• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.88-95
• /
• 2009

This study is for understanding the domestic possibilities of the high temperature incineration of waste containing Polychlorinated Biphenyls (PCBs) with the analysis of normal operation case and waste gas, fly ash, dioxin about bottom ash, Total-PCBs, Co-PCBs, and the for analysis the heavy metal leaching feature included by bottom ash and fly ash, heavy metal leaching experiment was implemented. The result shows the dioxin density of the waste gas from waste containing PCBs was $0.00699{\sim}0.00763ng-TEQ/Nm^3$, which is lower than $0.0192ng-TEQ/Nm^3$ from the normal operation case. And each Co-PCBs and total PCBs shows $0.00043{\sim}0.00112ng-TEQ/Nm^3$ and $3.06{\sim}3.87ng/m^3$ respectively. The bottom ash test result shows Dioxin 0.00225~0.00630ng-TEQ/g, Co-PCBs 0.00027~0.00082ng-TEQ/g, Total PCBs 0.9~2.6ng/g, and the fly ash shows Dioxin 0.00164~0.00344ng-TEQ/g, Co-PCBs 0.00053~0.00054ng-EQ/g, Total PCBs 0.64~0.84ng/g. The bottom ash and fly ash experiments for heavy metal leaching did not show any leaching but when it comes to the ingredients of the fly ash, Pb elements shows 31.01~237.7ppm, higher than leaching criterion. The analysis of the density of all air pollution material from the waste gas shows the lower value than permissible criterion.

• Journal of Preventive Medicine and Public Health
• /
• v.18 no.1
• /
• pp.129-136
• /
• 1985

This paper is carried out to determine the venous blood gas components and heavy metals, such as lead, cadmium and copper, in blood between urban and rural teenager. The subjects were 34 in urban, Taegu city and 37 in rural, Euisung-Gun. But smokers were excluded. The specimens were sampled in May, 1985. The heavy metals were analyzed by atomic absorption spectrophotometry (IL. 551) and carboxy-Hb, Met-Hb, Hb, $O_2\;and\;CO_2$, blood gas analyzer (IL. 1301) and CO-oximeter (IL. 282). In urban group, $PO_2\;and\;O_2-Hb$ were significantly lower than in rural (p<0.01, p<0.03, respectively), and ${HCO_3}^{-}\;and\;TCO_2$ were significantly higher than in rural (p<0.01, p<0.01, respectively). CO-Hb concentration was rather higher in the rural group than the urban (p<0.03), other Met-Hb was higher in urban group than in the rural (p<0.01). Lead and cadmium were also significantly higher in the urban group (p<0.03, p<0.02, respectively).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.991-998
• /
• 2013

The fuel injection pipe of a common rail system used in a clean diesel vehicle plays a role in supplying fuel from a rail to the injector of each cylinder connecting the engine under a repeated internal pressure. The fuel injection pressure is increased to over 200 MPa for satisfying EU emission standards and improving fuel efficiency, and a heading process and an autofrettage process are required for preventing folding defects and improving fatigue life. In this study, the flow stress and SN data of the material of the pipe are obtained through a tensile test and a fatigue test. The heading process for checking the folding defects of pipe ends is performed by using FEA. Furthermore, the optimal design of the autofrettage process for improving fatigue life considering not only the compressive residual stresses of the inner surface but also the tensile residual stresses of the outer surfaces of the pipe under the repeated internal pressure is performed by using FEA. To verify the process design, fatigue analysis for the autofrettaged pipe is performed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2001

Now our ocean environment pollution is very serious. Its harm hinders in marine breeding and the safe navigation of ships at the coast. We have used an assembly system for a measure taken against environment pollution like this. But, here are some problems awaiting solution. First, most of combustible materials among ocean waste are high polymer, so it is necessary some special equipment to incinerate them. In the process we can't overlook air pollution by exhaust gas. Also, when we reclaim these wastes, we remember that they can't be decomposed naturally and leaking water may pollute soil. Thus now a days new treatment method has been developed, it recycles and doesn't product secondary pollution materials by recovering oil from pyrolysis. For it, this study investigated chemicalㆍphysical properties of wastes. And it found condition of recovering the most oil. Also it probed that the variation of temperature raising speed affects the weight reduction characteristics of wastes. Also, while studying recovered oil by waste pyrolysis and the rate of non-condensing gas in accordance with the variation of temperature raising speed. Finally we had confidence the development of pyrolysis oil recovery would succeed because we carried out evaluation at an economic point of view about it.

• 전기의세계
• /
• v.41 no.12
• /
• pp.21-30
• /
• 1992

내연기관의 가솔린자동차보다 역사가 오래된 전기자동차는 상대적으로 주생성능과 가격 경쟁력의 열세로 그 자취를 감추었고 최근까지 주로 특수목적의 단거리 저속차량으로 사용되고 있다. 그러나 1890년대 후반부터 전세계가 자동차배기가스에 의한 대기오염과 지구온난화 현상등의 문제를 심각하게 공감하게 되었고 마침내 미국 캘리포니아주에서는 전가자동차의 강제판매를 규정화하게 이르렀다. 이 규정에 의하면 1998년도부터 차량 판매대수의 2%를 전기자동차 판매로 강제요구하고 있다. 이 비율은 2000녀도에 5% 2003년에는 10%로 늘어날 계획이다. 따라서 미국에 많은 자동차를 수출하고 있는 일본, 독일 및 여러 유럽국가에서는 이 사업에 막대한 자금을 투자하며 개발에 몰두하고 있다. 미국의 Big3도 에너지성의 도움으로 최근 USABC를 결성하여 전기자동차 개발에 박차를 가하고 있다. 지금까지 기존의 가솔린자동차 기술에 있어서 일본과 독일에 상대적 열세에 있었던 미국도 이번 캘리포니아주의 전기자동차 강제판매 규정에 따른 전기자동차 사업으로 미국자동차 시장의 새로운 판도를 조성하겠다는 의도인듯하다. 국내에서도 정부가 이 사업의 중요성을 심각히 인식하고 G7사업과제의 하나로 선정하여 산, 학, 연 각층의 전문가가 참여하여 성공적으로 개발을 마칠 수 있도록 적극 지원하고 있다. 지금까지의 평균주행성능을 보면 최고속도 100-120km/h, 일층전 최대주행거리 150-200km 정도이며, 아직 양산체제에 돌입하지 않았기 때문에 가격면에서 경쟁력이 없는 실정이다. 그러나 1990년도에 들면서 각종 요소부품들의 기술수준이 급성장을 이루어서 앞으로 10년정도 후면 성능과 가격면에서 가솔린자동차와 대등한 수준의 전기자동차 개발이 실현될 수 있으리라 예측된다.는 영향받지 않았다. Clonidine의 심박수 감소작용은 .뇌실내및 정맥내 diltiazem이나 nifedipine 처리후에 감약되었다. 5). 뇌실내 clonidine$(30{\mu}g)$ 처 리후 뇌실내 diltiazem$(400{\mu}g)$과 nifedipine$(350{\mu}g)$의 혈압하강및 심박수 감소효과는 영향 받지 않고 그대로 나타났다. 이상의 결과로 diltiazem과 nifedipine은 가토뇌내에서 methoxamine에 의한 혈압상승의 작용점인 alrfia-1 adrenoceptor의 흥분에는 영향을 미치지 못하나 clonidine의 작용점인 alpha-2 adrenoceptor의 흥분에 의한 혈압하강및 심박수 감소효과는 억제한다고 추론하였다.thin 함량은 110.6 mg/L로서 산업적인 생산성이 있는 것으로 나타났다. 이번 연구를 통하여 개발된 변이주 B76 및 이의 대량 발효를 위한 최종조건의 정립은 향후 astaxanthin의 산업적 생산공정에 필요한 기초자료로 이용될 것으로 기대된다.색총말내에 소형의 도형, 소형의 장형 연접소포 및 DENSE CORE VESICLE의 3가지 연접소포를 가지고 있었고 출현빈도수는 촉각엽에서 가장 큰 33%이었다. 제5형 신경연접은 축색종말내에 중등도크기의 원형, 대형의 원형연접소포 및 DENSE CORE VESICLE을 포함하였고 13%의 출현빈도수로 관찰되었다. 배추횐나비의 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의 기부를 제거하여 지각신경세포를 절단하였는데 그 결과, 좌측 촉각엽에서 제4형의 신경연접이 퇴행성 변화를 나타내었다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.45-51
• /
• 2012

The calcium hydroxide$(Ca(OH)_2)$ which is the cement hydrate flowed into the tunnel by groundwater is reacted with microorganism in the soil, carbon dioxide$(CO_2)$ and the vehicle's exhaust gas$(SO_3)$. So its by-products are precipitated at the drainage pipe and these cause the drainage clogging. By this phenomenon, Degradation of water flow at the drainage system of the tunnel occurred and also pore water pressure is increased. Hence the acceleration of seepage and degradation of lining is occurred. The purpose of this study is to evaluate the field applicability of the Quantum Stick and Magnetic treatment in prevention of scale deposits at the Namsan ${\bigcirc}{\bigcirc}$ tunnel and the Zone ${\bigcirc}{\bigcirc}{\bigcirc}$ of subway. These technologies were installed into drainpipes with their performance monitored through occasional site visits. SEM and XRD were also performed on scale collected from these drainpipes. As a result, in case which factor technology is applied, scale creation is remarkably decreased and especially Quantum Stick treatment performing better than Magnetic treatment. Therefore, additional application of Quantum Stick or Magnetic treatment to the existing drainage is expected to decrease the drainage clogging of the drainage.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.862-869
• /
• 2010

Numerical analysis was done to evaluate the gas flow distribution in small scale SCR system which has $2.4{\times}2.4{\times}3.1\;m^3$ in volume and 25,300 Sm3/hr in flue gas flow capacity. Various types of baffles proposed for controlling the flow uniformity were evaluated by the CFD analysis to find the optimal geometry of the baffle in the SCR system. By installing baffles in the SCR system, the RMS (%) value was raised up to 6.2% compared with the baffle-uninstalled state. The effect of baffle thicknesses on the RMS (%) value was not shown within 0 and 8 mm in thickness, but the RMS (%) value was raised by 2.5% in 10 mm of baffles thickness, which causes the unstability in flow. By comparison between the shape of baffles, it is known that the lattice type baffle has better performance in controlling the flow uniformity than the circular truncated cone type baffle or mixer type baffle. RMS (%) values have more that 10% difference according to the shape of baffle type.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.126-130
• /
• 2012

Purpose : Methode an effective block was investigated to deal with volatile radioactive gas, short lived radioactive waste generated as a result of the routinely produced radiopharmaceuticals FDG (2-deoxy-2-[$^{18}F$]fluoro-D-glucose) and compound with $^{11}C$. Materials and Methods : All components of the radiation stack monitoring and data management system for continuous radioactive gas detection in the air extract system purchase from fixed noble gas monitor of Berthold company. TEDLAR gas sampling bags purchase from the Dongbanghitech company. TEDLAR gas sampling bags (volume: 10 L) connected via paraflex or PTFE tubing and Teflon 3 way stopcock. When installing TEDLAR gas sampling bags in Hot cell on the inside and not radioactive gas concentrations were compared. According to whether the Hot cell inside a activated carbon filter installed, compare the difference in concentration of the radioactive gas $^{18}F$. Comparison of radiation emission concentration difference of module a FASTlab and TRACElab. Results : Activated carbon filter are installed in the Hot cell, a measure of the concentration of radioactive gas was 8 $Bq/m^3$. Without activated carbone filter in the hot cell was 300 $Bq/m^3$. Tedlar bag prior to installation of the radioactive gases a measure of the concentration was 3,500 $Bq/m^3$, $^{11}C$ synthesis of the measured concentration was 27,000 $Bq/m^3$. After installed a Tedlar bag and a measure concentration of the radioactive gases was 300 $Bq/m^3$ and $^{11}C$ synthesis was 1,000$Bq/m^3$. Conclusion : $^{11}C$ radioactive gas that was ejected out of the Hot cell, with the use of a Tedlar gas sampling bag stored inside. A compound of 11C is not absorbed onto activated carbon filter. But can block the release out by storing in a Tedlar gas sampling bag. We was able to reduce the radiation exposure of the worker by efficient radiation protection.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.543-553
• /
• 2023

The current status of domestic a agalmatolite mines in South Korea was investigated with a view to establishing a stable supply of agalmatolite and managing its demand. Most mined agalmatolite deposits were formed through hydrothermal alteration of Mesozoic volcanic rocks. The physical characteristics of pyrophyllite, the main constituent mineral of agalmatolite, are as follows: specific gravity 2.65~2.90, hardness 1~2, density 1.60~1.80 g/cm³, refractoriness ≥29, and color white, gray, grayish white, grayish green, yellow, or yellowish green. Among the chemical components of domestic agalmatolite, SiO₂ and Al₂O₃ contents are respectively 58.2~67.2 and 23.1~28.8 wt.% for pyrophyllite, 49.2~72.6 and 16.5~31.0 wt.% for pyrophyllite + dickite, 45.1 and 23.3 wt.% for pyrophyllite + illite, 43.1~82.3 and 11.4~35.8 wt.% for illite, and 37.6~69.0 and 19.6~35.3 wt.% for dickite. Domestic agalmatolite mines are concentrated mainly in the southwest and southeast of the Korean Peninsula, with some occurring in the northeast. Twenty-one mines currently produce agalmatolite in South Korea, with reserves in the order of Jeonnam (45.6%) > Chungbuk (30.8%) > Gyeongnam (13.0%) > Gangwon (4.8%), and Gyeongbuk (4.8%). The top 10 agalmatolite-producing mines are in the order of the Central Resources Mine (37.9%) > Wando Mine (25.6%) > Naju Ceramic Mine (13.4%) > Cheongseok-Sajiwon Mine (5.4%) > Gyeongju Mine (5.0%) > Baekam Mine (5.0%) > Minkyung-Nohwado Mine (3.3%) > Bugok Mine (2.3%) > Jinhae Pylphin Mine (2.2%) > Bohae Mine. Agalmatolite has low thermal conductivity, thermal expansion, thermal deformation, and expansion coefficients, low bulk density, high heat and corrosion resistance, and high sterilization and insecticidal efficiency. Accordingly, it is used in fields such as refractory, ceramic, cement additive, sterilization, and insecticide manufacturing and in filling materials. Its scope of use is expanding to high-tech industries, such as water treatment ceramic membranes, diesel exhaust gas-reduction ceramic filters, glass fibers, and LCD panels.