• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.385-386
• /
• 2022

본 연구는 방폭지역에서 정전기를 측정하는 설비 (EST:Electrostatic Transmitter), 측정 된 정전기를 저감시키는 설비(EES:Electrostatic Elimination System), 방폭지역에서 인체 정전기를 제거시키는 설비(방폭 디지털 제전봉)를 통한 비방폭구역에서 사용되는 정전기 측정장비와의 비교를 통하여 극히 제한적인 Basic Design(온도/압력/속 도/유량)으로 인한 설계나 장치 등 변경 등을 반영하여 방폭지역에대한 근본적인 문제점을 도출 제거할수 있는 방안을 마련했으며 기존 사용되었던 비방폭지역의 정전기 제거 시스템을 보완한 방폭지역의 정전기 화재폭발 예방 기술을 적용하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.711-712
• /
• 2008

여러 산업분야에서, 폭발이 발생할 경우 인명이나 장비에 심각한 피해를 입히게 되며, 폭발에 의한 피해를 최대한 줄이기 위하여 대부분의 국가는 나름대로의 법률이나 규칙, 규정 등의 적용을 강제하고 있으며, 그에 따른 인증 절차를 거치도록 하고 있다. 방폭형 전기기기에 대한 국제규격은 IEC와 북미의 NEC가 권위가 있다. 본 연구에서는 방폭형 전기기기에 대한 규격을 분석하기 전단계로 위험지역 분류에 대한 IEC, NEC 규격별 차이를 먼저 비교 분석하였으며, 또한 향후 대형 전동기의 방폭형 시장 확대가 예상되는 '압력'형 전동기에 대해 적용 규격을 분석하고 설계에 반영할 수 있도록 하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.1
• /
• pp.55-70
• /
• 2003

Ammunition magazine, which is installed on the ground, has difficulty in protecting from the external attack, and accidental explosion should cause great damage to the life and property. For these reasons, it is needed to develop underground magazine that it has the advantages of safety, security and maintenance. This paper introduce the design case for blasting facilities, which should resist blasting pressure, as well as layout of underground magazine, which takes a safety for explosion and a working space of loading/unloading machine into consideration. On the layout, in case of ${\bigcirc}{\bigcirc}$ underground magazine, put three storage chambers in position almost parallel with principle stress direction, where less effected on discontinuity and hard rock area. Also, secured safe distance according to safety criteria of the Defense Ministry, and verified suitable layout by trace simulation for loading/unloading machine on working stage. Blasting design was performed on evaluation of maximum blast pressure between donar and acceptor chambers, and design condition for blast door, valve, etc. Diminution facilities against explosion, such as thrust block or debris trap, determined its size after plan in accordance with blasting criteria and calculation by structural analysis.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.78-85
• /
• 2018

In this study, we analyzed risks of the fabrication process equipment and cleanroom for semiconductor/flat panel display (FPD) manufacturing facilities and studied the fundamental safety measures for the risk factors. We examined the explosion proof design models considering the specificity of equipment and environment, and planned to utilize the findings to provide technical standards and grounds for designing and manufacturing related equipment. We believe that this study will contribute to the establishment of technical standards for semiconductor/FPD industry and businesses in many different ways by providing optimized modeling of high-risk explosion site detection, developing safety standards and hazard countermeasures and voluntary activation of safety certification system for operation of fabrication process equipment.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.27-33
• /
• 2022

As the scale of explosions diversifies along with the expansion of gas handling and storage facilities, studies on explosion-proof facilities in preparation for accidents is being actively conducted. The gastight door blocks the expansion pressure caused by blast waves or internal fires, and at the same time protects the personnel and equipment inside. For gastight doors, the regulations related to explosion-proof design are not clearly presented, and studies on the explosion pressure resistance performance evaluation of the facility are insufficient. In this study, the gastight door was modeled in a 3D shape with reference to the regulation ASTM regarding the gastight door standard. Afterwards, evaluation for blast-resistant performance of gastight door using Numerical simulation was evaluated by using ANSYS Explicit Dynamics to compare the deformation.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.86-92
• /
• 2012

An exploration well is drilled where oil or gas potential is shown by a seismic survey and interpretation. With the advance of drilling technology, most of the easily accessible oil had been developed by the end of the 20th century. To satisfy the ever increasing demand for oil, and bolstered by high oil prices, the major oil companies started to drill in deep water, which requires a deep offshore drilling unit. Offshore drilling units are generally classified by their maximum operating water depth. Many semi-submersible rigs have been purpose-designed for the drilling industry as the allowable drilling water depth has become deeper by the developed technics since the first semi-submersible was launched in 1963. Semi-submersible rigs are commonly used for shallow to deep water up to 3,000 m. Drilling equipment such as a top drive, blowout preventer, drawworks and power system, mud circulation system, and subsea wellhead system are explained to help with an understanding of offshore drilling procedures in the oil and gas fields. The objective of this paper is to introduce the main components of a semi-submersible rig and, by doing so, to raise the awareness of offshore drilling, which accounts for over 30% of the total oil production and will continue to increase.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.583-587
• /
• 1998

본 논문에서는 대형 탱커선의 의무 장비인 유배출 감시 장비 (Oil Discharge Monitoring Equipment)를 위한 유분 농도계의 설계에 대하여 연구하였다. ODME는 국제해사기구 (IMO)에서 일정 ton 이상의 대형 선박에 의무적으로 설치하도록 규정하고 있으며 이는 날로 심각해지는 해양 오염을 방지하는데 목적이 있다. ODME의 구성 요소는 중앙 제어 장치, 유분 농도계, 유량계, 선속계, Sampling System, 배출 제어 장치로 이루어져 있으며 이중 가장 중요한 것은 유분 농도계이다. 이는 선박에서 배출되는 물에 포함된 유 성분을 ppm 단위로 계측하는 것이다. 이를 위한 탁도 측정 방법에는 여러 가지가 있지만, 본 연구에서는 선박에서 사용이 용이한 광산란 방식과 방폭성을 가지는 광섬유를 이용하여 탁도를 측정하는 유분 농도계를 설계하였으며 아울러 이에 대한 탁도 계산 알고리즘에 대하여 고찰하였다. 측정의 정밀도는 0-999ppm 범위에서 $\pm$5%의 오차 이내로 측정이 가능함을 보였다. 이는 IMO의 규격 ($\pm$10%의 오차)에 만족하는 수치이다.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.79-84
• /
• 1998

This paper describes the minimum ignition limit voltages for LPG-Air 5.25[Vol$\%$] mixture gas by discharge sparks in radio-frequency limits using RF power supply and IEC type ignition spark apparatus. As a result, the minimum ignition limit voltages is increased in proportional to the rate of increasing of frequency in LPG-Air mixture gas. Especially, the minimum ignition limit voltages increase remarkably between 3[KHz] and 10[KHz]. It is considered that ignition is caused by one discharge until 3[KHz] and, beyond 3[KHz] ignitiof is caused by more than two discharges. The reason is analyzed that energy loss is caused by existing pause interval between discharges. It is considered that the result can be used for not only data for researches and development of intrinsically safe explosion-proof RF machines which are applied tole-equipments and detectors used in dangerous areas but also for datum for its equipment tests.