• Journal of Radiation Protection and Research
• /
• v.17 no.2
• /
• pp.37-48
• /
• 1992

It was carried out to analyze the nuclear energy deposition rates for the bulk shield components including materials of the primary end shield and side primary systems of Wolsong 2 during steady state operations at 100% full power using ANISN code. This paper has been prepared to support system design of Wolsong 2.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.39-44
• /
• 2005

A new developing reactor isn't fixed the structure and the materials of reactor components. To perform the shielding analysis for a reactor vessel by $R-\theta$ geometry, it takes much effort and time to modeling of source term according to the change of reactor components every time. Therefore, we developed the shielding analysis system for the reactor vessel by $R-{\theta}$ geometry, which wasn't affected by the reactor core geometry. By using the developed shielding analysis system, we performed the shielding analysis for the reactor vessel of an integral reactor which has the hexagonal geometry of nuclear fuel assemblies in reactor core. We compared the results obtained from the developed system with those obtained from MCNP analysis. Because the results of developed shielding analysis system were more conservative than those of MCNP calculation, it is useful for shielding analysis. As we had developed the new shielding analysis system for a reactor vessel by $R-{\theta}$ geometry, we reduced error of model for reactor core which was formerly designed by hand and saved the time and the effort to design source term model of reactor core.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.302-302
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.310.2-310
• /
• 2002

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.80-90
• /
• 1993

Radiation streaming through penetrations has been of great concern in radiation shielding design and analysis. This study developed a Monte Carlo method and constructed a data library of results calculated by the Monte Carlo method for radiation streaming through a straight cylindrical duct in concrete walls of a broad, mono-directional, mono-energetic gamma-ray beam of unit intensity. It was demonstrated that average dose rate due to an isotropic point source at arbitrary positions can be well approximated using the library with acceptable error. Thus, the library can be used for efficient analysis of radiation streaming due to arbitrary distributions of gamma-ray sources.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.1038-1048
• /
• 2010

Radiation exposures of an astronaut during the space travels to the International Space Station(ISS) of the Soyuz and the Moon of the Apollo, were calculated considering the altitude, boarding time, period of stay, kinds of spaceships and space suits. The calculated radiation exposures decrease dramatically according to the thickness of the shielding by the wall of the spaceships and by the space suits. For the space travel to the ISS of Soyuz at Low Earth orbit, the thickness of the spaceship required to optimally reduce the radiation exposure is 3 cm. For the Extravehicle Mobility Unit(EMU) the exposures are minimized at 4 cm of the aluminized Mylar and 5 cm of the Demron, respectively. The aluminized Mylar showed better radiation shielding than the Demron which contains the high Z materials. The radiation exposures of an astronaut were $4.2\times10^{-6}$ Sv for the ISS travel and $4.3\times10^{-5}$ Sv for the Moon explore. The high concentration of the high energy proton flux at the surface of the Moon results in high radiation exposure. The calculation scheme and results of this study can be used in the design of the shielding performance of a spaceship and space suits.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.457-463
• /
• 2005

KHNP(Korea Hydro and Nuclear Power Ltd., Co.) is developing a HIC transport package which is satisfying domestic and IAEA regulations and NETEC(Nuclear Environment Technology Institute) is conducting a conceptual design. In this study, the shielding thickness was calculated using the data from radionuclide assay program which is currently using in nuclear sites and Micro Shield code. Considering the structural safety, carbon steel was chosen as shielding material and the shielding thickness was calculated for 500 R/hr and 100 R/hr at HIC surface, respectively. Through the shielding analysis, it was evaluated that the regulation limit is satisfied when the shielding thickness is 22 cm for 500 R/hr and 17 cm for 100/hr.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.51-62
• /
• 1993

A computational program ［TDET］ of the particle transport equation is developed on radiation shielding problem in two-dimensional cartesian geometry based on the discrete element method. Not like the ordinary discrete ordinates method, the quadrature set of angles is not fixed but steered by the spatially dependent angular fluxes. The angular dependence of the scattering source term in the particle transport equation is described by series expansion in spherical harmonics, and the energy dependence of the particles is considered as well. Three different benchmark tests are made for verification of TDET : For the ray effect analysis on a square absorber with a flat isotropic source, the results of TDET calculation are quite well conformed to those of MORSE-CG calculation while TDET ameliorates the ray effect more effectively than S$_{N}$ calculation. In the analysis of the streaming leakage through a narrow vacuum duct in a shield, TDET shows conspicuous and remarkable results of streaming leakage through the duct as well as MORSE-CG does, and quite better than S$_{N}$ calculation. In a realistic reactor shielding situation which treats in two cases of the isotropic scattering and of linearly anisotropic scattering with two groups of energy, TDET calculations show local ray effect between neighboring meshes compared with S$_{N}$ calculations in which the ray effect extends broadly over several meshes.eshes.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.447-452
• /
• 1996

본 연구에서는 7개의 PWR 사용후핵연료집합체를 운반할 수 있는 KSC-7 수송용기의 건식수송조건에 대한 열적 건전성을 평가하였다. 수송용기 축소모델을 제작하여 열시험을 수행하였고 또한, 시험조건과 동일한 조건으로 열전달해석을 수행하여 두가지 결과를 비교 분석함으로써 시험 및 해석결과에 대한 신뢰성을 검증하였다. 신뢰성이 검증된 해석방법을 이용하여 수송용기 본체 및 핵연료집합체에 대한 열전달해석을 수행함으로써 방사선차폐체 및 핵연료봉에 대한 열적 건전성을 입증하였다. 또한, 수송용기의 온도상승에 따른 구조적 건전성을 평가하기 위한 열응력해석을 수행하였다.

• Journal of Radiation Protection and Research
• /
• v.14 no.1
• /
• pp.46-55
• /
• 1989

Neutron shielding for a spent fuel container was analized using the Monte Carlo code MCNP coupled with discrete ordinates codes, XSDRN and ONEDANT. The ORIGEN-S code was used to determine the fixed neutron source, and the spectral source information for MCNP were obtained from a 10 group XSDRN calculation and a 27 group ONEDANT calculation. When the depleted uranium shield was used, the results from ONEDANT and XSDRN calculations agreed with the MCNP results within 10% and 20%, respectively. Depleted uranium appears more effective than lead or steel as a neutron shield.