• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2007

An investigation has been made on the relationship between characteristics of Acoustic Emission (AE) signal in welding flaw and the stress corrosion defect in-service for the high pressure pipe steel. In order to tackle the problem of welding flaw in high pressure pipe, specimens were made by the aid of the application of both corrosion liquid usage and a quenching method after local heating. The amplitude of signal was $60{\sim}75\;dB$ in the territory which is suspected for defect, and the specimens which only have welding flaw showed gradients of 0.034, 0.034, 0.035. Moreover, there is a certain increase in gradient even though the differences are very slight. That is, corrosion specimens showed new gradients of 0.040, 0.039, 0.041 which put welding flaw and corrosion mechanism together. After pressurizing 3 minutes, AE signal has been detected from welding flaw easily in each part of the section. It is possible to predict the occurrence and also prevent the damage of stress corrosion crack which has characteristics of cleavage fracture.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.368-375
• /
• 2013

Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.2
• /
• pp.48-60
• /
• 1993

1974년에 유럽에서 시작된 PISC(Program for the Inspection of Steel Components ; PISC-I, II, III) 수행결과나 1980년대초 실시된 미국의 BWR 원전 배관계통의 입계응력부식균열(IGSCC ; Intergranular Stress Corrosion Cracks)검사결과에서 나타난 바와 같이 기존의 규격 요건과 절차에 따른 원자력발전소 기기에 대한 초음파탐상검사는 그 실효성에 많은 문제점이 제기되었다. 따라서, 원전기기의 건전성 및 초음파탐상검사 결과의 신뢰도를 보증하기 위한 각종 연구가 진행되고 여러 방안이 모색되어 왔다. 그 결과, 원전 가동중검사 규격에 "초음파탐상검사자 자격인정 요건"과 "초음파탐상검사 시스템(검사자, 장비 및 절차서)에 대한 기량검증 요건"이 새로이 부가되었다. 본고에서는 초음파탐상검사 결과의 신뢰도 확보에 있어 필수불가결한 요건인 원전기기 초음파 탐상검사 시스템에 대한 기량검증 요건을 자세히 기술한다.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.31-36
• /
• 2004

Defective components of interest include not only homogeneous components, but also components with weldments where tensile properties vary across the weldment. Noting that the region near the weldment is the most vulnerable place for crack initiation and subsequent growth, defect assessment methods for homogeneous structure. Moreover, weldment width and crack location also affects the deformation and fracture behavior of the welded joints. These weld characteristics can evaluate using plastic limit load. So in this paper, evaluate plastic limit load both full circumference part-throughwall cracked pipes and circumference through-wall cracked pipes considering weld characteristics. And using evaluate results, proposed J-integral and crack opening displacement(COD) estimate method based on reference stress method.

• Journal of the KSME
• /
• v.31 no.3
• /
• pp.267-275
• /
• 1991

LBB 설계법은 오늘날 같이 플랜트의 대형화 및 복잡화함에 따라서, 균열이 발생하였다고 하여도 기기의 점검시 발견하지 못하는 수가 있을 것이다. 이러한 경우에 있어서 LBB 설계법은 fail safe design으로서 만일의 손상이 발생하더라도 플랜트의 안전성 및 경제성 확보를 위하여 매우 중요한 설계법이다. 이 LBB 설계법은 위에서도 설명하였듯이 선진제국에서는 상당히 연구가 진전되어 있으나, 우리나라에서는 이 분야에 연구가 전혀 없는 실정이다. 특히 에너지자원이 부족한 우리나라로서는 LNG, LPG 가스의 수입에 있어서, 이러한 저온가스를 운반할 tanker의 개발에 있어서도 LBB의 확보가 중요한 것이다. 또한 발전에너지원을 석유에만 의존하는 현재의 추세에서, 우라늄 등에 의한 원자력발전으로 대체되어 가고 있는 현재 전 발전능력의 약 50%를 의존하고 있는 실정이다. 이러한 면에서 실제의 구조물이 일시에 파단이 일어나지 않고, 파단 신뢰성이 충분히 높다는 것을 실증하여 둔다는 것은 안전성평가상 지극히 중요한 것이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.213-226
• /
• 2001

최근 가속화되어 가는 산업발전으로 인하여 산업구조물 및 기계 부품의 안정성 및 비파괴 검사에 대한 요구가 크게 대두되고 있다. 이는 곧 산업구조물 및 제품의 품질 향상을 위한 기존의 검사방법으로는 제품의 완성도를 높이기 어렵다는 것을 의미하며, 제품의 질을 향상시키기 위해서는 새로운 비파괴 평가방법이 필요하다는 것을 의미한다. 또한 모든 구조물의 보수 유지 및 안전성 진단의 차원에서 모든 산업적 구조물의 변형과 응력, 진동모드, 미소3차원 형상에 대한 평가 및 해석은 구조물의 수명과 관계되어 그 중요성이 크다 할 수 있다. 이에 본고에서는 기존의 비파괴검사 방법들이 많은 장점이 있음에도 불구하고, 단점을 극복할 수 있는 평가 기술로서, 고체재료 및 산업구조물 - 기계구조물, 전자 부품, 배관, 토목건축 구조물 등 - 의 변형, 결함, 균열, 응력 등을 검사 및 평가할 수 있는 광학적인 비파괴 평가 방법에 대해 소개하고자 한다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.224-225
• /
• 2005

The lightness of components required on marine and shipbuilding industry is requiring high strength of components. In particular, fatigue failure phenomena, which happen in metal, bring on danger in human life and property. Therefore, antifatigue failure technology takes an important part of current industries. In this study, it was investigated about endurance and fatigue crack propagation rate of according to stress ratio of SMAW commonly using for welding structures in present. Fatigue crack propagation rate(da/dN) of low load(R=0.1) was lower than of high load(R=0.6) for piping weld. And in stage I, ${\Delta}$Kth, the threshold stress intensity factor of the weld under heavy load is higher than under small load. Fatigue life shows more improvement in the weld of stress ratio R=0.l than in the weld of stress ratio R=0.6.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.228-229
• /
• 2005

The compressive residual stress, which is induced by shot peening process, has the effect of increasing the intrinsic fatigue strength of surface and therefore would be beneficial in reducing the probability of fatigue damage. However, it was not known that the effect of shot peening in corrosion environment. In this study, the effect of shot peening on corrosion fatigue crack growth of sping steel immersed in 6% $FeCl_3$ solution and corrosion characteristics with considering fracture mechanics. The results of the experimental study corrosion fatigue characteristics of spring steel are as follows; the fatigue crack growth rate of the shot peening material was lower than of the un peening material. And fatigue life shows more improvement in the shot peening material than un peening material. This is because the compressive residual stress of surface operate resistance of corrosion fatigue crack propagation. It is assumed that the shot peening process improve corrosive resistance and mechanical property.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.327-332
• /
• 2008

For the cracked component under combined primary and secondary stress, an interacion between the loads occurs and the secondary stress is relaxed by the primary load. To account for this phenomena, R6 code provides the correction factor which is called V-factor. However, evaluation corrected with V-factor need to be examined for its conservatism. In this paper the conservatism of the current V-factor is examined for the circumferentially cracked pipe under the combined load and new evaluation method is proposed to reduce the conservatism.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1123-1131
• /
• 2008

This paper provides V-factor estimation under combined mechanical and thermal load for circumferential cracks. Results are based on finite element analyses and effect of types and magnitudes of the thermal stress, crack geometry, the loading mode and plastic strain hardening on variations of the V-factor are investigated. The results of finite element analyses are compared with R6 values. As a result, it is shown that R6 gives generally conservative results. The conservatism is especially increased for the combination of large mechanical and thermal load. As a result, new estimation method which uses failure assessment line in R6 is proposed for V-factor and gives less conservative results.