• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.134-139
• /
• 2005

This paper works on the manufacture and performance evaluation of bi-polar power supplied diesinking electrical discharge machine. The design and implementation of diesinking electrical discharge machine consists of two parts which are a polarity voltage controller design and a servo motor controller design and they are verified and manufactured through simulation. The performance of the implemented machine and conventional one were evaluated by comparing its machining speed and roughness of machined surface. Eventually, the designed machine showed improved performance in the speed and the roughness.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.309-315
• /
• 2018

In this paper, propose an efficient arc detection and control method to achieve fast machining speed, improved precision and surface roughness in discharge machining, especially for carbide and hard material processing and metal processing using discharge phenomenon as energy. A single discharge waveform is divided into three sections of Td (Time-Delay), Ton (Time-on) and Toff (Time-off) and the gate control timing is simulated using the HDL language. In this paper, we analyze the effect of the gap between the electrode and the workpiece on the machining results by determining the operation of the servo mechanism by sampling the Td section through the comparator circuit. As a result of the analysis, the Td section of the formed waveform was more precisely sampled at a high speed and the results were improved when applied to the gap control between the electrode and the workpiece.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.56-58
• /
• 2004

프레스금형의 부품 중에서 펀치와 다이플레이트를 제작하는 방법은 공작기계만을 사용하여 제작하는 경우와 공작기계와 와이어 컷 방전가공기를(W-EDM)를 병행 사용하는 경우가 있다. 그런데 공작기계만을 사용하여 제작 할 때는 금형수명(Die Life)이 200만-230만 스트로크였는데 와이어 컷 방전가공기를 사용한 제작에서는 70만-80만 스트로크에서 금형수명을 다하고 있다. 이것은 W-EDM후에 발생되는 가공변질층으로 예측되므로 W-EDM전과 W-EDM후의 가공면에 대한 SEM촬영을 실시하여 가공변질충의 발생여부를 확인하고 이에 대한 제거방법을 연구하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1884-1885
• /
• 2007

DC 80[V]의 주 전원에서의 방전 가공은 가공 시 서보계의 헌팅상태가 자주 발생되기 때문에 방전상태가 불안정 하였다. 본 연구에서는 DC 300[V]의 보조 전원을 주 전원과 중첩한 결과, 방전 개시 전압이 높게 됨으로써 서보계의 헌팅상태가 감소하여 방전이 매우 안정하게 되어 가공 능률을 향상하였다.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.1-7
• /
• 1999

This is the pre-study to pile up the basic technique for the electro-discharge machining in the field of micro-drilling. The machined chips are flowed out from the machining area by the flow arisen from the high speed rotation of the electrode. The cylindrical shape electrode, whose diameter is 0.5mm, is clamped by the three point clamping type clamper and the clamper is attached at the front shaft of the high speed rotating DC motor. The current for machining is controlled by pulse width modulation technique and the machining conditions such as frequency and duty ratio are changed to find out the effect of the variables for machined results.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.572-579
• /
• 2001

Recent industrial requirements for highly precise shape processing have brought the electric discharge machining (EDM) in great need. High precision in EDM is primarily achieved by high performance controllers. However there exists inherent precision loss due to structural deformation. On this background, we study structural deformation characteristics of wire cut EDM via finite element (FE) analysis and axiomatic design. Two different wire cut EDMs are selected as analysis models. 3D CAD package I-Deas is first used to construct FE models of wire cut EDMs, and then ABAQUS FE code is used for following structural analysis. Pertinency of FE mesh refinement is discussed in terms of ${\eta}-factor$. It is shown that performance accuracy of EDM depends strongly on the structural characteristics. Some design enhancements are suggested in an axiomatic design point of view. Finally we provide weight and temperature induced displacement discrepancies between wire end points as position functions of each subframe.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.511-514
• /
• 2004

Punch and die plate which are press die parts can be made using machine tool or using both machine tool and W-EDM. When machine tool is used, the die life is 2,000,000 to 230,000 strokes. But with W-EDM, the die life is 700,00 to 800,000 strokes. This can be caused by the process deformation layer after W-EDM. SEM pictures of processed section before and after W-EDM are taken to see if the process deformation layer appeared. Also the elimination method is studied.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.59-64
• /
• 2002

The effect of the numbers of processing on the punch and surface roughness of die block in the W-EDM, which is frequently used to manufacture parts of press die is studied. W-EDM equipment(Sodic A500H), the application of which has increased for its precision, is used in the process three times. To inspect the roughness of the three-time-processed dimension of the punch and the die, the surface roughness measuring instrument(System 5000 of Federal) is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.69-73
• /
• 2002

The effect of the numbers of processing on the punch and surface roughness of die block in the W-EDM, which is frequently used to manufacture parts of press die is studied. W-EDM equipment (Sodic A500H), the application of which has increased for its precision, is used in the process three times. To inspect the roughness of the three-time-processed dimension of the punch and the die, the surface roughness measuring instrument (System 5000 of Federal) is used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.311-312
• /
• 2010