• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.87-95
• /
• 2021

In this study, seven companies(A~G) designated as new construction technology selected and evaluated KS F 2622: Method of test for performance evaluation of membrane roofing systems that are similar to field application conditions. As a result of the test, it was confirmed that although all test specimens exceeded KS standards in the basic physical, it was difficult to obtain field quality performance in weak areas such as joints and vertical parts of the adhesive coating method in water-tightness, sagging resistance, swelling resistance tests except for fatigue(crack behavior) tests.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.322-324
• /
• 1996

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.128-134
• /
• 2005

Up to now, the various water proofing methods and materials have been developed. For the water proofing methods, poly-urethane membrane method is one of the commonly used and increase market share in water proofing industry due to it's many advantages. However, in spite of it's many advantages over other water proofing methods, water proofing defect occurs frequently. With this respect, the study investigate water proofing defect causes in roof water proofing. The study investigate 13 water proofing construction site in Sunchon city in oder to find urethane membrane defection causes and their type. As a results of the study, the followings are founded. 1) Among various water proofing defection causes, problems of water remain phenomenon due to surface horizontal level defect which occupy $25\;\%$ of total defect causes is the most commonly occur. 2) The second defect cause which occupy $15\;\%$ of total defect causes is the swell up phenomenon due to surface dry problem. For the prevention of water proofing defection in roof using urethane membrane, the followings are recommended. 1) Faultless surface treatment before using urethane membrane 2) Develop improved urethane membrane material 3) Improve urethane membrane construction technique

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.22-33
• /
• 2005

Four sheet-shaped and one soft-shaped self-sealing waterproof materials were prepared to recycle some GRT(Ground Rubber Tires). Their physical properties were tested to consider characteristics of them. The self-sealing waterproof materials were consisted of GRT/super absorbent polymer(SAP)/binder and mold by a hot press after mixing with a batch-typed internal mixer. The average size of GRT particles was -40 mesh, SAPs were commercial GE-500F and poly(AM-SAS-AA) prepared in this work. Binders were PU. EVA, LDPE, SBR, and poly(2-EHA). And PU film was attached to improve the properties of waterproof materials. Characteristics of self-sealing waterproof materials consisted of by GRT/GE-500F/EV-600/PU film and GRT/GE-500F/SBR(vulcanization)/PU film among the developed self-sealing waterproof materials were similar to the commercial products. And properties of the soft-shaped self-sealing waterproof materials consisted of by GRT/GE-500F/Po1y(2-EHA) and CRT/Poly(AM-SAS-AA)/poly(2-EHA) were improved within from four times to twenty times compared to the one oi the commercial products.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.138-144
• /
• 1996

At present, waterproof is absolutely needed to minimize the carbonation of bridge decks in Kor ea. In this research indoor experiments for penetrative waterproof admixture out of available methods are carried out to evaluate the resisting characteristics against natural arid artificial car bona ting conditions. The test results show that the optimal time of waterproof is 14 days after the concrete construc. tion but reconsideration is necessary for the application to high strength concrete because of the reduction in penetration of waterproof admixture. The results also show that the penetrat ive waterproof admixture has srrong resistance to the acid rain. However the waterproof capability of the admixture is not permanent especially under the natural exposure. Therefore the slab of a bridge should be paved with asphalt concrete. Other noticeable effects are the increase of heat and abrasion resistances from the use of the waterproof agents.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1994.03a
• /
• pp.12-23
• /
• 1994

터널의 방수형식은 배수형(Wet System)과 방수형(Dry System)으로 대별된다. 배수형은 터널의 아치부와 측벽부에만 방수막을 설치하고 이의 배면과 바닥으로부터 유입되는 지하수를 배수공을 통하여 배수처리하는 방식이며 경제성과 시공성이 우수하여 대부분의 도로 터널 및 지하철 등에 적용되어 왔다. 방수형은 터널의 주변장 전체를 방수시공하여 터널내로 유입되는 지하수를 완전히 차단하는 방법으로서, 이러한 방수형 터널은 경제성과 시공성은 불리하나, 지하수위 저하에 따른 압밀침하나 생태계 파괴 방지, 터널의 장기적 환경보전 및 운영유지비 감소 등의 이유로 최근 상당수의 도심지 지하철 터널에 계획되어 시공중에 있다. (중략)

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.202-212
• /
• 2005

배수식 방수방식으로 지하 30m에 건설된 NATM터널 통신구를 준공 7년후 완전방수식 방식으로 변경하였다. 터널 라이닝에 30m의 수압을 작용할 경우 발생하는 단면력을 구조검토하고 배근상태가 안전한가 분석하였다. 또한 라이닝의 시공단면을 확인하기 위하여 충격반향기법(Impact-Echo Method)탐사와 GPR탐사, 배근상태를 파악하기 위하여 철근탐지기를 사용하였다. 그 결과 30m 수압에 안전할 것이라는 판단하에 배면주입 방수공법을 적용 통신구를 완전방수 하였다. 그리고 배수식 통신구를 운용하는 비용과 완전방수공사비를 분석한 결과 배출되는 지하수량이 많은 경우 완전방수시공이 경제성이 있다고 분석되었다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.37-47
• /
• 1993

최근에 치명적인 바이러스, 특히 에이즈를 이르키는 Human Immunodificiency Virus (HIV), 또는 간에 심각한 병을 이르키는 Hepatitis B Virus (HBV)와 같은 무서운 바이러스가 환자의 피나 분비물을 통하여 의사에게 전염되는 사례가 늘어감에 따라 이제는 환자의 피나 분비물의 침투를 막기 위해 방수성과 방균성을 가진 수술복 착용이 절대적으로 필요하게 되었다. 따라서 본 연구의 목적은 1. 수술가운을 만드는 5가지 대표적인 직물의 방수성과 방균성을 측정하고 2. 세탁시 표백제의 사용유무가 그 직물의 방수성과 방균성에 미치는 영향을 알아보고 3. 반복세탁이 그 직물의 방수성과 방균성에 미치는 영향을 알아 보는데 있다. 이 실험을 위해 3가지 재사용 수술가운과 (Gore-tex$^R$, membrane reinforced; Compel$^{TM}$, fabric reinforced; Acep$^{TM}$, non-reinforced) 두 가지 일회용 가운 (Evolution$^R$ gown, fabric reinforced; Evolution$^R$ Specialty, film reinforced)이 사용되었다. 표백제를 사용한 세탁이 직물의 방수성과 방균성에 미치는 영향을 알아보기 위해 재사용 가운을 세탁, 건조, 살균을 하였다. 세탁과 살균의 빈도수는 1, 20, 40, 50, 60, 70, 80번 이였다. 방수성 측정방법으로 1. Impact Penetration test (AATCC 42-1985), 2. Elbow Lean test, 3. Synthetic Blood Resistance test (ASTM F 23. 40. 01)가 사용되었고 방균성 측정방법으로 Viral Resistance test (ASTM F 23. 40. 02)가 사용되었다. 실험 결과는 다음과 같다. 1. Gore-Tex$^R$ 가운과 Evolution$^R$ Specialty 가운은 방수성과 방균성의 성질을 가졌다. 그러나 표백제를 사용하여 70번 세탁한 Gore-Tex$^R$ 가운은 membrane의 구조가 파괴되어서 방균성을 상실했다. 2. Evolution$^R$ 가운, Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 오직 Impact Penetration test만 통과했다. 즉 이 직물들은 큰 압력의 가함이 없는 splash resistance만 가지고있다. 그러나 Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 20번과 60번 세탁 후 각각 그들의 splash resistance 마져도 상실했다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.59-66
• /
• 2014

Insulation of rooftop is one of the major performance to energy-saving construction. Further, waterproofing performance is also important. For such a reason, it is need to develop waterproofing method containing thermal insulation property. This study was wanted to evaluate thermal insulation performance about the composite waterproofing method of thermal supplement type that is developed recently. As a result of waterproofing performance test, every test item was showed over the performance standards of KS (Korean (Industrial) Standards). And the result of thermal insulation performance test, the highest temperature in the styrofoam box was $25.91^{\circ}C$, the bubble sheet box was $17.28^{\circ}C$, the insulation sheet box was $15.47^{\circ}C$ and the waterproofing sheet box of thermal supplement type was $24.11^{\circ}C$. In observations of thermal bridges of sheet's joint, thermal bridges was not identified at the sheet's joint. As a result, composite waterproofing method of thermal supplement type is interpreted to have thermal insulation performance.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.593-604
• /
• 2021

In this study, a comparative test was conducted on a specially developed elastic waterproof paint and general water-based paint for the purpose of responding to cracks occurring on the outer wall of concrete structures and improving watertightness. Through the comparative experiment, it was confirmed that the watertightness could be improved by securing the crack shielding property, and it was also confirmed that about 10 times more crack responsiveness was secured compared to general water-based paint. In addition, it was confirmed that the adhesion performance of at least 1.3MPa and resistance to a water permeation pressure of 0.1MPa were possible, confirming that stability was secured from a waterproofing perspective.