• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2001

In this study, reduced-scale experiments were conducted to understand smoke movements in tunnel fires with the natural ventilation. The 1/20 scale experiments were conducted under the Froude scaling since the smoke movement in tunnels is governed by buoyancy force. Three cases of experiments, in which a natural vent location varied from 1 m, 2 m and 3 m from the fire source symmetrically, were conducted in order to evaluate the effect of the position of ventilation systems on smoke movement. In case of a poo1 whose diameter is 4.36 cm, the temperature of smoke layer passed through the vent was maintained 7~$8^{\circ}c$ less than that of smoke layer without a vent. In case of a pool whose diameter is 5.23 cm, the average velocity passed through the vent was decreased when it was close to the fire source. And the maximum delay time was 3.86s. In CASE 1, the ceiling temperature was decreased by approximately 8$^{\circ}C$ and the vertical temperature was decreased by approximately $7^{\circ}c$. In CASE 2, both ceiling and vertical temperature wert decreased by $3^{\circ}c$ and in CASE 3, they were decreased by $2^{\circ}c$ each. It was confirmed that the thickness of smoke layer was maintained uniformly under the 25% height of tunnel through the visualized smoke flow by a laser sheet and the digital camcoder.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.152-158
• /
• 2016

Nitrogen oxide is generated by the chemical reaction of oxygen and nitrogen in higher temperature environment of combustion facilities. The NOx reduction equipment is generally used in the power plant or incineration plant and it causes enormous cost for the construction and maintenance. The flue gas recirculation method is commonly adopted for the reduction of NOx formation in the combustion facilities. In the present study, the computational fluid dynamic analysis was accomplished to elucidated the cold flow characteristics in the flue gas recirculation burner with coanda nozzles in the flue gas recirculation pipe. The inlet and outlet of flue gas recirculation pipes are directed toward the tangential direction of circular burner not toward the center of burner. The swirling flow is formed in the burner and it causes the reverse flow in the burner. The ratio of flue gas recirculation flow rate with the air flow rate was about 2.5 for the case with the coanda nozzle gap, 0.5mm and it was 1.5 for the case with the gap, 1.0mm. With the same coanda nozzle gap, the flue gas recirculation flow rate ratio had a little increase when the air flow rate changes from 1.1 to 2.2 times of ideal air flow rate.

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.184-188
• /
• 2013

Two types of polymer-based optical splitters with $200{\mu}m$ large core are presented for optical multimode networks, such as smart home networks, intelligent automotive networks, etc. Optical splitters that have 1:1 symmetric and 9:1 asymmetric structure were fabricated by a ultra violet(UV)-imprint technology using a deep etched Si(silicon) master by the Bosch process. In this paper, we successfully fabricated the symmetric and asymmetric optical splitters with suitable optical network applications.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1252-1258
• /
• 2022

The exhaust gas from the marine engines include a quantity of water vapor and particulate matter. The total particulate matter includes filterable particulate matter (FPM) and condensable particulate matter (CPM) that condense after releasing into the atmosphere. The portion of CPM is higher than that of FPM that is removable through the filter before discharging. An experimental setup for waste heat and water recovery and removal of CPM in the exhaust gas was tested using an industrial gas boiler in the laboratory. The water and CPM in the exhaust gas were removed through the first stage of cooling method and further removed through the second stage of absorption method. The efficiencies of water recovery were 73% after the first stage of cooling method and 90% after the second stage of absorption method. At the same time, the CPM was removed by 80-90% through the processes. The waste heat recovered could be used to process heat, and the water recovered could be used to process water in the ship. Furthermore, the CPM, which is a major source of the particulate matter but not subject to administrative regulation, could be removed effectively.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.187-218
• /
• 2020

Ulsan Dutbeki is a local dance handed down by the Ulsan people through custom. This study was discussed on the locality of Ulsan Dutbeki. The method of this study is as follows. First of all, the perception of Dutbeki from the perspective of Ulsan's local characteristic. First, Ulsan Dutbeki is based on the local characteristic of the southeastern coastal area of the Korean peninsula. Second, Dutbeki features local characteristics of Ulsan as a military cultural area. Third, in Dutbeki, there is a local culture of Ulsan which was originated from the village Dongjeol and outdoor performances. Next, the researcher perceived Ulsan Dutbeki which had been handed down through custom and approached its shape. The origins of the shape are, firstly, the speech tone and gestures of Ulsan people. Secondly, folk plays related to worshiping martial arts and military training. Thirdly, the characteristics of the Dutbeki dance in coastal areas of Gyeongsangdo. Fourth, local custom displayed at the village festival of Ulsan. Ulsan is a region of Gyeongsang culture area and has similarity with other localities. However, this study limited its comparisons with regard to Dutbeki that were originated from the local characteristics of other regions. The results of this study recognized Ulsan Dutbeki as a local dance in Ulsan area. In other words, this study perceived Dutbeki, which had been an entertaining component of traditional lifestyle, as an intangible cultural heritage and studied the form in every conceivable way from an artistic point of view.

• 보일러설비
• /
• s.62
• /
• pp.103-105
• /
• 1999

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.869-874
• /
• 2009

We aimed to develop a new salting method to improve the quality of Dombaegi. The changes in quality characteristics of Dombaegi during salting using different salting methods (dry and brine salting) and salting pressures (vacuum and atmospheric pressure) were investigated. Moisture content was highest in Dombaegi prepared by brine salting under atmospheric pressure. Salt content was greater when salting was conducted under vacuum compared with atmospheric pressure. Water-holding capacity and water activity were higher under vacuum pressure than at atmospheric pressure and after dry salting compared with brine salting. Color change varied greatly when Dombaegi samples salted at atmospheric pressure and under vacuum were compared, and was affected more by dry salting than brine salting. Springiness was higher after salting under vacuum, and in dry conditions. The results showed that dry salting under vacuum provided better quality characteristics compared with other methods. Therefore, salting under vacuum was the optimal salting process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.94-94
• /
• 2011

본 논문은 "차세대 반도체용 진공공정의 실시간 측정/진단/제어 기술개발"과제의 제 3 세부과제 "스마트형 진공 배기 진단 제어 시스템 개발"의 주요 연구 실적을 소개한다. 본 세부과제는 (1)진공펌프 및 배기 시스템의 다중 상태변수 측정 장치 개발, (2)공정별 펌프 상태 및 공정 조건 data base 구축 및 진단 알고리즘 개발(e-Diagnostics Level 2 FDC 수준), (3)공정별 펌프 상태 변수 측정을 통한 자기 진단 기술 개발(e-Diagnostics Level 2 FDC 수준), 그리고 (4)측정/통신 PMS (Pump Monitoring System) 개발(통신속도 56k bps 이상, e-Diagnostics Level 0~1)을 최종 목표로 추진되어 왔다. 첫 번째 주요실적은 진공배기시스템의 다중 상태변수 측정 및 평가 장치를 성공적으로 개발하였다. 본 장치는 현장에서 진공펌프의 배기속도를 3% 이내로 정밀하게 측정할 수 있는 소닉 노즐을 이용한 배기속도 측정 장치 및 기술을 성공적으로 개발 완료하였다. 그리고 측정 가능한 상태변수는 20종에 달하며 이들을 이용하여 진공펌프의 성능인자 15종과 특성치 9종을 종합적으로 평가할 수 있는 능력을 갖추었다. 두 번째 주요실적은 공정별 진공배기시스템의 자기진단 및 예지보수 기수 개발이다. 연구에서 개발된 적응형 인자모델을 이용한 상태진단 기술은 이미 학회 논문으로 소개되었으며 본 기법은 기존의 시계열 상태변수를 이용한 기존의 상태진단 기법보다 메모리 소요량을 100배로 줄였으며 그리고 연산양은 10% 이하로 줄인 획기적인 기법이라 할 수 있다. 세 번째 주요실적은 상태변수 측정, 통신, 제어 및 공정적응 기능 통합형(smart) PMS(pumper monitoring system) 개발이다. 본 장치는 CAN통신 기법을 새로이 채택하였으며 한 대의 PC로 64대의 단위 진공펌프들의 운전 상태변수를 실시간으로 수집할 수 있도록 하였다. 그리고 운전 중인 개별 진공펌프들의 운전 상태진단은 적응형 인자모델을 이용한 상태진단 기술을 응적용함으로써 매우 정확한 상태진단을 매 batch마다 수행할 수 있는 기능을 제공한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.169-169
• /
• 2011

진공펌프의 성능을 나타내는 여러 파라미터가 있지만 가장 중요한 성능지표는 역시 배기속도라고 할 수 있다. 배기속도는 물리적으로 체적유량(volume flow rate, L/s 또는 m3/hr) 즉 단위시간당 펌프 흡기구에 들어오는 기체의 체적을 가리킨다. 펌프 흡기구 단면을 지나가는 체적을 직접 측정하는 것은 거의 불가능하므로 진공 전문가들은 흡기구로 들어가는 기체 유량(flow rate, mbar${\cdot}$L/s 또는 Pa${\cdot}$m3/s)과 흡기구 압력(mbar 또는 Pa)을 측정한 후 유량을 압력으로 나누어 주는 방식으로 배기속도를 측정한다. 유량은 표면 기체 방출을 고려하더라도 실용적인 측면에서 보면 위치에 상관없이 불변하는 값으로 볼 수 있어서 유량을 어떻게 정밀하게 잴 것인가 하는 방법만 있으면 편리한 위치에서 측정하면 된다. 반면에 압력을 정밀하게 측정하는 방식은 확립되어 있지만 막상 어디서 측정하는 것이 옳은가 하는 것은 의외로 쉽지 않다. 펌프의 배기속도를 측정하는 상황을 몇 가지로 가정해 보면, 규격에 입각한 표준용기에 달아 정식으로 재는 것, 게이지가 부착된 마구리판을 달고 간이로 재는 것, 펌프가 사용되고 있는 시스템 현장에서 재는 것이 있을 수 있고 펌프가 달려 있는 상태도 직접 용기에 달거나, 도관 또는 어댑터 및 밸브를 통해 달리는 경우가 있다. 앞에서 펌프 배기속도 계산 시 사용하는 흡기구 압력이란 엄밀히 말하면 흡기구를 바라보는 방향으로 가해지는 압력을 말하는데 이는 진공 게이지를 펌프 흡기구 면에서 상류를 향하도록 놓을 때 얻을 수 있는 값으로 막상 실행하는 것은 어렵다. 표준용기의 구조는 진공 게이지를 특정 위치에 달 때 마치 흡기구 면에 놓인 게이지처럼 흡기구 압력을 정확하게 측정할 수 있도록 고안된 것이지만 때에 따라서는 여러 변형된 측정 방식을 사용할 수밖에 없는 상황이 만들어지므로 어떤 보정을 거치면 올바른 배기속도 값을 구할 수 있는지 살펴볼 필요가 있다.

• 프린팅코리아
• /
• s.3
• /
• pp.48-51
• /
• 2002

"문화가 발전하기 위해서는 기초가 튼튼해져야 합니다. 특히 양적 팽창보다는 질적 향상이 중요하다고 봅니다. 따라서 저는 임기동안 문화의 기초 체력을 다지는데 최선을 다할 생각입니다." 지난 7월 국회문화관광위원회 위원장으로 선임된 배기선의원(민주당)은 21세기의 국가경쟁력은 '문화'에 있는 만큼 지식산업의 근간인 출판인쇄 산업발전을 위해 모든 노력을 다 하겠다고 밝혔다. 8월13일 배기선위원장을 만나 국회차원의 대책과 앞으로의 활동 방향에 대해 들어 보았다.