태양전지, 배터리, 충 방전 제어기, 컨버터, 부하로 나눌 수 있다. 태양광 발전은 비선형 전압전류 특성을 가지고 있기 때문에 발전효율을 최대한 높이기 위해 최대전력추종제어(MPPT)를 하게된다. 또한 부하가 여러 개일 경우에는 다양한 출력이 요구되는데, 이를 위해 강압 및 승압이 가능한 컨버터가 필요하게 된다. 그러나 다중부하에는 다수의 컨버터와 각각의 컨버터를 제어하기 위한 제어기가 필요하게 되므로 cost가 증가요인이 된다. 따라서 본 논문에서는 승 강압에 의한 다중출력을 갖는 병렬구조의 DC-DC컨버터를 제안하고자 한다. 제안된 컨버터는 입력전압을 승 강압하여 두 개의 출력전압을 갖는다. 강압동작은 일반적인 buck형 컨버터에 커패시터를 추가하여 구성하였고, 승압을 위해서는 리플율이 적은 Coupling inductor를 이용하고 커패시터를 추가하여 두 개의 컨버터를 병렬로 구성하였다. 컨버터의 병렬제어를 위해 제어기를 설계하고 이를 시뮬레이션 하였다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1280-1287
• /
• 2019

Grid-connected bidirectional PCS(Power Conditioning System) technology is a technology for implementing distributed renewable energy smart grid. And it is always charged by using power collected from solar modules and commercial grid power among vast smart grid systems, and stored when needed.It is a hybrid energy storage device that allows power to be released into the low voltage system. To this end, a PV input power converter with MPPT function, a bidirectional power converter for battery charging and discharging, and a DC Link input are output to a 3 phase 380V AC system, and if nessary, the bidirectional DC/DC converter We designed and developed a PCS with three power converter structures composed of inverters that perform battery charging. Currently, this system is applied to the site of Jeju, which is vulnerable to power outages and fire accidents.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.348-355
• /
• 2023

Magnesium secondary batteries are attracting much attention due to their potential to replace conventionally used lithium ion batteries. Magnesium secondary battery cathode material Mo₆S₈ were synthesized by molten salt synthesis method and PVC as a carbon materials were added to improve electrochemical properties. Crystal structure, size and surface of the synthesized anode materials were measured through XRD and SEM. Charge-discharge profiles and rate capabilities were measured by battery test system. 2.81 wt% PVC coated sample showed the best rate capabilities of 85.8 mAh/g at 0.125 C-rate, 69.2 mAh/g at 0.5 C-rate, and 60.5 mAh/g at 1 C-rate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.56-69
• /
• 2021

In this paper, the PV system with a link to the commercial system needs some advantages like small capacity, high power factor, high reliability, low harmonic output, maximum power operation of solar cell, and low cost, etc. as well as the properties of inverter. To transfer the PV energy of photovoltaic power generation system to the system and load, it requires PCS in both directions. The purpose of this paper is to confirm the stable power supply through the load leveling by presenting the PCS considering ESS of photovoltaic power generation. In order to achieve these purpose, 5 step process of operation mode algorithm were used according to the solar insolation amount and load capacity and the controller for charging/ discharging control was designed. For bidirectional and effective energy transfer, the bidirectional converter and battery at DC-link stage were connected and the DC-link voltage and inverter output voltage through the interactive inverter were controlled. In order to prove the validity of the suggested system, the simulation using PSIM was performed and were reviewed for its validity and stability. The 3[kW] PCS was manufactured and its test was conducted in order to check this situation. In addition, the system characteristics suggested through the test results was verified and the PCS system presented in this study was excellent and stronger than that of before system.