• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.273-282
• /
• 1984

The Buncheon manganese ore deposits occur in vein along the fault of $N20^{\circ}E$, cutting the foliation of Yulri Series. The deposits consist of primary manganese silicate ores in the deeper part and superficial manganese oxide ores near the surface. The spatial distribution of manganese oxide ores with respect to the manganese silicate ores suggests that the manganese oxide ores are the supergene oxidation product of the manganese silicate ores. Manganese silicate ores consist mainly of fine-to coarse-grained pyroxmangite with minor rhodochrosite, quartz, sulfides and chlorite. Manganese oxide ores are composed of supergene manganese oxides such as nsutite, birnessite, manganite and todorokite, and other associated minerals. Paragenetic sequence of formation of the manganese minerals are as follows: $\array{{rhodochrosite{_{\rightarrow}^o}todorokite{_{\searro}^o}}\\pyroxmangite{_{\line(10){90}}^o}{\nearro}}birnessite{_{\rightarrow}^o}nsutite{_{\rightarrow}^s}manganite$ In order to elucidate the mineralogy of the manganese minerals, microscopic, X-ray, IR spectroscopic, and thermal studies were made for manganese and associated minerals.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.33-38
• /
• 2005

One piece of Haedong-Tongue(해동통보) minted at 1,102 A.D. was excavated from No.20 wooden coffin, Sinbong-dong, Cheongju. It was analyzed by micro-XRF and ICP and determined the concentrations of ten elements such as Cu, Pb, Sn, Zn, Fe, Mn, Sb, Co, As, Ag and Ni. The measurement of lead isotope ratios was also carried out in order to predict the provenance of raw materials used for minting of Haedong-Tongbo. It was found that Haedong-Tongbo was minted with three compositions of $Cu\;75.5\%,\;Pb\;13.3\%\;and\;Sn\;6.0\%$, which were different from the typical composition of Chosen-Tongbo and Sangpyung-Tongbo used in Chosen dynasty. Lead isotope ratios of Haedong-Tongbo showed that the provenance of lead used for minting of it suggested the possibility to be originated from Southern part of Korea.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.101-108
• /
• 2016

Lead isotope ratio of bronze artifacts excavated from Dongchon Site in Sunchang have determined by TIMS. As results of comparison lead isotope ratio of bronze objects with the provenance data of galenas of Korea, China, and Japan, the provenance of three material of bronze objects were turned out to originate from the southern and northern part of China. On the other hands, data were plotted either in zone 3 of the South Korean galena map. The results of these scientific analysis of bronze objects can be used as basic data in comparison researches on manufacturing technology, provenance of bronze objects to be found in the future.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.2 s.44
• /
• pp.81-89
• /
• 2006

Pb isotopic compositions were determined from the ore deposits of Beonam, Dongjin, Jeoksang and Bukchang mines distributed within Jeolabuk-do. As a result, individual mine shows significantly different values of Pb isotopic compositions from each other. Pb isotopic values of the Beonam, Bukchang and Dongjin mines altogether from linear variation, but it is too steep to represent their formation age. Instead, such trend suggests that these ore leads were originated from binary mixing. Precambrian basement rocks and Mesozoic granitoids are suggested for such two end-members. The relative contribution of lead from each source seems to be quite different for each ore deposit, implying that the circulation of the ore-forming fluid was very localized when they were formed. In the case of Dongjin mine it seems significant portion of the ore leads were originated from the basement rocks, which suggests that related igneous rock seems to have acted as heat source to generate circulation of the fluid rather than the source of the ore-forming elements.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.84-88
• /
• 1996

Pb isotope composition is analyzed from the rock chips of marbles intercalated between gneisses of Muju area and it shows very large variation ($^{206}Pb/^{204}Pb$=23.74~4142, $^{207}Pb/^{204}Pb$=16.32~18.43, $^{208}Pb/^{204}Pb$=36.42~39.75). The data points form well defined positive relationship on $^{206}Pb/^{204}Pb$ vs $^{207}Pb/^{204}Pb$ plot, which corresponds to $1.99{\pm}0.10$($2{\sigma}$) Ga. This age is very similar to the formation ages of the granitic gneisses from Buncheon and Cheondongri (Tanyang), and suggests that the fairly large volume of Sobaeksan Massif suffered regional metamorphism at this time. It is suggested that the most parts of Korean peninsula including Kyeonggi and Sobaeksan Massifs were very close each other and experienced a regional metamorphism together about 2.0 Ga ago from the fact that galenas from whole Korean Peninsula except Kyeongsang Basin and metamorphic rocks from Kyeonggi Massif also reveal a similar slope corresponding 2.0 Ga on Pb-Pb isotope plot.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.231-241
• /
• 2013

Analysis of the bronze bodhisattva from Pangyo-dong sites in Seongnam by computed tomography, ICP-AES, metallurgical microscope and SEM-EDS had to know manufacturing technique. And the origin of the raw material, was investigated using TIMS. Results with computed tomography, two bronze bodhisattva produced by lost-wax casting technique with hollow inside and could see the core of the inside. Result of component analysis and microstructure observation, material is alloy of copper-tin-lead and made by casting without artificial treatment. According to lead isotope ratio analysis result of bronze bodhisattva could be made into galena of the Gyeonggi massif in Korea South.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.1
• /
• pp.19-27
• /
• 2015

If $CO_2$ stored for geological sequestration escapes from deep formations and is introduced to shallow aquifers, it dissolves into groundwater, creates acidic environments, and enhance mineral dissolution from rocks and soils. Among these minerals, dissolution and spread of hazardous trace metals can cause environmental problems with detrimental impacts on groundwater quality. This study aims to investigate geochemical effects of $CO_2$ in groundwater on dissolution of galena, the main mineral controlling the mobility of lead. A series of batch experiments are performed with granulated galena in $CO_2$ solutions under various experimental conditions for $CO_2$ concentration and reaction temperature. Results show that dissolution of galena is significantly enhanced under acidic environments so that both of equilibrium concentrations and dissolution rates of lead increase. For thermodynamic analysis on galena dissolution, the apparent rate constants and the activation energy for galena dissolution are calculated by applying rate law to experimental results. The apparent rate constants are $6.71{\times}10^{-8}mol/l{\cdot}sec$ at $15^{\circ}C$, $1.77{\times}10^{-7}mol/l{\cdot}sec$ at $25^{\circ}C$, $3.97{\times}10^{-7}mol/l{\cdot}sec$ at $35^{\circ}C$ and the activation energy is 63.68 kJ/mol. The galena dissolution is suggested to be a chemically controlled surface reaction, and the rate determining step is the dissociation of Pb-S bond of surface complex.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.110-115
• /
• 1998

Self-potential, VLF-EM and dipole-dipole resistivity methods have been widely used for exploration of conductive sulfide ore deposit, because of the convenience and low cost of field work and the reliability of their results. The geophysical responses for vein-type sulfide outcrop of Changkoom mine located in Bukwi-Myon, Jinan-Gun, Chollabuk-Do were investigated and compared with its drilling results. The geology around the survey area is composed of acidic volcanics and sediments of Yuchon Group. And sulfides bearing pyrite, pyrrotite, galena etc. are deposited in disseminated or vein type within acidic volcanics. Typical geophysical responses were detected from the above vein type ore body, respectively. From the shape and extent of S.P. anomaly, ore body is dipping westward and extending about 50 m. It is detected that the VLF EM response matching the outline of ore zone is considered as indication of dyke dipping westward. And also resistivity response indicating conductive dipping dyke is detected. From drilling results for outcrop and geophysical anomalies, the shape of ore body is vein type dipping about $70^{\circ}W$ and extending about 50 m.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2018

This study investigated manufacturing technique and provenance of the Gilt-bronze Seated Bhaisajyaguru (Medicine Buddha) Statue of Janggoksa Temple. The statue had the following : Cu(68.8%)-Sn(10.4%)-Pb(17.1%), it is similar to other medium or large Buddha statue. As results of comparison lead isotope ratio of sample with the provenance data were plotted in zone 3 of the South Korean galena map. According to this result of Bronze Buddha could be made into galena of the located in same area the temple. The results of this study were compared with the Bronze Bodhisattva statue of Goseongsa Temple. The manufacturing techniques were different based on the characteristics of Buddha statues and thus could be made into galena of the located in same area the temple.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.185-197
• /
• 1995

Tungsten skarns in the Chungju mine which consists mainly of strata-bound type iron ore deposits are found in the vicinity of the contact between the age-unknown Kyemeongsan Formation and granitic rock intrusions of Mesozoic age($134{\pm}2Ma$). Tungsten skarns were formed extensively from alumina and silica-rich schistose rocks by the introduction of calcium and iron from hydrothermal solution. The skarns comprise a metasomatic column and are subdivided into four facies; garnet facies, wollastonite facies, epidote facies and chlorite facies. The skarn process in time-evolutional trend can be divided broadly into the four facies in terms of the paragenetic sequence of calc-silicates and their chemical composition. Skarn and ore minerals were formed in the following sequence; (1) garnet facies, adjacent to biotite granite, containing mainly garnet(>Ad96) and magnetite, (2) wollastonite facies containing mainly wollastonite and garnet(Ad95~60), (3) epidote facies, containing mainly epidote(Ps35~31), quartz, andradite-grossular(Ad63~50), and scheelite, (4) chlorite facies, adjacent to and replacing schist, containing mainly chrolite, muscovite, quartz, calcite, epidote(Ps31~25), hematite and sulfides. The mineral assemblage and mineral compositions. suggest that the chemical potentials of Ca and Fe increased toward the granitic rock, and the component Al, Mg, K, and Si decreased from the host rock to granitic rock. The homogenization temperature and salinity of fluid inclusion in scheelite, quartz and epidote of epidote facies skarn is $300-400^{\circ}C$ and 3-8wt.% eqiv. NaCl, respectively. ${\delta}^{34}S$ values of pyrite and galena associated with chlorite facies skarn is $9.13{\sim}9.51%_{\circ}$ and $5.85{\sim}5.96%_{\circ}$, respectively. The temperature obtained from isotopic com· position of coexisting pyrite-galena is $283{\pm}20^{\circ}C$. Mineral assemblages and fluid inclusion data indicate that skarn formed at low $X_{CO_2}$, approximately 0.01. Temperature of the skarn mineralization are estimated to be in the range of $400^{\circ}C$ to $260^{\circ}C$ and pressure to be 0.5 kbar. The oxygen fugacity($fo_2$) of the skarn mineralization decreased with time. The early skarn facies would have formed at log $fo_2$ values of about -25 to -27, and late skarn facies would have formed at log $fo_2$ values of -28 to -30. The estimated physicochemical condition during skarn formation suggests that the principal causes of scheelite mineralization are reduction of the ore·forming fluid and a decrease in temperature.