• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.67-70
• /
• 2011

현재 사용되는 대부분의 소방차량은 일반 원심펌프로 보편화된 방수 소화작전이 가능하나 오늘날 첨단화 되어 가는 구조물과 다양한 시설구조의 인프라에 따른 적응에는 한계가 있으며 이러한 현재의 다양한 화재 형태와 양상에 능동적으로 대처하며 효율적인 소방활동을 위하여 전천후 출동과 소규모 인력으로 효과적인 소화활동을 할 수 있도록 차량의 구조 개선과 새로운 유 무선포방수총시스템의 도입과 흠로 및 빙판길 혹은 협소한 출동로도 원활하게 효과적으로 대처할 수 있도록 괘도바퀴와 높은 흡상 및 미분무수 소화시스템을 장착한 미래형 소방차량을 연구 개발하고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.79-83
• /
• 2005

In the reinforced concrete structure, Even if speak that water leakage occurrence is no problem to material, there is a lot of reasons construction factor, material damage by behavior structure, properties of matter change by years and water leakage part by environment condition. so, waterproofing technological consideration should be gone ahead. In this research, we will study about stick performance, concrete surface adhesive, damage and blow. we will check all things and test it. The stick expansion type complex of flexible material passed on result of standard. It is conducive to concrete of durability by waterproofing layer performance demobilitation technology on the water leakage structure for solution of problem and repair

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.133-136
• /
• 2007

It has been applied the self adhesion waterproofing sheet which is developed from exist asphalt waterproofing sheet by heat and torch in domestic construction field. However, the problem of waterproofing have constantly happened due to air pocket condition and defect of joint part in waterproofing construction. Therefore, in this study, we would like to analyze the field application as testing in side of materials and construction method of self adhesion butyl rubber sheet and study of the materials performance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.649-652
• /
• 2006

The exist waterproofing membrane cause not to assure proper thickness in constructing. It become a serious problem which as decreasing of durability, waterproofing membrane to be tom and break down. Therefore, it is necessary that the expert have to construct waterproof works,, if not, it can be frost and thawing or chemical corrosion called one of the reason in maintaining the safety of concrete structure. In summarize, for this paper, it would be understand that exposed and compound experimental study of waterproofing sheet using coat material filling into the protuberance to improve the durability for concrete structure can widely apply to field to solve the these significant problem.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.293-294
• /
• 2021

본 연구는 어업에 종사하는 어업인을 대상으로 작업복 착용실태와 불편사항 및 문제점, 작업복에서 요구되는 기능 등을 알아보고 이를 통해 어업에 적합하고 작업 효율성을 높일 수 있는 기능적 작업복 개발에 필요한 요구사항을 파악하고자 하였다. 본 연구는 전남지역의 어업인 124명을 대상으로 하였다. 분석은 SPSS 26.0 프로그램을 활용하였다. 본 연구에 참여한 어업인은 50대가 가장 많았고 남성이 약 85%이며, 근무경력은 10년 이상 20년 미만이 많았다. 작업복은 상하 분리형을 좋아하며, 방수성을 가장 중요하게 생각하였다. 착용 작업복에 대한 만족도는 땀투과성을 제외한 모든 항목에서 보통으로 평가되었다. 선호하는 색상은 무채색이 가장 많고 상하 분리형 스타일과 지퍼 여밈을 좋아하였다. 연령에 따라 작업복 구입 시 고려사항에 유의미한 차이를 나타내 30대 이하와 40대는 활동성을, 50대는 내구성을, 60대는 방수성을 가장 중요하게 생각하였다. 연령에 따른 작업복 만족도는 활동성, 압박감, 탈착성, 맞음새, 두께감, 기능성, 보온성, 옷의 무게감 등에서 유의미한 차이를 나타냈다. 본 연구를 바탕으로 하여 실용적이고 기능적인 어업용 작업복 개발이 이루어져야 할 것으로 생각된다.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.17-24
• /
• 2018

This paper presents a numerical analysis of flow inside a water nozzle for fire fighting and observes the effect of the variation in primary components on internal flow. In order to observe the performance of water nozzles, they have been systematically designed and modelled, applying boundary conditions obtained from field experiments (inlet pressure at pump : 4 bar, and pressure outlet : atmospheric pressure). In addition, the governing equations were calculated to obtain velocity, pressure inside the nozzle. Two main parameters (the presence and length of sub-pipes) were considered with the aim to observe the detail internal flow characteristics. It is found that the base model is not significant on flow characteristics, but a negative effect (i. e. the reverse flow) at the entrance region of sub-pipe. On the other hand, the reverse flow was vanished when making the length of sub-pipe double.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.358-372
• /
• 1987

This study was performed to obtain data which can be applied to use of water-proof mortars. The data was based on the properties of water-proof mortars depending upon various mixing ratios to compare those of cement mortar. The water-proof agents used were retard and accelerate type which are being used as mortar structures. The water-proof agents, mixing ratios of cement to fine aggregate were 1:1, 1:2, 1:3 and 1:4. The results obtained were summarised as follows; 1. The results of flow test, water-cement ratio was increased with the increasing of mixing ratio. 2. The permeability were increased in poorer mixing ratio and higher water pressure. 3. The bulk density was decreased with the increasing of mixing ratio, and compressive and tensile strength were increased with increasing of the bulk density. 4. At 1:1 mixing ratio, the highest strengths were showed and strengths were decreased with the increasing of mixing ratio. 5. The absorption rates were increased in- poorer mixing ratio 6. The correlation between W/C, permeability, bulk density, compressive strength and absorption rate were highly significant as a straight line, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.185-190
• /
• 2005

Safe, economical and environment-friendly tunnel construction are required again along with social continuous development, the importance of waterproof work that is portion that actually all of user and builder can find that is embossed by tunnel construction's one of important construction. Also, ECB (Ethylen Copolymer Bitumen) sheet that is used in existing tunnel waterproofing method (ECB waterproofing method) being black because asphalt (Bitumen) is added, by purpose that make illumination of tunnel interior brightly and scar discovery eases in sheet with coating white film, but ECB that is used present according as ECB that asphalt is added does not satisfy high tensile strength of construction field, quality standard of extension. Also ECB denigrates color of black M/B that asphalt is excepted.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.1-6
• /
• 2004

We ensure a flat and regular basic surface by using part of joint waterproofing improved sheet method applying the upper slab of a concrete structure. We solve the problem of getting loose scale the general sheet by waterproofing of the sheet and improving adhesive strength of the basic concrete. Also, waterproofing sheet union to problem of joint have solved using of insertion type method so that, it improved a watertightness. It has improved in resist impact, resist abrasion and it is the effect of shortened construction period and cutting down on construction expenses. Here are the special quality and superiority of this waterproofing research. (1) Level material has the super adhesive strength so that it makes the basic surface without the gab of waterproofing sheet and waterproofing layer with the string adhesive strength. (2) We unite the sheet with the joining part between sheets by waterproofing sheet joint using of method. (3) There is the effect of shortened construction period and cutting down on construction expenses without waterproofing of protection.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.100-106
• /
• 2013

This paper deals with the design method for a small waterproof 4-axis robot arm. An extensive analysis was performed on the torque applied to the robot joint as a result of the payload, as well as the design of the joint actuator capacity. In addition, a study was undertaken on the design of a waterproof joint actuator that works at depths greater than 10 m and the wiring design for a small waterproof connector to avoid obstructing the robot motion. Finally, a finite element method simulation was carried out to analyze the strength of the designed robot arm link, and its stability was verified through a simulation test.