• Korean Security Journal
• /
• no.62
• /
• pp.135-158
• /
• 2020

In casinos, security personnel who manage the safety of customers and employees play a very important role. In particular, there is a high percentage of female employees in casinos, and because the ratio of female and male employees is similar, the probability of female customers or female employees experiencing accidents may be similar to or higher than that of males. Women's security agents who handle women's case accidents can provide female customers and employees with a security service that only women can do. However, most of the agents doing security work at casinos are male, and the proportion of women is very low. Therefore, this research is about employees who are currently working as women in casinos and conducted qualitative research to find out about various experiences they experienced while working in the casino. A total of five study participants were interviewed three times to analyze and categorize the data collected. The first question is the professor's recommendation, his personal information search and his acquaintance's recommendation. The second question, the factors behind the necessary skills at work, are various athletic skills, good physical conditions and foreign language skills. In the third question, the satisfaction factors of the task are the scarcity value of the work, the satisfaction of the pay, the suitability of the individual and the expectation of the future, and the unsatisfactory factors of the work are the risk of the work, the stress on the customer, the discrimination against the sex, the gaze around, the tiredness of the shift work. In the fourth question, factors on the need for female casino security agents are providing differentiated services to female customers, protecting female employees and providing opportunities for women in related majors. The results of this study were interviewed by an expert of more than 20 years in the casino security business, and female casino security agents said that since it is a necessary requirement, they should seek a direction for development through institutional and cognitive improvement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.221-239
• /
• 2010

Bone loss may occur depending on the loading conditions. careful treatment planning and prosthetic procedures are very important factors for the proper distribution of stress. Evaluate the stress distributions according to numbers and location of implants in three-unit fixed partial dentures. A mandible missing the right second premolar, first molar and second molar was modeled. Using the CT data. we modeled a mandible with a width of 15mm, a height of 20mm and a length of 30mm, 2mm-thickness cortical bone covering cancellous bone mallow. An internal type implant and A solid type abutment was used. A model with 3 implants placed in a straight line, offset 1.5 mm buccally, offset 1.5 mm lingually and another model with 3 implants offset in the opposite way were prepared. And models with 2 implants were both end support models, a mesial cantilever model and a distal cantilever model. Three types of loading was applied; a case where 155 N was applied solely on the second premolar, a case where 206 N was applied solely on the second molar and a case where 155 N was applied on the first premolar and 206 N was applied on the first and second molar. For all the cases, inclined loads of 30 degrees were applied on the buccal cusps and vertical loads were applied on the central fossas of the teeth. Finite element analysis was carried out for each case to find out the stress distribution on bones and implants. This study has shown that prostheses with more implants caused lower stress on bones and implants, no matter what kind of load was applied. Furthermore, it was found out that inclined loads applied on implants had worse effects than vertical loads. Therefore, it is believed that these results should be considered when placing implants in the future.

• Korean Journal of Occupational Health Nursing
• /
• v.2
• /
• pp.26-39
• /
• 1992

본 연구는 보건관리대행기관에 근무하는 산업간호사들의 보건관리업무실태 및 근무만족도와 이들간의 관계를 파악함으로써, 산업간호업무향상 및 효율적인 산업보건관리를 위한 기초자료로 제시하고자 시도되었다. 조사대상은 38개 보건관리대행기관중 24개 기관에 근무하는 산업간호사 118명중 97명을 대상으로 하였다. 연구기간은 '92년 5월부터 6월까지 설문조사를 실시하였으며 그중 89명이 설문에 응답하여 이를 분석 대상으로 하였다. 연구결과는 다음과 같다. 첫째, 보건관리대행기관의 간호사는 산업간호사의 일반적 특성과 비교해볼 때 기존 산업간호사와 유사하였다. 그러나 법정휴가를 받는다는 간호사가 59.1%로 더 낮았다. 둘째, 보건관리대행기관 산업간호사의 담당사업장수는 법적으로 30개 사업장, 2,000명의 근로자를 담당하도록 되어있는데 조사결과 법적기준인 보건관리사업장의 수를 담당하는 간호사는 57.1%를 차지하였고, 담당 근로자 수로 볼때는 2,000명이하가 29.8%를 차지하여 많은 산업간호사가 법적인 기준을 초과하여 산업보건관리를 대행하고 있는 것으로 나타났다. 셋째, 보건관리대행의 방문방법으로 교통편은 대행 기관차량을 이용하며, 간호사 혼자 산업장을 방문하는 것이 대부분으로 나타났고, 방문횟수는 100인미만이 월1회, 100인이상이 월2회로 규정된 것과 비교해보면 규정을 따르는 곳이 100인 미만의 경우 97.4%, 100인이상의 경우 86.4%였다. 또한 의사나 위생사는 방문을 안하거나 년1-5회 방문하는 것으로 나타나 보건관리대행의 주제공자는 간호사인 것으로 냐타났다. 또한 사업장 방문시 업무수행장소는 휴게실이나 사무실이 87.5%, 현장이나 수위실에서 하는 곳이 70.5%나 되어 뚜렷이 업무를 수행할 장소가 마련되지 않은 실정을 나타냈다. 네째, 보건관리대행에 근무하는 산업간호사의 애로사항은 사업장내에서는 조직과 체계상의 문제, 간호사 역할에 대한 인식부족, 권한과 자율성 부족 등을 들었고, 사업장 방문시에는 사업주와 근로자의 인식부족이 우선적으로 지적되었다. 또한 산업간호사는 보건관리 대행업무에서 사업장의 참여유도, 사업장 순회점검 및 개선지도, 보건교육, 건강상담이 우선적으로 실시되어야 한다고 하였다. 다섯째, 보건관리대행기관 산업간호사의 업무수행정도는 건강검진이나 직업병관리, 보건교육, 환경위생관리업무를 비교적 많이 실시하는 것으로 나타났다. 여섯째, 보건관리대행기관 산업간호사의 직무만족도는 전문적 위치나 상호작용, 업무요구등은 높게 나타났으나 보수와 산업보건관계자와의 관계등은 만족도가 낮게 나타났다. 또한 직무만족도에 대한 총화점수는 사업장근무자가 240점중 143.8인데 비해 보건관리대행기관 근무자는 230점중 129.61점으로 더 낮게 나타났다. 일곱째, 일반적 특성별 보건관리대행 산업간호사의 직무수행정도는 연령별 30세이상군이, 결혼상태별로 기혼군이, 경력은 1년이상인 군이, 근무시간 8시간인군이, 급여수준은 50만원이상인군이, 법정휴가가 있는 군이, 자질향상교육을 받은군이 담당사업장수가 30개이하인 군이, 더 높게 나타났다. 또한 연령군이 20-24군과 30세이상인군 (p<0.05), 결혼상태별로 기혼군과 미혼군(p<0.01), 급여수준별로 50만원미만군과 이상인 군(p<0.05), 법정휴가가 있는 군과 없는군(p<0.05), 자질향상 교육을 받은군과 받지못한 군(p<0.01), 담당사업장수가 30이하인 군과 31인이상인 군(p<0.05) 간에 유의한 차이를 보였다. 즉 산업간호사중 나이가 많고, 기혼이며 급여수준이 높고 법정휴가와 교육을 받고, 담당사업장수가 30이하인 군이 보건관리대행업무를 잘 수행하는 것으로 나타났다. 여덟째, 일반적 특성별 보건관리대행 산업간호사의 직무만족도는 연령별 30세이상군이, 결혼상태별로 기혼군이 경력은 1년이상인 군이, 근무시간 8시간인군이, 급여수준은 50만원이상군이, 법정휴가가있는군이, 자질향상교육을 받은군이, 담당사업장수가 30개이하인 군이 더 높게 나타났다. 또한 결혼상태별로 기혼군과 미혼군(p<0.01), 근무시간별로 8시간군과 9시간 이상인 군(p<0.01), 급여수준별 50만원 미만군과 이상군(p<0.05), 자질향상교육을 받은군과 받지 않은군(p<0.05) 사이에 유의한 차이를 보였다. 즉 산업간호사중 기혼이고 근무시간은 8시간이며 급여수준이 높고 자질향상교육을 받은 군이 만족도가 높은 것으로 나타났다. 아홉째, 보건관리대행기관 산업간호사의 업무수행정도와 직무만족도 사이의 상관관계를 보면 보수, 자율성, 업무요구가 높을수록 산업간호업무를 수행을 잘하는 것으로 나타났으며(상관관계 r>0.6, P>0.001), 전체적으로 총직무만족도와 업무수행정도와의 상관관계는 6346, P<0.001로서 만족도가 높을수록 업무수행정도가 높은 것으로 나타났다. 이상의 결과를 토대로하여 보면, 보건관리대행기관에 근무하는 산업간호사는 그 특성을 고려하여 업무도 사업장 근무자와 다르게 규정되어야 하며, 담당업무의 명확한 한계를 정해 중소규모사업장의 산업보건관리업무를 책임있게 수행할 수 있도록 뒷받침이 필요하다. 더불어, 직무만족도를 높일수 있도록, 산업간호사에 대한 다방면의 지원이 필요하다고 하겠다. 또한 보건관리대행기관 산업간호사는 나이가 많고 기혼이며 경력있는 간호사를 채용하고 근로조건을 잘 개선하면 직무수행정도가 더 높아질 것으로 보인다. 좋은 근로조건의 형성과 직무만족도 등을 높여 산업간호사의 직무를 효율적으로 수행할 수 있도록 하기 위하여는 보건관리대행기관에 관한 규정이 강화 보완되어야 하겠으며, 민간단체와 의료기관 뿐아니라 공공기관에서도 중소규모사업장의 보건관리업무를 담당하는 방향으로 전환하는 방안을 모색해 보아야 할 것이다.

• Clean Technology
• /
• v.11 no.3
• /
• pp.123-128
• /
• 2005

Among various metal oxides semiconductors, $TiO_2$ is the most studied semiconductor for environmental clean-up applications due to its unique ability in photocatalyzing various organic contaminants, its chemical inertness, and nontoxicity. $TiO_2$, however, has a few drawbacks to be solved such as reactivity mainly working under ultraviolet irradiation (${\lambda}$ < 387 nm) and electron - hole recombination on $TiO_2$. In this study, to extend the absorption range of $TiO_2$ into the visible range and enhance electron - hole separation, we synthesized platinum (Pt) deposited $C-TiO_2$. The presence of Pt as an electron sink has been known to snhance the separation of photogenerated electron-hole pairs and induce the thermal decomposition. The characterization of as-synthesized $Pt-C-TiO_2$ was performed by Transmission Electron Microscopic (TEM), the Brunuer-Emmett-Teller (BET) method, X-ray Diffractometer (XRD), UV-vis spectrometer (UV-DRS), and X-ray Photoelectron Spectroscopy (XPS). In order to estimate the photocatalytic activity of the synthesized materials, the photoelectron Spectroscopy (XPS). In order to estimate the photocatalytic activity of the synthesized materials, the photodegradation experiment of an azo dye (Acid Red 44; $C_{10}H_7N=NC_{10}H_3(SO_3Na)_2OH$)was carried out by using an Xe arc lamp (300 W, Oriel). A 420 nm cut-off filter was used for visible light irradiation. From the results, Pt-deposited $C-TiO_2$ showed a far superior phothdegradation activity to Degussa P25, the commercial product under the irradiation of visible light and enhanced photocatalytic activity of visible-working $C-TiO_2$. This is a useful result into the application for the purification system of dye wastewater using visible energy of sun light.

• Journal of agricultural medicine and community health
• /
• v.35 no.2
• /
• pp.177-192
• /
• 2010

Objectives: This study was conducted to examine the educational needs of elderly hypertensive or diabetes patients and educators for the education program development of cardiocerebrovascular high-risk group in community. Methods: This study was conducted with 60 hypertensive or diabetes patients aged 65 years or above (cardiocerebrovascular high-risk group) who had registered KHyDDI(Korea Hypertension Diabetes Daegu Initiative) Project and attended Hypertension Diabetes Intervention Center Program, and with 44 educators in the center between June and August, 2009. Data were collected using questionnaires including general characteristics, educational objectives, curriculum, contents, and methods. Results: The major findings of this study were as follows: In education methods, cardiocerebrovascular high-risk group and educators both preferred small-grouped(5-9 persons) or individual education, 30min-1 hour, 50%-50% of theory-practice ratio, 3 months of education. In education contents, both groups needed all the suggested contents. Five categories would be suggested for the development of education program. The first category was that there was no significant difference between cardiocerebrovascular high-risk group's needs and knowledge. The second was category of low knowledge level in cardiocerebrovascular high-risk group's knowledge. The repeated education would be necessary for this category. The third was category with large standard deviation in cardiocerebrovascular high-risk group's knowledge. Individual education would be necessary for this category. The fourth category was that there was significant difference between cardiocerebrovascular high-risk group's knowledge and knowledge assessed by educators. The improvement of educator's education skill would be necessary for this category. The fifth category was that there was significant difference between cardiocerebrovascular high-risk group and educator's needs. Conclusions: Small group or individualized and staged education reflecting above cardiocerebrovascular high risk group and educators' needs should be developed for more effective education to prevent and manage the cardiocerebrovascular disease.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.35-46
• /
• 2009

In order to investigate spatial and temporal distributional characteristics of major water qualities in the Saemangeum area during the Saemangeum dike construction, salinity, COD, dissolved nutrients(DIN, Silicate) and heavy metals were analyzed from the surface water collected in April, May, August and November 2002. The overall value of Salinity, COD, DIN, and silicate in surface waters were in the range of $13.08{\sim}31.96\;psu$, $0.12{\sim}3.43\;mg/L$, $0.001{\sim}2.638\;mg/L$, and $0.010{\sim}3.181\;mg/L$, respectively. The COD and DIN in each survey showed the highest concentration at the mouth of Mangyeong river estuary(St. 1) where freshwater flow into the Saemangeum area. The concentrations of nutrients were high in the inner part of the Saemangeum dike with low-salinity, and low nutrients in the outer part of the dike with high-salinity, which strongly indicated that concentrations were adjusted by physical mixing. The ranges of dissolved metals and acid-soluble Hg in surface seawater were $0.006{\sim}0.115{\mu}g/L$ for Co, $0.26{\sim}0.114{\mu}g/L$ for Ni, $0.14{\sim}0.93{\mu}g/L$ for Cu, $0.04{\sim}0.53{\mu}g/L$ for Zn, $0.010{\sim}0.043{\mu}g/L$ for Cd, $0.010{\sim}0.795{\mu}g/L$ for Pb, and $0.25{\sim}4.16{\mu}g/L$ for Hg. The highest concentrations of some metals except for Cd were found at the estuary(Sts. 1 or 3). In most cases, a decreasing order of metal concentrations towards open sea(low-salinity$\rightarrow$high-salinity) was observed and showed positive relationship with DIN and silicate caused by land base pollutants input. On the other hand, due to Cd desorption from suspended solids in saline water, dissolved Cd concentrations were high in high-salinity area and low in low-salinity. In November, Co, Zn, Cu and Pb were relatively high in the northern area of the outer-side of Saemangeum, which was only influenced by the Geum river discharge. The concentrations of most dissolved metals of this study were lower than those of the past data in this area, but higher than those in Lena river estuary under the pristine environment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.93-101
• /
• 1999

A simple experimental method was used in an attempt to realize the elevation of the fishing ability of purse seine in the sea area of Cheju Island, the changes of seine volume and tension in the purseline during pursing. Experiments carried out on the six types simplified reduced model seines which were made of knotless nettings. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two-ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cmfor seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. These model purse seines were made of the scale of 1/200 of its full scale, a 120 ton in the near sea of Cheju Island. Designing and testing for the model purse seines were based on the Tauti's law. Experiments were measured in the observation channel of a flume tank at the static conditions set up shooting and pursing equipments. Motion of purse seine during purse line was recorded by the two sets video camera for VTR which were placed in top and front of the model seine. The reading coordinate of seine volume carried out by the video digitization system, disk data for the purseline tension. An analysis were performed on the changes seine volume and tension in the purseline during pursing. The results obtained were as follows: 1. The seine volume during pursing was largest for Ⅵ seine with smallest d/l followed by V, IV, III, II and I seines, and tension in the purseline was small. 2. Seine volume during pursing can be expressed by the following equation; CVt=l-EXP[｛2.79 (d/l）＋0.35｝t-33.37 (d/l) ＋ 0.57] Where CVt is volume ratio, d is twine diameter, l is leg length and t is pursing time (sec). 3. Tension in the purse line during pursing can be expressed by the following equation; T= 1- EXP ｛0.57t ＋ 13.36 (d/l)+2.97｝ Where T is tension (kg) in the purseline during pursing.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.1
• /
• pp.16-31
• /
• 2003

The granites in the southern Gimcheon area can be divided into two parts, marginal hornblende biotite granodiorite (Mgd) and central biotite granodiorite to granite (Cgd). Mgd and Cgd are gray in color and display gradational contact relations and are mainly composed of coarse-grained and medium-grained rocks, respectively. Mgd has more frequent and larger mafic enclaves than Cgd, and the two granites partly show parallel foliation at thire contact with gneisses. From representative samples of the granites, K-Ar biotite ages of 197∼207 Ma were obtained. Considering the blocking temperature of biotite, it is suggested that the emplacement age of the granitic magma was probably late Triassic. The anorthite contents of plagioclases in Mgd display less variation than those of Cgd, indicating that Mgd crystallized within a narrow range of temperatures. In the Al$\_$total/-Mg diagram, the biotites from the granites plot within the subalkaline field, and the smooth slope indicates differentiation from a single magma. All amphiboles from the granites belong to magnesio-hornblende. The linear trends of major oxides, AFM and Ba-Sr-Rb indicate that Mgd and Cgd were fractionally differentiated from a single granitic magma body crystallizing from the margin inwards. The relations of modal (Qz+Af) vs. Op, K$_2$O vs. Na$_2$O, Fe$_2$ $O_3$ vs. FeO, Fe$\^$+3/(Fe$\^$+3/+Fe$\^$+2/) and K/Rb vs. Rb/Sr show that they belong to I-type and magnetite-series granitic rocks developed by the progressive melting products of fixed sources. REE data, normalized to chondrite value, have trends of enriched LREE and depleted HREE together with weakly negative Eu anomalies.

• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.11-16
• /
• 2004

Classification of esophageal motility disorders not yet finalized and is still ongoing as the new disorders are reported, and the existing classification is changed or removed. In terms of radiology, the primary peristalsis does not exist, and the lower end of the esophagus show the smooth, tapered, beak-like appearance. The esophageal motility disorder, which mostly occurs in the smooth muscle area, show the symptoms of reduction or loss (hypomotility) or abnormal increase (hypermotility) of peristalsis of the esophagus. It is important to understand the anatomy and physiology of the esophagus for the appropriate radiological method and diagnosis. Furthermore, the symptom of the patient and the manometry finding must be closely referred for the radiological diagnosis. The lower esophageal sphincter can be normally functioning and open completely as the food moves lower. Sperandio M et al. argues that the name diffuse esophageal spasm must be changed to distal esophageal spasm (DES) as most of the spasm occurs in the distal esophagus, composed of the smooth muscle. According to Ott et al., usefulness of barium method for diagnosing the esophageal motility disorder is Achalasia 95%, DES 71% and NEMD 46%, with the overall sensitivity of 56%. However, excluding the nutcracker esophagus or nonspecific disorder which cannot be diagnosed with the radiological methods, the sensitivity increases to 89%. Using videofluoroscopy and 5 time swallows, the average sensitivity was over 90%. In conclusion, the barium method is a simple primary testing method for esophageal motility test. Using not only the image but also the videofluoroscopy with good knowledge of the anatomy and physiology, it is believed that the method will yield the accurate diagnosis.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.