• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.164-170
• /
• 2002

Effect of the polymer-binder ratio and slag content on the properties of combined wet/dry-cured polymer-modified mortars using granulated blast-furnace slag are examined. Results shows that the flexural and compressive strengths of polymer-modified mortar using the slag tend to increase with increasing slag content, and reaches a maximum at a slag content of 40 ％, and is inclined to increase with increasing polymer-binder ratio. Water absorption, carbonation depth and chloride ion penetration depth tend to decrease with increasing polymer-binder ratio and slag content. Accordingly, the incorporation of slag into polymer-modified mortars at a slag content of 40％ is recommended for a combined wet/dry curing regardless of the types of polymer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.153-159
• /
• 2014

This research reviewed the joint and duration characteristics depending on the surface treatment condition and lap spliced length in the PET film jointing method using the high hardness liquid material. As a result, the corona discharge treatment was improved to the contact angle, joint tensile strength, and joint peel resistance compared to non-treatment. Particularly, a surface treatment E (Corona discharge + Primer + PU bond + Polyester fabric) turned out to the best, and especially when the lap spliced length is longer than 15mm, stable joint performance was secured under the long term deterioration treatment of 16 weeks. Thus, the joint is considered to be applicable as the water-proof material.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.68-75
• /
• 2018

The introduction of advanced water treatment facilities has increased as the conventional purification method cannot remove the substance clearly. However, the internal waterproofing and Anticorrosion materials of the advanced water treatment facility using ozone deteriorate due to the oxidation power of ozone and affects the concrete, which causes a decrease in durability. This study is to evaluate the ozone resistance according to the type of spray metal and the surface treatment method of the coating, and the bond strength after ozone treatment in order to develope a finishing method to prevent deterioration of concrete structure of water treatment facility using metal spraying method as a way to construct metal panel with excellent ozone resistance and chemical resistance by an easier way than the previous. The Experimental results show that spray metal Ti has superior ozone resistance even after spraying. It is considered to be the most suitable method for ozone resistance and bond performance by finishing using Teflon sealing as surface treatment method.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.51-57
• /
• 2011

The domestic wooden cultural properties applied to the sprinkler extinguishing system was confirmed extinguishing performance through fire experiments. Consists of wooden cultural properties of a fire, a flammable material is vulnerable in terms of. The scale of fire will occur to vary appearance of the initial fire in case of arson. Sprinkler nozzles of the characteristics, the discharging pressure is 1 bar and the flow rate is 80 lpm, applied in this experiment. Fire performance experiments were tested in two separated in each of the scale of the fire and cultural properties. Fire extinguishing performance test results was low in high ceilings and two or more units of the fire scale. Fire growth environment of the actual wooden cultural properties to experimental models when you consider that it is more vulnerable, sprinkler extinguishing system is required sufficient verification in order to apply fire protection of the wooden cultural properties.

• The Journal of Natural Sciences
• /
• v.6 no.1
• /
• pp.103-108
• /
• 1993

Zeolites were discovered as a natural mineral more than two hundred ago. In the beginning, the mineral was used as ion-exchange material and adsorbent. After the end of World War II , however, a variety of zeolites have become available in large amounts because of the establishment of low temperature synthesis and the discobery of natural zeolite deposits of sedimentary origin. Various uses of xeolite were developed utilizing the unique crystal strucrure and function of these minerals. In connection with this development remakable progress has also been made in basic stuides on the related geology and mineralogy, crystallization from sols and gels, structure, ion exchange, adsorption and cataiysis. As a result, zeolites, which had been known only as mineral specimens displayed in museums. established a firm position among the high-technology masterials with excellent functional capabilities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.584-592
• /
• 2022

In this paper, a study was conducted to improve self-healing and strength properties using sodium acetate. The developed inorganic-organic self-healing materials and recycled sodium acetate were manufactured to evaluate self-healing and permeability reduction properties. As a result of the experiment with recycled sodium acetate, the compressive strength of the material prepared with anhydrous and trihydrate at a ratio of 7:4 was higher than that of the mixture using anhydrous. It was confirmed that the compressive strength was improved by 3~7 %. In addition, the maximum permeability reduction rate was 92.6 %, which satisfied the self-healing properties.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.425-436
• /
• 2024

Modular apartment houses are a relatively new approach to public housing in South Korea. While promising in terms of efficiency and potential cost benefits, initial occupancy and maintenance data highlight areas for improvement in quality control. Analysis of defects reported during occupancy and maintenance stages revealed a high prevalence of issues with wallpaper and flooring. This suggests a need for stricter quality control measures during the production and installation of these building components. Furthermore, maintenance data identified shortcomings in the waterproofing methods employed for roofs, as well as in the design and construction management of connections between the low-rise concrete frames and the modular units themselves, including balconies. These findings point towards the importance of meticulous design and rigorous construction management practices to ensure the long-term durability of these critical building elements. Finally, the research suggests that unifying responsibility for construction management by awarding contracts for both the frame and the modular units to a single company could improve overall quality control. This approach could potentially mitigate issues arising from divided responsibility and streamline communication channels. By addressing these quality control concerns, modular construction has the potential to become a more widely adopted and successful method for delivering public housing in South Korea.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.62-74
• /
• 2015

Urban areas are variously under threat including deterioration of ecological functions. Many pond wetland types have been created as part of an effort to improve and restore this urban environment. This study was arranged to examine improvement plans of wetlands in urban areas by analyzing semi-natural wetlands in farm areas. As for environment for water quality, it suggested the inflow of natural water neighboring rivers or the direct inflow of rain as the improvement plans. The result which analyzed soil pH, OM, and T-N content of the soil environment mentioned that urban areas supplied artificial sluices, removed apoptotic bodies, and used artificial soil and waterproofing materials and use of natural materials in design and construction, the sluice state of the natural form, and negligence of autumn plants were suggested as the improvement plans. Florae appeared in the subject sites of the study have found that there are 35 families 69 species in urban areas and 53 families 142 species in rural areas. As the average has found that there are 18.5 families 29.3 species in 4 urban areas and 26.3 families 53.5 species in 4 rural areas, the big difference between them was analyzed. As the cause has found that there are differences in yearly plants in farming areas when compared to urban areas, creation of various basic environments including soil and water quality was suggested to make yearly plants settle down widely. Naturalized plants have found that there are no big differences between urban areas and rural areas. However, the average of the naturalized ratio in urban areas is 17.4% as the naturalized plants are about 1/4 of the appeared plants. As it was analyzed to be higher than 7.7%, the average of the naturalized ratio in farming areas as the big difference, creation of various inhabiting environments was suggested to make more yearly plants appear like the analyzed result of the life type. Consideration of placement, materials, and inhabiting environments was suggested to make creation of wetlands well appreciated to improve functions of wetlands in urban areas. It is expected that the above results of the study will be utilized in creation and improvement of the pond wetlands which can play a huge role in increase and improvement of biological diversity in urban areas.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.57-65
• /
• 1975

This study was carried out to examine the effect of manufacturing factors on physical properties of hardboard (S.I.S) made from the juvenile wood of sycamore (Platanus orientalis L.) The results obtained may be summarized as follows: 1. The difference among the yields of pulp treated with preheat time (defibrate condition) was significant in those of treatments. There was no difference in the yield of pulp treated with defibrate time. The yields of pulp on the tree age classes were shown the difference by 2<4<6<8 years. 2. The specific gravities of hardboard that were treated with hot pressing conditions showed us significantly in those of treatments. There was no difference on the specific gravities among hardboards, treated with resin and wax contents. But in all cases of the specific gravities satisfied the standard which specified the KS F 3203 (Hardboard) 3. The moisture contents of hardboard satisfied the standard which calls for 13-percent below. There were difference in moisture contents between hardboard, treated with preheating time, resin and wax contents and hot pressing conditions. And the moisture contents of hardboard on the tree age classes showed the difference by 2<4<6<8 years. 4. The water absorption and thickness swelling of hardboard treated with defibrations, resin and wax contents, and hot pressing conditions were significant in those of treatments. And the water absorption and thickness swelling of hardboard on the tree age classes showed us the significant difference by 8<6<4<2 years. 5. The difference among the flexural strength in using tested three conditions showed us the difference by defibration$200kg/cm^2$) of hardboard, it is likely to be recommened that the juvenile wood of sycamore is valuable for the raw materials of hardboards.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.380-391
• /
• 2014

Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.