• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.816-821
• /
• 2013

This case study presents a practical method to reduce resonant vibration of generator-motor set. The generator is driven at 1800rpm by induction integral motor. The vibration is below alarm limits, but the dominant frequency of vibration is sub-synchronous and close to that of bearing fault signal in spite of new bearings. To find an mechanism of abnormal vibration, ODS and Modal analysis is carried out. The measured modal characteristics were compared with those of FE Analysis. The ODS mode at rated speed is consistent with system natural frequency mode that is excited by bearings. To reduce vibration level, the isolation mount at system base is changed with new rubber mount for lower natural frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.393-398
• /
• 2002

Rubber isolator has properties that can adjust easily stiffness and can be formed various shape. Also, it has high damping and is effective about structure-borne noise at high frequency range, So, rubber mount has widely used to isolate vibration at industrial equipment and construction field. However, rubber material is nonlinear and require enough consideration about shape factor whenever it is designed. The purpose of this paper is to develop conical rubber mount using compression and shear elasticity. The first, the dimension of mount is calculated by theoretical analysis considering design condition and static characteristics have been analyzed by FEM method. In addition, the fatigue test of rubber mount is performed to get reliability for product life and dynamic stiffness test is executed to get dynamic magnification factor. Finally, transmissibility test of vibration isolator has been carried out to suggest normal quantity data about vibration isolation.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.100-106
• /
• 2012

Recently, the demand to acquire and improve durability performance has steadily risen in rubber components design. In design process of a rubber component, an analytical prediction is the most effective way to improve fatigue life. Existing methods of analytical estimation have mainly used an equation for fatigue life obtained from fatigue test data. However, such formula is rarely used due to costs and time required for fatigue testing, as well as randomness of rubber materials. In this paper, we describe fatigue life estimation of rubber component using only the results from a relatively simple tearing test. We estimated fatigue life of the Janggu type fatigue specimen and the automotive motor mount, and evaluated reliability of the proposed method by comparing the estimated values with actual test results.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.385-394
• /
• 2004

The objectives of this study were to investigate the effectiveness of rubber as an engine mount of walking-type cultivators and to determine its optimal spring constant and damping coefficient using a dynamic simulation of the engine mount system. Four different types of rubber mounts were tested to determine their spring constants and damping coefficients, and the best type was selected for the isolation of the engine vibrations transmitted to the handle. The total vibration levels transmitted to the handle when the rubber mounts weren't installed were 17.52 $m/s^2$. The total vibration levels transmitted to the handle when the rubber mounts were installed were 10.69 $m/s^2$ for Stripe 1, 11.33$m/s^2$ for Stripe 2, 10.92$m/s^2$ for Stripe 3 and 14.19$m/s^2$ for Hive, respectively, resulting in an average of $30\%$ reduction when compared with that without the engine mount. A dynamic model of the cultivator's engine-mount system and its simulation program were developed and verified. A method was proposed to determine the optimal spring constant and damping coefficient of the engine-mount system. It was found from the simulation that a spring constant of 4,100 kN/m and the largest damping coefficient were the most effective for the vibration isolation.

• 한국철도학회논문집
• /
• 제15권5호
• /
• pp.485-497
• /
• 2012

최근 철도의 소음, 진동에 대한 사회적 관심이 증가하면서, 철도 진동을 효과적으로 줄일 수 있는 플로팅 슬래브 궤도의 적용이 활발히 이루어 지고 있다. 본 연구에서는 플로팅 슬래브 궤도의 동적 거동을 보다 정확히 이해하기 위하여 실모형 실내 실험을 통해 정적 거동과 시스템 고유 진동수 부근의 저주파 대역에서 플로팅 슬래브 궤도의 동적 거동을 분석함으로써 플로팅 슬래브 궤도의 설계의 적정성과 설계에 적용되는 해석모델의 유효성을 입증하고자 하였다. 실험 및 유한요소 해석 결과에 따르면 플로팅 슬래브 궤도는 강체 모드 고유진동수보다 휨모드 고유 진동수에 가까운 대역에서 탁월 주파수가 나타나며 변형 형상도 휨모드가 가장 지배적인 모드가 되므로, 플로팅 슬래브 궤도의 설계 시에는 슬래브의 휨강성과 조인트 및 단부의 경계조건 등을 고려해야 한다. 또한 Kelvin-Voigt 모델을 사용한 2차원 유한요소 해석모델에 의한 해석 결과는 정적 및 동적 처짐, 하중 전달율 등 실험결과와 매우 잘 일치하는 것으로 나타나 플로팅 슬래브 궤도의 설계에 활용하기에 충분한 신뢰성을 가지고 있는 것으로 나타났다.