• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.169-170
• /
• 2003

최근에 전기방사를 이용한 서브마이크로(submicro) 직경을 가진 섬유로 구성된 부직포 제조에 대한 관심이 집중 되어져 왔다[1,2]. 그러나 지금까지 전기방사기술에 대한 활발한 연구에도 불구하고, 전기방사를 이용하여 필라멘트를 제조한 결과는 보고되지 않았다. 본 실험에서는 전기방사 공정을 기초로 한 복합적인 방사체계를 이용하여 다공성 필라멘트를 제조하고자 한다. (중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.130-131
• /
• 2006

하나로에서의 방사성폐기물은 작업공정 특성상 원자로 정기점검(overhaul)시 주로 발생된다. 이에 방사성 폐기물의 발생을 최소화 하고, 규제해제대상 폐기물의 지정 및 분류를 해야 한다. 본 논문에서는 방사성 폐기물의 종류 및 특성을 고려하여 작업절차의 개선, 저감화 대책 및 이를 적용한 실적을 소개하고자 한다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.337-344
• /
• 2003

In this study, the maintenance process by the servo manipulator for the parts of the equipment that cannot be reached by MSM in the hot cell was developed. To do this, the virtual mock up is implemented using virtual prototyping technology. And, Using this mock-up, the workspace of the manipulators In the hot cell and the operator's view through the wall-mounted lead glass are analyzed. And the path planning of the servo manipulator using the collision detection of the virtual mockup is established. Also, the maintenance process for the parts of the equipment that are located out area of the MSM's workspace by the servo manipulator is proposed and verified through the graphic simulation. The proposed remote maintenance process of the equipment can be effectively used in the real hot cell operation. Also, the implemented virtual mock-up of the hot cell can be effectively used in analyzing the various hot cell operation and in enhancing the reliability and safety of the spent fuel management.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.360-366
• /
• 2002

The electrospinning of polyacrylonitrile dissolved in N,N-dimethyl formamide (DMF) successfully produced nano-scale fibers. The processing parameters such as charged voltage, velocity of collected roller, and tip-to-collector distance (TCD) , affected the ultimate fiber size. At TCD of 5 cm, the average tiber diameter increased with increasing charged voltage because of the more aggregation between fibers due to the remaining DMF solvent on the fiber surface. But, at TCD of 9 cm, the average fiber diameter decreased as the charged voltage was increased because of complete evaporation of DMF. Also, the fiber diameter decreased with increasing the velocity of collected roller. Cross direction width (CWD) of nonwoven mat increased with decreasing the charged voltage and with increasing TCD.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.177-178
• /
• 2007

플라즈마 공정은 집적회로 제작을 위한 미세 박막의 증착과 패턴닝에 핵심적으로 이용되고 있다. 본 연구에서는 플라즈마공정감시와 제어에 응용될 수 있는 모델을 제안한다. 본 모델은 광방사분광기 (Optical emission spectroscopy-OES)정보와 역전파 신경망을 이용해서 개발하였다. 제안된 기법은 Oxide 식각공정에서 수집한 데이터에 적용하였으며, 체계적인 모델링을 위해 공정데이터는 통계적 실험계획법을 적용하여 수집되었다. Raw OES 정보대신, Actinometric OES 정보를 이용하였으며, 신경망의 예측성능은 유전자 알고리즘을 이용해서 증진시켰다. OES의 차수를 줄이기 위해 주인자 분석 (Principal Component Analysis-PCA)을 세 종류의 분산(100, 99, 98%)에 대해서 적용하였다. 최적화한 모델의 예측에러는 323 $\AA/min$이었다. 이전에 PCA를 적용하고 은닉층 뉴런의 함수로 최적화한 모델의 예측에러는 570 $\AA/min$이었으며, 개발된 모델은 이에 비해 43% 증진된 예측 성능을 보이고 있다.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.334-339
• /
• 2008

Recently electro spinning is a widely used simple technique to prepared micro- to nanometer-sized fiber of various polymers. In general, a normal multiple-nozzle electro spinning system has been difficult to achieve high production-rate fabricating micro/nanofibers due to the interference of electric field between individual nozzles in the process. To reduce the interference effect of electric field between nozzles, we developed a multi-nozzle electrospinning system supplemented with auxiliary electrodes. Poly($\varepsilon$-carprolactone)(PCL), which has good mechanical property and biocompatibility, was electrospun by the multi-nozzle electro spinning system. Electrospinnability, product rate, and size uniformity of spun fibers for the system with and without auxiliary electrodes were characterized. As a result, the multi-nozzle electrospinning system supplemented with auxiliary electrodes provides excellently stable processability and showed high mass productivity of PCL-nanofibers relative to a normal multi-nozzle electro spinning system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.213-220
• /
• 2007

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter). At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide in the pipe cooler has been numerically modeled and scrutinized. Finally, flow pattern in accordance with the location of off-gas entrance of the HTF has been compared.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.249-254
• /
• 2016

In this study, we investigated the main characteristics of off-gas generated from melting process and off-gas treatment system operation example to provide some primary data for commercial vitrification facility design. The purpose of vitrification facility operation is to treat hazardous materials in the radioactive wastes and harmful off-gas containing a variety of chemical species generated in the glass melting process. Constructing and operating vitrification facility essentially need to be licensed through safety analysis; it is very important to treat radionuclide and hazardous materials below the legal environment emissions regulation level. We must accurately understand the characteristics of off-gas and apply an appropriate off-gas treatment process accordingly. Thus, to design the appropriate off-gas treatment there must be a wide range of elements taken into account such as characteristics of waste and melter, regulation guidance of off-gas, characteristics of generated off-gas and off-gas treatment system performance assessment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.69-78
• /
• 2005

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter) At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide In the pipe tooler has been numerically modeled and scrutinized. Finally, flow pattern In accordance with the location of off-gas entrance of the HTF has been compared.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.328-328
• /
• 2002

PET 絲의 특성은 중합단계나 방사, 연신 등의 원사제조공정의 공정조건뿐 아니라 사가공 공정을 거쳐 winding, 2-for-1 twisting, sizing등의 제직준비 공정과 제직 공정에 의해서 물리적인 특성이 크게 변화한다. 이러한 공정을 거치면서 품질과 성능변화에 절대적인 영향을 미치는 공정요소는 온도, 시간 그리고 장력이다(37). PET 絲는 공정을 거치면서 역학적 특성이나 열적 특성의 차이로 인해 공정관리 면에서 middle stream의 중소기업들이 시행착오에 의해 공정조건을 결정하는 현실에 처해있다. (중략)