• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.334-335
• /
• 2004

It is important that the contaminated air is not revealed to the outside of the facility. The inside of the facility should be classified into several zones according to the radioactivity and each zone should maintain tile differential negative pressure between the zones also. It is not easy to equilibrate the pressure during the operation. On the normal operation, the clogging of the HEPA filter and the opening of the doors/shutters influence very much. We could maintain the differential negative pressure between the zones by the constant watching and periodical replacement of the filters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.82-87
• /
• 2012

Research and development of the spinning system which become bigger, faster and more detailed has been making progress continuously due to the increasing use of yarn which is considered as raw material to make industrial goods such as tire cord, air bag, filter, seatbelt and fiber-optic cable along with a remarkable growth of industry. In this paper, the desirable procedure and design requirements concerning a method of vibration reduction for "Godet Roller" considered as the main source of high vibration in the spinning system were suggested, and then verified those by analysis and actual test.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.103-104
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.59-60
• /
• 2008

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.61-64
• /
• 2014

Radioactive materials are in use and have many applications from the generation of electricity to the purposes of research, industry and medicine such as diagnosis and therapy. In the course of their use some of radioactive substances may be discharged into the environment from facilities using the unsealed radioactive materials, which are main artificial sources occurring the public exposure. Discharges are in the form of gases, particles or liquids. This paper provides procedures to estimate the level of the public exposure based on the conservative assumptions and simple calculations in the facility using unsealed liquid sources. They consist of two processes; (1) to calculate maximum concentration of gaseous effluents discharged through the exhaust pipe and average concentration of liquid effluents discharged through the drain of the storage tank, (2) to compare each of them to numerical guidances for the discharges of radioactive gaseous and liquid effluents mentioned in the related notification. For this purpose followings are assumed properly; daily usage, form and dispersion rate of radionuclides, daily amount of radioactive liquid waste and exhaust and drainage equipment. The procedures are readily applicable to evaluate environmental effects by planned effluent discharges from facilities using the unsealed radioactive materials. In addition they may be utilized to obtain practical requirements for radiation safety control necessary for the reductions of the public exposure.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.243-244
• /
• 2004

금속성 방사성폐기물을 제염하는 설비의 조건으로는 제염계수, 2차 폐기물 발생량, 모재의 회수가능성, 작업자의 안전성(원격조정) 등을 고려하여야 한다. 금속성 방사성폐기물의 오염제거 방법으로 습식제염 방법을 손쉽게 생각할 수 있으나 습식제염은 모재로부터 오염 물질을 선택적으로 제염이 불가능하고 강산 용액을 사용하므로 제염후 발생되는 2차 액체폐기물로 인해 최근 그 적용이 제한되고 있다.(중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.373-374
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.127-128
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.325-326
• /
• 2007

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.127-128
• /
• 2010