• Resources Recycling
• /
• v.11 no.5
• /
• pp.24-29
• /
• 2002

In this study, to improve the color of iron oxide from waste pickling acid at the cold rolling mill, the quality control technologies especially about color were investigated on the spray roaster and iron oxide powder. At the operation condition of the spray roaster, the charge amount of waste acid per hour, temperature, numbers of spray nozzle were investigated. At admixing process, titanium oxide, silica, goethite were tested. Color character of iron oxide can be improved by process control at spray roaster and by admixing process at a pigment factory Iron oxide from results of this study is enough to use as the colorant of concrete product.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.19-25
• /
• 2003

This experiment was carried out to examine the effect of iron oxide roasting for Sr-ferrite magnet. Chloride content was decreased with raising the 2 nd roasting temperature of iron oxide for ruthner process iron oxide. The optimization temperature for roasting of ruthner process iron oxide was around $800^{\circ}C$ as average particle size 1.5∼1.9 $\mu\textrm{m}$, apparent bulk density 1.4 g/$m\ell$ and chloride content 0.05%. The relation between Br and HcJ by sintering temperature for Sr-ferrite magnet was found to be Br≒-0.258HcJ＋494. In case of having a vibrating disk mill for the ruthner process iron oxide, the magnetic properties were Br 421 mT and HcJ 251 kA/m.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.714-718
• /
• 1997

The tendency of rancidity in roasted and/or reheated yellowfin sole and yellow croaker was investigated as typical white muscled fish. In fatty acid composition of the total lipid, saturated fatty acid was $27.4\%,\;33.4\%$; monoenoic acid, $36.5\%,\;38.7\%$ and polyenoic acid, $34.5\%,\;26.5\%$ in yellowfin sole and yellow croaker, respectively. The ratio of unsaturated fatty acid (UFA)/saturated fatty acid (SFA) were 2,6, 2.0 and content of total lipid was $1.4\%,\;0.8\%$, respectively. Peroxide content decreased after heating in yellowfin sole while decreased after heating and tended to increase after reheating in yellow croaker. Thiobarbituric acid value increased during roasting and heating in all the samples but decreased after reheating. Acid value increased after roasting, heating and reheating in all samples, particularly higher in yellowfin sole which have a high content of UFA. Conjugated dienes continuously increased during the repeats of heating, showing more increase in the fillet with Skin than the skinless.

• Resources Recycling
• /
• v.8 no.4
• /
• pp.45-56
• /
• 1999

The purpose of tlus sludy was to preparc raw material powder for Mn-Zn iclrile, h m mined mill scale and fero-Mn, usins a co-spray roasting process The mill scale and ferra-Mn uscd in this raalins process was rcf~nedb y mesn-ns of a slxc~apl rxcss ~nvolvinm~a te~ialsc ontalning imp~u-ltleso r less than 100 pprn In this study an effeclive spray roaster system. wllich produces fme complex oxide powder, collects produccd ~owder.,m d prcvel~tse ~~llssiooifi HCI gas. was also manufactured. By means of spray~ngp urifcd raw malerial solu~lionl nln a manufacued high tcmpervture rumace. &-ferrite powder and a comnpleu o ~ d e powder of Fe,O; and M,x203 were manufactured. The chmcterlstics of the composllion. surface urca, and p'miicle size dismbulion or the produced powder were exmined. ptoduced powdcr was then ~ m e dwi tli ZnO powder. aid olher addilives of defined cornposnion, and Mn-Zn femite cares werc praiuccil by meuns of Sorlning and closely controlled sintering processes. The magpelic p~oprlieso f c olo~ss, initlal permeability. mauin~u~mnn agnehc flux. coz~civcr orcc and residual magnccic flux for the above cores we,= measured, and fmm Il~ase I-csulls the eflicacy of lhe co-spray roasling pncess to pl.ellare raw material powder lor Mn-Zn ferntc was established

• Resources Recycling
• /
• v.18 no.5
• /
• pp.19-25
• /
• 2009

Molybdenite concentrate ($MoS_2$) is the major mineral for the molybdenum industry, of which the industrial processing is first converted to technical grade molybdenum trioxide ($MoO_3$) by its oxidative roasting and purification, used as a raw material for manufacturing several molybdenum compounds. In the present work, detailed experimental results for the oxidative roasting of low grade Mongolian molybdenite concentrate are presented. The experiments were carried out in the temperature range of 793 to 823 K under an oxygen partial pressure range of 0.08 atm to 0.21 atm by using a thermogravimetric analysis technique. The molybdenite concentrate was an average particle size of $67\;{\mu}m$. In the oxidative roasting of low grade Mongolian molybdenite concentrate, more than 95% of molybdenite was converted to molybdenum trioxide in 60 min. at 828 K. The lander equation was found to be useful in describing the rates of the oxidative roasting and the reaction order with respect to oxygen concentration in a gaseous mixture with nitrogen was 0.11 order.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.10-16
• /
• 1997

To confirm the possibility of seaweed extracts for functional food, water or ethyl alcohol solubles were extracted from laver, Porphyra yezoensis and evaluated those food components such as proteins, carbohydrates, nucleic acids, taurine, pigments and browning extent. The amount of proteins, polysaccharides and nucleic acids extracted decreased with increasing ethyl alcohol concentration, which was maximal when water was used as extraction solvent. The extractability of proteins, polysaccharides and nucleic acids was different between the dried and the roasted laver. Taurine was extracted about 1% from the dried and the roasted laver in the range of o~7o% ethyl alcohol concentration. The amount of carotenoids extracted by 95% ethyl alcohol from the dried and the roasted laver were 146.6 and 138.4mg%, respectively, which was 66 ~ 80% of yield extracted by methanol/acetone(1/1) solvent. The browning value of 50 ~6o% ethyl alcohol extraction group from roasted laver was highest among water/ethyl alcohol extraction group. The extraction yield was maximum when laver was extracted with water, and the value was 26.3% for the dried laver and 27.5% for the roasted layer. Organoleptic characteristics from four kinds of extraction groups containing hot water extraction showed that extracts from the roasted laver were evaluated most eminent and thought to be applicable to various preparation of food.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.19-25
• /
• 1995

A Study on the recovery of the valuable metals(Vanadium Molybdenium) was carried out using spent catalysts originated from desulfurizing process of oil refinery. Experiments consisted of pre-roasting for Sulfur and Carbon removal, soda roasting and leaching for the extraction of valuable metals, and selective precipitation of Vanadium and Molybdenium. Effects of temperature and time in roasting for Sulfur removal, of $Na_2CO_3$ concentrations in soda roasting, and of pulp density, temperature and time in leaching were investigated for the recovery of Vanadium and Molybdenium. A optimum condition having over 85% in yield of Vanadium and Molybdenium was found. In the selective precipitation, more than 98% of Vanadium and Molybdenium were obtained by the variation of pH and concentration of additives.

• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.206-209
• /
• 1973

In this paper, the degradation of nucleotides and their related compounds in hag-fish muscle during roasting was studied. The results showed that IMP was dominant in fresh hag-fish showing 63% of total nucleotides while the contents of ATP, ADP, AMP, inosine and hypoxanthine were low. The ATP tended to degrade rapidly during roasting, but 80% of IMP remained and ATP, ADP and AMP were also entirely disappeared. In consideration of flavor quality, it was consumed that roasting is an effective preparation method of hag-fish, as far as IMP is concerned.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.57-63
• /
• 2016

This study were carried out sulfation roasting and selective leaching test for the effective recovery of copper component in concentrate obtained by froth floatation of Autrallian low grade copper ore. The optimum conditions of sulfation roasting were temp. $450^{\circ}C$, $Na_2SO_4$ 2 mole ratio and time 1.5 h, and then selective leaching were room temperature and $H_2O$ or 1M $H_2SO_4$ solutions. Leaching efficiency of optimum sulfation product were 90 wt.% of copper, 20 wt.% of iron and 15wt.% of nickel elements. In this results, it was possible to selective decomposition leaching of the copper component under optimum conditions in this research.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.33-39
• /
• 2022

In this study, analytical thermochemical modeling factors that contribute to maintaining a specific temperature range during vanadium roasting as a pretreatment using a rotary kiln are investigated. The model-related mechanisms include thermochemical reaction rates, heat balance, and heat transfer, through which the resultant temperature can be estimated intuitively. Ultimately, by optimizing these parameters, the ideal roasting temperature in the kiln is ≈1000 ℃ (or ≈1273 K) for long-term operation. Therefore, the heat generated from hydrocarbon (natural gas) fuel combustion and ore oxidation reactions, as well as the radiant heat transferred to ores, are assessed. In addition, thermochemical methods for relieving the temperature gradient in order to maintain the optimum temperature range of the rotary kiln are suggested.