• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.157-164
• /
• 1994

인체 동맥혈관내 혈액의 유동현상을 수치적으로 해석하기 위해서는 혈액의 유변학 적 성질을 구성방정식으로 나타내어야한다. 본 연구에서는 혈액의 점성계수를 표현하기 위 하여 비뉴턴유체의 점성을 나타내는 식으로서 Carreau 모델, 수정 Cross 모델, 수정 Powell-Eyring 모델과 수정멱법칙모델을 사용하였고 원형관내 혈액의 정상유동을 수치모사 하기 위하여 겉보기점성계수를 이용하는 구성방정식을 운동량방정식에 적용하였다. Carreau 모델과 수정멱법칙모델을 적용할 때 레이놀즈수의 변화가 중심선상의 속도와 길이방향의 압 력변화에 미치는 영향을 고찰하였다. 전단율이 높은영역에서 혈액의 겉보기점성계수를 효과 적으로 나타낼수 있는 수정멱법칙모델을 제시하였다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.621-632
• /
• 2007

The purpose of this study was the estimation and formulation of orthotropic flexural rigidities considering the deformed shape for a plate stiffened with rectangular ribs. Analytical results of methods modifying the flexural rigidity of the x-direction, the y-direction or both directions were compared at the center, the x-directional quarter point and the y-directional quarter point of stiffened plates loaded at the center. The composite method modifying the flexural rigidity of both directions improves the accuracy compared with the other methods. Moreover, the ratio of modified coefficients for each directional rigidity can be expressed as a function corresponding to each dimension of stiffened plates. The application of modified coefficient functions to various types of stiffened plates with different boundary conditions, aspect ratios and rib arrangement shows that the increment of the error ratio is small compared with examples of this study and the application of proposed functions shows more accurate results than previous methods modifying the flexural rigidity. Therefore, by using the modified coefficient functions proposed in this study, the orthotropic plate analysis of plates stiffened with rectangular ribs can easily achieve more accurate displacement results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.101-111
• /
• 2005

In this study, it is investigated the modified modulus of elasticity of the reinforced concrete columns including the longitudinal reinforcing steels as well as the confinement effect of the core concrete due to the transverse reinforced steel through the literature reviews. Equations are derived in order to evaluate the modified modulus of elasticity for the reinforced compressive concrete including the confinement effect. The finite element analysis for the 20 story reinforced concrete building is undertaken as a case study depending on the steel ratio and modulus of elasticity, and the analysis results are discussed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.45-49
• /
• 2008

This paper investigated the accuracy of the current design formulae for the elastic buckling strength of web-tapered I-beams in AISC-LRFD specification. The basic concept is to replace a tapered beam by an equivalent prismatic beam with a different length, but with a cross section identical to that of the smaller end of the tapered beam. The modification factor, B, is used to account for the stress gradient within the unbraced length and the lateral restraining effects offered by the adjacent segments. The modification factor(B) suggested in AISC-LRFD specification was compared with the finite element method(FEM) results. This paper presented a redefined method to calculate the modification factor(B).

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.104-111
• /
• 2010

This paper presents an adaptive image enhancement method using the spatial frequency property in the DCT(discrete cosine transform) compressed domain. The dc coefficients, the illumination components of image, are adjusted to compress the dynamic range of image, and the ac coefficients are modified to enhance the contrast by using the human visual system(HVS) and the spatial frequency property. The ac coefficients are separated into vertical direction, horizontal direction, and mixed spatial frequency components, and adaptively modified to minimize the block artifacts that possibly occur in the image enhancement. The proposed method using dynamic range compression and adaptive contrast enhancement shows the advanced performance without the block artifact compared with existing method.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.475-481
• /
• 2011

In this study, a simplified method of improving not only transverse shear stress but also shear strain based on the first-order shear deformation theory was developed. Unlike many established methods, such as the higher-order shear deformation and layerwise theories, this method can easily apply to finite elements as only $C^0$ continuity is necessary and the formulation of equations is very simple. The basic concept in this method, however, must be corrected:the distribution of the transverse shear stresses and shear strains through the thickness from the formulation based on the higher-order shear deformation theory. Therefore, the shear correction factors are no longer required, based on the first-order shear deformation theory. Numerical analyses were conducted to verify the validity of the proposed formulations. The solutions based on the simplified method were in very good agreement with the results considering the higher-order shear deformation theory.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.185-196
• /
• 1996

The purpose of this paper is to modify the ASME Code Z-Factor, which is used in the evaluation of circumferential surface crack in nuclear ferritic pipings. The ASME Code Z-Factor is a load multiplier to compensate plastic load with elasto-plastic load. The current ASME Code Z-Factor underestimates pipe maximum load. In this study, the original SC. TNP method is modified first because the original SC. TNP method has a problem that the maximum allowable load predicted from the original SC. TNP method is slightly higher than that measured from the experiment. Then the new Z-Factor is developed using the modified SC. TNP method. The desirability of both the modified SC. TNP method and the new Z-Factor is examined using the experimental results for the circumferential surface crack in pipings. The results show that (1) the modified SC. TNP method is good for predicting the circumferential surface crack behavior in pipings, and (2) the Z-Factor obtained from the modified SC. TNP method well predicts the behavior of circumferential surface crack in ferritic pipings.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.149-154
• /
• 2019

The structural system of domestic high-rise apartments can be divided into two parts; the core wall system, which is composed of walls concentrated in the center and the shear wall system, which comprises a great number of walls distributed in the plan. In order to analyze the lateral behavior of each system, buildings with typical domestic high-rise apartment plans were selected and nonlinear static analysis was performed to investigate the their collapse mechanism. From the force-displacement relation derived from nonlinear static analysis, response modification factor was evaluated by calculating the overstrengh and ductility factor, which are important in the seismic response. The ductility of core wall system is small, but as it is governed by wind load, its overstrength is greatly estimated, and its response modification factor is calculated by the overstrengh factor. Due to a large number of walls, shear wall system has a large ductility, making the response modification factor considerably large.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.546-550
• /
• 2010

무인잠수정이 원하는 경로를 추종할 수 있도록 안정적인 운항제어를 수행하기 위해서는 잠수정의 동역학적 특성을 정확히 파악하는 것이 필요하다. 수중에서 거동하는 무인잠수정의 동역학적 특성은 제어입력뿐만 아니라 유체력계수에 의해 주로 결정되므로, 이러한 계수값을 정확하게 아는 것이 중요한 요소라 할 수 있다. 일반적으로 유체력계수는 PMM 시험과 같은 실험적 방법을 통하여 얻게 되지만 실험방법의 어려움과 실험장비들의 부정확성으로 인한 오차에 의하여, 얻어진 값들의 신뢰성이 많이 저하된다. 계수값들을 구할 수 있는 다른 방법으로는, 확장칼만필터 등과 같은 모델기반 추정 알고리즘을 통하여 유체력계수를 추정하는 것이다. 본 논문에서는 확장칼만필터를 이용하여 유체력계수를 추정하도록 하였으며, 설계된 추정 알고리즘의 성능을 검증하기 위하여 기존에 수행된 PMM 시험에 의해 얻어진 유체력계수의 실험값과 비교 분석하였다. 또한 본 논문에서는 만타형 무인잠수정을 이용하여 원하는 경로를 추종할 수 있도록, 추정된 유체력계수를 사용하여 수심제어 및 방향제어를 위한 슬라이딩 모드 제어기를 설계하였으며, 충분한 정확도를 가지고 원하는 경로를 추종함을 시뮬레이션을 통해 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.191-201
• /
• 2006

New design equations for calculating the lateral-torsional buck ling moment resistances of stepped I-section beams with/without continuous lateral top-flange bracing subjected to a point load, a series of point loads, and a uniformly distributed load, are suggested based on the results of elastic finite-element analyses. The new equations presented in this study are compared with the current moment gradient modifiers presented by other researchers and specifications. Although the study paper presents mainly stepped-beam cases subjected to a point load and a uniformly distributed load. The proposed equations include the length-to-height ratio effects for stepped beams with continuous lateral top-flange bracing. The new moment gradient correction factors could be easily used to calculate the lateral-torsional buckling moment resistance of stepped I-beams.