• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.710-712
• /
• 2008

• Journal of Power System Engineering
• /
• v.6 no.2
• /
• pp.60-67
• /
• 2002

연삭가공은 나노스케일(Nano-scale)의 미소한 입자 절삭날을 이용한 가공으로, 공작물의 표면을 경면(Mirror surface)으로 가공할 수 있어 제품의 최종 마무리공정으로 사용되어 왔다. 그러나 연삭공정에 있어서는 공구(연삭숫돌)의 수명이 다하거나 가공계(Machining system)가 불안정해지면 채터진동과 연삭버닝 등의 현상이 발생하여 가공물의 표면품위를 저하시키는 요인으로 작용하고 있다. 따라서 본 연구는 원통플른지 연삭공정을 대상으로 공작물에서 발생하는 음향방출 신호와 연삭기 주축 모터의 동력 신호를 연삭가공 중에 검출하고, 이를 신경회로망에 적용하여 연삭가공 상태를 진단하는 시스템을 구축하고, 그 성능을 평가하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.596-602
• /
• 1998

한국의 차세대 원자로 (Korean Next Generation Reactor; KNGR)에 처음 적용되는 격납건물내에 설치된 재장전수조 (In-Containment Refueling Water Storage Tank; IRWST)는 기존 재장전수조의 기능외에 주입모드에서 재순환 모드를 전환생략, 일차계통으로 방출된 고온, 고압 냉각수의 응축 및 냉각 격납용기 방사능 오염방지, 원자로 동공층수 등 여러 가지 추가 기능을 가진 한층 진보된 설계개념이다. 발전소 천이사고 시 발생하는 Pipe Clearing, 응축진동 현상(Condensation Oscillations), Chugging 등의 열수력 현상들이 방출증기의 유동 및 가속도와 관련해 항력과 응력, 압력진동 등을 일으켜 IRWST 구조물에 영향을 미칠 수 있기 때문에 IRWST를 처음으로 시도하는 우리 나라로서는 이와 관련된 제반현상에 대한 심도 깊은 연구가 요구된다. 따라서 본 연구에서는 원자력 발전소 과도로 인한 가압기 안전밸브(Pressurizer Safety Valve) 또는 안전감압밸브(Safety Depressurization Valve) 작동시 IRWST로 방출되는 유체로 야기되는 하중 예측 모델을 기존의 BWR의 응축수조(suppression Pool)에서 일어나는 각종 현상을 토대로 이론적으로 체계적으로 유도하여 이를 비교, 분석하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.42.2-42.2
• /
• 2011

2010년 10월 28일 근일점을 통과한 103P/Hartley 2 혜성의 분광학적 특징을 연구하고자 11월 6일과 11일 양일간 보현산 천문대의 고분산 에셀 분광기 BOES(R~30,000)로 관측을 하였다. 우리는 Hartley 2 혜성의 고분산 분광자료를 Hwang et al.(2009)의 Machholz(C/2004Q2)혜성 가시광 영역($4800{\sim}8100{\AA}$) 고분산 분광 자료와 비교 분석하였고 그 결과 C2, CN, NH2,H2O+의 방출선 뿐만 아니라 다수의 미확인 분광선을 발견하였다. 또한 발견된 미확인 분광선을 설명하기 위하여 향상된 NH2방출선과 OH 방출선 등의 후보 물질을 이용하여 미확인선의 원인 물질을 제시하고자 한다. 이 발표에서는 지금까지의 분석 결과를 소개한다.

• Composites Research
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2004

Vacuum hot pressing has been used for the development of titanium metal matrix composites using foil-fiber-foil technique. Subsequent micro-mechanical characteristics of the composites are then investigated by means of several experimental methods. The levels of consolidation, together with mechanism based failure processes of the materials have been analyzed by employing a thermo-acoustic emission technique. As shown by the results, fiber strength degradation occurs during the consolidation, and particularly residual stresses results from the thermal expansion mismatch between fiber and matrix materials during cooling process are incorporated in the changes of mechanical properties of the finished products. In industrial applications, both qualitative and quantitative evaluations of the material-mechanical characteristics are particularly important, and therefore must be included in process development. The present paper represents a methodology by which this can be achieved.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.210-214
• /
• 2004

Since production of radioactive isotope for using PET, a lot of neutrons were produced. The produced neutrons were mainly shielded by concrete facility. Secondary photons are generated and emitted from the concrete shielding wall of the PET cyclotron since the proton-generated neutrons are thermalized and absorbed in the concrete wall and emit secondary radiations, i.e., photons. This study calculated neutron dose and photon dose at outside of the accelerator facility using MCNPX code. As results of the calculation, total dose were calculated less than limited dose by law.

• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.105-111
• /
• 2013

The gonadal development of triploid and diploid Pacific abalones, Haliotis discus hannai was histologically investigated in spawning season. Diploid abalones had matured oocytes and spermatozoa, but most triploid had spermatocytes or developing oocytes that was slightly retarded in gonadal development compared to diploid abalones. In spawning experiment of triploid and diploid abalones, spawning rates of diploid male and female were 100%, but those of triploid female was 50% and male was 25% respectively. Investigation of spawned abalone eggs and spermatozoa revealed that length of diploid sperms head were 17.47 ${\mu}m$, breadth of head were 10.31 ${\mu}m$, length of spermatozoa were 130.72 ${\mu}m$, but those of triploid spermatozoa were 11.83 ${\mu}m$, 7.89 ${\mu}m$ and 103.36 ${\mu}m$ respectively. Triploid spermatozoa were significantly small to diploid spermatozoa (p < 0.05). The eggs of diploid and triploid were not different in size. The cross experiment between oocytes produced by triploids and spermatozoa by diploids ($3n{\times}2n$ cross) revealed that no fertilization were occurred, and $2n{\times}3n$ cross also revealed same result.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.14-21
• /
• 2011

The plasma emission characteristics are investigated in cylindrical syringe plasma jet device. Cylindrical syringe electrode is applied AC power using inverter. In the center of syringe is injected into a inert gas and plasma jet occurs. If there is no ground electrode, firing voltage is 3 kV and plasma column length is 10 mm. According to high firing voltage and large current, the plasma column length control is difficult. The case of an internal ground electrode, firing voltage is 1 kV. Because of the losing current from internal ground, even if a higher input voltage, plasma emission does not occur. The case of an external ground electrode, the plasma column can be controlled between 0~10 mm with change the applied voltage from 1 to 2 kV, and the discharging current changed from 1 to 4 mA.

• Korean journal of applied entomology
• /
• v.56 no.3
• /
• pp.289-294
• /
• 2017

The Oriental fruit fly, Bactrocera dorsalis, has been designated as a main quarantine insect pest. Sensitive monitoring and diagnosis against B. dorsalis are required for early quarantine treatment. This study formulated a wax type dispenser containing methyl eugenol and biopesticide to attract and kill this insect. It also developed diagnostic PCR primers against five major quarantine fruit flies of B. dorsalis, B. cucurbitae, B. tryoni, B. latifrons, and Ceratitis capitata. The lure and diagnostic primers were evaluated in a field located in Kota Kinabalu, Malaysia.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.103-112
• /
• 2007

Flood issue for nuclear power plants designed and built in 1970 is extremely severe for main steam header compartment and main feedwater line region of intermediate building and lower floor. A calculation for flood level at the main feedwater line isolation compartment is now performing by hand calculation. But, this methodology is quite conservative assumption. The goal of this study was to develop method to analyze flowrate using the RETRAN-3D computer code, and the developed method was applied to flood level analysis following main feedwater line break. As a result of analysis, flood level was low remarkably.