• Progress in Medical Physics
• /
• v.5 no.1
• /
• pp.55-66
• /
• 1994

After proving home-made imaging pulse sequences including tailored RF pulse by phantom, susceptibility-contrast-enhanced MR venograms of cat brain were obtained using tailored RF gradient-echo(TRGE) method. Sagittal MR imaging of the cat brain obtained by TRGE technique shows several veins, for example, dorsal sagittal sinus, straight sinus, vein of corpus callosum and internal cerebral vein, etc., compared with cats anatomical figure. Tailored RF waveform was generated by PASCAL language in ASPECT 3000 computer(Switzland, Bruker). Rectangular-shaped slice profile with bi-linear ramp function as phase distribution in the slice, at which maximum value was 2$\pi$, was fourier transformed to make tailored RF pulse. Experimental MR imaging parameters were TR/TE=205/10 msec, slice thickness TH=7mm, maxtrix size=256$\times$256, in-plane resolution=0.62$\times$0.31mm$^2$, and field of view(FOV)=8cm for both conventional gradient-echo(GE) imaging and TRGE imaging techniques.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.447-454
• /
• 2003

Samples were prepared by the solid-state reaction method. The nominal composition of the samples was B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$ prepared from powder of B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, and CuO. They were pulverized, mixed with AgO, A $u_2$ $O_3$and MgO of 50 wt%. Finally, they were sintered at 820 to 85$0^{\circ}C$ in air. The structural characteristics, the microstructure of surface and the critical temperature with respect to the each samples were analyzed by XRD, $T_{c}$, SEM and EDS respectively. It was found that the the critical temperature of the silver oxide additive samples (99.58 K) is higher than those of gold or magnesium oxides additive samples, but all those values are lower than that of pure Bi-2223 phase. The microstructure of surface showed the tendency which the AgO additive samples become more minuteness than A $u_2$ $O_3$ and MgO additive samples.s.samples.s.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.292-297
• /
• 2015

A new cultivar of Hibiscus 'Red Bohanjae' (Hibiscus syriacus 'Red Bohanjae') was developed after crossing between Hibiscus syriacus 'Andong' (♀) with white flowers and Hibiscus syriacus 'Samchully' (♂) with pink flowers to improve flower quality and growth habit. The Hibiscus breeding program was initiated in 2002, and H. syriacus 'Red Bohanjae' was preliminarily selected as '02-RV-17' in 2003 due to its stable flower quality with rich pink flowers and small tree type. The selected line was further evaluated for growth characteristics, leaf shape, leaf size, flowering characteristics, and tested for distinctness, homogeneity, and stability during 2004-2007. The characteristics preserved by grafting. 'Red Bohanjae' showed a small growth habit with slightly upright branches. The tree had potential use as a potted plant or bonsai because of its dwarf form. The new cultivar 'Red Bohanjae' had violet-pink color flowers (RHS N78C) with red eye spots, small size (9.2 cm) and spatulate (I-type) petals. Leaves were 4.2 cm long and 2.3 cm wide. After the evaluation of plant characteristics for 3 years (2005-2007), it was registered as cultivar 'Red Bohanjae' (4118, plant variety protection rights number) in 2012. 'Red Bohanjae' having violet-pink flowers with red eye and dwarf tree form seems to be suitable for pot or bonsai cultivation in both indoor and outdoor conditions.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.177-192
• /
• 2011

Hollow fiber membrane using CTA polymers were prepared by the phase separation method for the separation and purification of biogas and the hollow fiber gas separation membrane modules with the effective surface area of 0.17 $m^2$ were prepared. The pure gas permeation properties of membrane modules for methane, oxygen and carbon dioxide were measured. The permeance of $CO_2$ and $CH_4$were 0.46 GPU and 18.52 GPU, respectively, therefore, the high $CO_2$/$CH_4$ selectivity of 40.4 was obtained. The separation and purification test for 4 different simulated mixed gases were carried out after the pure gas test and the gas concentration and flux of the permeate at the various stage-cut were measured from the 1 stage, 2 stage, and 3 stage cascade of membrane modules. In the 1 stage test, the concentration of $CH_4$ increased as the increase of the stage-cut, while the $CH_4$ recovery efficiency ratio decreased. In the 2 stage test, the $CH_4$ recovery efficiency ratio increased compared to the 1 stage. The 3 stage test was employed to reduce the loss of $CH_4$ in biogas and the result showed less than 5% of $CH_4$ recovery loss.

• Tunnel and Underground Space
• /
• v.18 no.1
• /
• pp.20-32
• /
• 2008

The study shows a method called a square-inventory method, which is a better and faster method than scanline survey and window method for an analysis of slope stability. The study area is located in the Changri area, Boeun-Gun, Chungbuk, and consists of many formations of the Okcheon Supergroup. Various types of failure are observed from the phyllite including the rocks in the study area. The physical properties of meta-sedimentary rocks are that minerals of the rocks are composed of microcrystalline quartz and sericite, which are arranged parallel to bedding (or schistosity) and crenulation cleavage. Therefore, such properties affect geotechnical ones of the rock. The slope stability are analyzed by selecting 3 areas, each of which are divided into 2 or 3 slopes of $1m{\times}1m$ area that represent each of 3 investigation sites. The possibility of wedge and toppling failure is very high in all 3 areas by using square-inventory method. Although possibility of plane failure is weak in the investigation site 2, the plane failures are frequently found from the slope of site 2. The bedding (or schistosity) plane and cleavage, another types of discontinuity coexist in meta-sedimentary rocks uulike igneous rocks, and therefore are important factors to be considered together with joint structures in th ε analysis of slope stability.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.289-302
• /
• 2020

To determine the shallow subsurface structure and sliding surface of land creeping in 2016 at Hadong-gun, Gyeongsangnam-do, geophysical surveys (electric resistivity, and refraction seismic methods, borehole televiewer) and slope stability analysis were conducted. The subsurface structure delineated with borehole lithologies and seismic velocity structures provided the information that the sediment layer on the top of the slope was rather as thick as 20 m and the underlying weathered rock (anorthosite) was thinner than 1 m. Based on the tension cracks observed during the geological mapping, televiewer scanning was performed at the borehole BH-2 and detected the intensive fracture zones at the ground-water level, associated with the slip weak zones mapped in dipole-dipole electrical resistivity section. Downslope sliding and slightly upward pushing at the apex of high resistive bedrock explains the curved slip plane of the land creeping. Such a convex structure might play a role of natural toe abutment for preventing the downward development of slip weak zones. In slope stability analysis, the safety factors of the slip weak zone are calculated with varying the groundwater levels for dry and rainy seasons and the downslope is founded to be unstable with safety factor of 0.89 due to fully saturated material in rainy season.

• Clinical and Experimental Pediatrics
• /
• v.48 no.6
• /
• pp.634-639
• /
• 2005

Purpose : An understanding of the immunological process is required if primary prevention of atopic diseases is to be developed in early childhood. But, it is too hard to distinguish atopy from nonatopy under the age of two clinically, because the expression of phenotype and cytokines is vague in early childhood. We evaluated DNA methylation changes at Th2 interleukin-4 gene in peripheral blood from atopic children. Methods : We selected 15 allergic children(mild : eight, moderate to severe : seven) and seven normal controls by using family allergy scores and clinical histories. We measured Total IgE and Der f II specific IgE levels and cultured peripheral blood mononuclear cells with Der f II stimulation and extracted DNA from Der f II specific T cells. We examined the change of CpG methylation in DNA from atopic and nonatopic children. Results : In T cells from normal children, IL-4 DNA were predominantly methylated; otherwise, CpG demethylation occurred in Der f II specific T cells from allergic children. Conclusion : IL-4 DNA methylation changes occurred in T genes from allergic children and DNA methylation assay in early childhood.

• Microbiology and Biotechnology Letters
• /
• v.31 no.4
• /
• pp.322-328
• /
• 2003

The Transformation-Associated Recombination (TAR) cloning technique allows selective isolation of chromosomal regions and genes from complex genomes. The procedure requires knowledge of relatively small genomic sequences that reside adjacent to the chromosomal region of interest. This technique involves homologous recombination during yeast spheroplast transformation between genomic DNA and a TAR vector that has 5'and 3' gene targeting sequences. In this study, we examined the minimum size of specific hooks required for a single-copy gene isolation and compared the utility of different TAR vectors, radial and unique vectors, by cloning the same single-copy gene. The efficiency of TAR cloning of the hHPRT gene was same using hooks varying from 750 to 63 bp. The number of transformants decreased approximately 20-fold when the TAR vector contained two unique hooks versus using a radial vector, but the percentage of positive recombinants increased over 2-fold when a unique TAR vector was used. Therefore, we suggest that the two-unique TAR vector is suitable for general TAR cloning given its high selectivity, and the radial TAR vector is more suitable when genomic DNA is in limited quantity, for example, DNA isolated from pathological specimens. Moreover, we confirm the minimal length of a unique sequence in a TAR vector is approximately 60 bp for a single-copy gene isolation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.103-110
• /
• 2018

Infrared signatures emitted from naval ships are mainly classified into internal signatures generated by the internal combustion engine of the ship and external signatures generated from the surface of the ship heated by solar heat. The internal signatures are also affected by the chemical components ($CO_2$, $H_2O$, CO and soot) of the exhaust plumes generated by the gas turbine and diesel engine, which constitute the main propulsion system. Therefore, in this study, the chemical composition ratios of the exhaust plumes generated by the gas turbines and diesel engines installed in domestic naval ships were examined to identify the chemical components and their levels. The influence of the chemical components of the exhaust plumes and their ratios on the infrared signatures of a naval ship was investigated using orthogonal arrays. The infrared signature intensity of the exhaust plumes calculated using infrared signature analysis software was converted to the signal-to-noise ratio to facilitate the analysis. The signature analysis showed that $CO_2$, soot and $H_2O$ are the major components influencing the mid-wave infrared signatures of both the gas turbine and diesel engine. In addition, it was confirmed that $H_2O$ and $CO_2$ are the major components influencing the long-wave infrared signatures.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.344-349
• /
• 1995

The crystal and molecular structure of the title compound has been determined from 2568 reflections collected on an automatic CAD4 diffractometer using graphite-monochromated $Mo-K\alpha$ radiation. The crystal is monoclinic system, space group $P2_1$ with unit cell dimensions $a=8.756(8)\AA$, $b=25.757(2)\AA$, $c=8.628(1)\AA$, $\beta=99.15(4)^{\circ}$, V= 1,921(2) ${\AA}^3$, Z=4, $D_C=1.336\;g/cm^3$, ${\mu}=1.54\;cm^{-1}\;and\;T=298^{\circ}K$. The final R factor was 0.051 for 2049 reflections over $3{\sigma}(Fο).$ The crystal has two asymmetric molecules in the unit cell. The arrangement of sulfon group was shown a distorted tetrahedron structure and N(6), N(6') atoms were deviated from the least-squares planes of the thiadiazine rings, respectively. The molecular packings in the unit cell are linked by the two intermolecular hydrogen bonds of N-H---O type and van der Waals forces.