• Journal of The Korean Radiological Technologist Association
• /
• v.29 no.1
• /
• pp.262-262
• /
• 2003

• Journal of The Korean Radiological Technologist Association
• /
• v.29 no.1
• /
• pp.209-209
• /
• 2003

• Radioisotope journal
• /
• v.7 no.2
• /
• pp.30-37
• /
• 1992

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.103-109
• /
• 1996

고리 원자력 1호기 14주기(‘95년도) 운전기간 중 증기발생기 세관 열전달 용량 저하로 전출력 운전 기간동안 정격출력보다 15% 감발 운전한 경험이 있었는데, 이 기간중 냉각재내 방사성 부식생성물(CRUD) 농도가 약 80% 감소됨을 발견하였다. 이때 출력감소 비율보다 많은 CRUD 감소현상 규명을 위해 냉각재 수질관리인자와 EPRI 피복재 부식모델인 PFCC코드를 사용한 피 복재 산화물 두께변화 등을 비교한 결과, 운전중 용출되는 방사성 부식생성물은 핵연료 표면의 피복재 산화물에 흡착된 Co핵종이 피복재 산화물 이탈시 함께 거동하는 것으로 확인되었으며, 피복재 산화물 이탈은 산화막 두께 및 열유속에 주로 의존함이 밝혀졌다. 따라서 냉각재내에서 방사성 부식 생성물의 생성률 저감을 위해서는 정상운전시 핵연료 표면의 산화막 증가를 억제할 수 있는 수질 조건을 도출하고 그에따른 운전을 통해 원전 작업자의 방사선 피폭량 저감 및 방사성폐기물의 발생을 줄일 수 있을 것으로 여겨진다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.77-86
• /
• 2002

위성은 일단 한 번 발사하고 나면 운용궤도상에서 수리 및 회수가 거의 불가능하기 때문에 위성에 들어가는 모든 개발 부품들은 완벽한 설계, 충분한 해석, 고 작업도의 제작, 그리고 다양한 시험이 반드시 수반되어야 한다. 위성시스템에서 전자 소자의 신뢰성에 영향을 주는 인자는 다양하다. 과도한 열은 전자소자의 실패를 유발해서 결과적으로는 전체 위성의 실패를 유도할 수 있다. 이 논문에서는 다목적 실용위성 2호의 고전력 소산 전장품의 열부하 완화를 위한 방안을 경우별로 연구 비교하였다. 고전력 소산 전장품의 열부하를 완화하기 위해서는 하우징 두께의 증가가 필요하며, 전력조절기의 다이오드나 트랜지스터처럼 전력소산이 큰 소자에 대해서는 장착위치를 변경하거나 장착 부분의 열전도율을 증가시키는 방법이 필요하다. 또한 전력조절기처럼 장착면이 좁은 경우에는 복사의 영향이 크며, 이러한 전장품의 열부하를 완화하기 위해서는 주위 벽면의 온도를 낮추거나 하우징 표면 방사율을 증가시키는 방법이 효과적임이 알 수 있다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.339-347
• /
• 2005

A type IP-2 transport package should prevent a loss or dispersal of the radioactive contents and a more than $20\%$ increase in the maximum radiation level at any external surface of the package when it were subjected to the drop test under the normal conditions of transport. If a shielding thickness of IP-2 transport package is thick, a bolted lid type may prevent a loss or dispersal of the radioactive contents than the door type of ISO containers which are generally used as a type IP-2 transport package. In this paper, to evaluate the effect of drop directions on the bolt tension and the coherence of a bolt, the drop tests of preliminary small model are tested and evaluated for seven directions before the drop test of a type IP-2 transport package with a bolted lid type under the normal conditions of transport. Seven drop directions which are a bottom-vertical drop, a lid-vortical drop. a horizontal drop and four corner drops have been carried out. Using a force sensor, the bolt tension during the drop impact is measured. The coherence of bolt is evaluated by the difference between the fastening torque of bolt before a drop test and the unfastening torque of bolt after a drop impact.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.518-525
• /
• 2011

In this study, the natural ventilation pressure resulting from the large altitude difference which is a characteristic of high radioactive waste repository and the caloric value of the heat emitted by wastes was calculated and based on the results, natural ventilation quantities were calculated. A high radioactive waste repository can be considered as being operated through closed cycle thermodynamic processes similar to those of thermal engines. The heat produced by the heating of high radioactive wastes in the underground repository is added to the surrounding air, and the air goes up through the upcast vertical shaft due to the added heat while working on its surroundings. Part of the heat added by the work done by the air can be temporarily changed into mechanical energy to promote the air flow. Therefore, if a sustained and powerful heat source exists in the repository, the heat source will naturally enable continued cyclic flows of air. Based on this assumption, the quantity of natural ventilation made during the disposal of high radioactive wastes in a deep geological layer was mathematically calculated and based on the results, natural ventilation pressure of $74{\sim}183$Pa made by the stack effect was identified along with the resultant natural ventilation quantity of $92.5{\sim}147.7m^3/s$. The result of an analysis by CFD was $82{\sim}143m^3/s$ which was very similar to the results obtained by the mathematical method.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.434-439
• /
• 2012

To improve the performance of ionic polymer-metal composite (IPMC) actuators, Nafion films sandwiched with Nafion/conducting nanoparticulate electrospun webs were used as polymer electrolytes of IPMC. Multiwalled carbon nanotube (MWNT) and silver were the conducting nanoparticulates and the nanoparticles dispersed in a Nafion solution were electrospun. IPMCs with the Nafion/conducting nanoparticulate electrospun webs displayed improved displacements, response rates, and blocking forces. MWNT was superior to silver in terms of displacement and blocking force, and the webs without the conducting fillers also caused enhanced performances compared with the conventional IPMCs. These improvements were attributed to an elevated electrolyte flux through highly porous interlayers and capacitance induced by well dispersed conducting fillers, and low interfacial resistance between electrolyte and electrodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1242-1250
• /
• 2008

In this paper, we predicted the radiation field strength from the low power radio devices to force the radio interference on the AMPS receiver. The predicted value of 79.13[$dB{\mu}V/m$] is the upper value of radiation against the intermodulation interference emanated from the low power radio devices. To show the validity of the suggested values theoretical analysis on intermodulation and modeling of the AMPS receiver are performed, and also measurements on the AMPS receiver IC are carried out. The resultant numerals show the good match between them within the allowable tolerances.

• The Korean Journal of Nuclear Medicine
• /
• v.9 no.2
• /
• pp.47-54
• /
• 1975

난포자극호르몬(HFSH)을 클로라민 티를 사용하여 방사성요오드로 표지하였으며 평균 표지수율은 대략 65%이었다. 표지호르몬을 방사면역측정용으로 사용하기 위하여 전분젤 전기영동과 젤여과법으로 분리정제하고 그 분리정제효과를 분석한 결과 젤 여과법이 분리시간, 간편성, 항체와의 결합력 등으로 보아 우수함을 알 수 있었다. 한편 유리표지호르몬과 항체와 결합한 표지호르몬의 비율를 결정하기 위하여 이중항체법을 크로마토전기영동법과 비교하여 본 결과 이중항체법에 의해서만 효과적 비율결정이 가능하였다.