• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.63-74
• /
• 2006

It's essential to meet the expectations of drivers through reasonable road design, which makes the drivers to recognize the conditions of road sufficiently. In this case, we could say that because the roads are consistently designed, drivers can make a safe and comfortable drive. There are so many studies about the alignment design consistency methods which are previously mentioned. In this study, Firstly we categorize the studies which are concerned with the estimation of the alignment design consistency methods and then apply the method which fits for the actual condition into the practice. And we'll make a realistic method by using the data which aye collected from the National Road. The developed model in this study is the predicting model including speed($V_t$) as the variable on the upper stream 100m of the curve. This model was developed which divided to two cases in the all directions of two lanes; One case is the $R{\leq}200m$ and another case is the R>200m. In the section of the $R{\leq}200m$, this case was influenced on the road alignment(R) and($V_t$) and another section was found that is affected to the speed($V_t$) on the upper stream loom rather than the effect of road alignment(R). In the case of all directions of four lanes, however, this study is predicted divided to two sections on the 400m of R, these section have more influenced to($V_t$) than the road alignment factors. This result of the four lanes was represented to different result with the two lanes. This study will further need development of the predicting model with the higher confidence through collecting data with more the exact data, the various road alignment data and speed of the several sections on the upper stream on the curve.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.3
• /
• pp.315-323
• /
• 2000

Background : An immunochromatographic assay (ICT Diagnostics) which facilitates the diagnosis of tuberculosis(TB) by detecting serum antibodies mainly directed against specific 38KDa of Mycobacterium tuberculosis has come into the market. The test consists of a cardboard folding device containing nitrocellulose strip and absorbent pads. The whole procedure is completed within 15 min and does not require any additional equipment. The test has been reported to be sensitive and specific in diagnosing active TB. Thus the test had been evaluated with sera from TB patients and TB-free subjects. Method : Sera from patients with active pulmonary tuberculosis(40 sputum positives for Mycobacterium tuberculosis, 79 sputum negatives, and 3 extrapulmonary tuberculosis) were obtained from the Double-Cross Chest Clinic of the Korean National Tuberculosis Association (KNTA) in Seoul. The control group consisted of TB-free 68 subjects(21 children under 7 years old and 47 healthy staff members of KNTA). Results : Nine out of 68(13.2%) TB-free controls had positive antibody response. Total 106 of 122(86.9%) radiologically active patients had positive antibodies while 16 (13.1%) showed negative reaction. Antibody was detected in 38 of 40(95.0%) sputum positive patients and 68 of 82(82.9%) sputum negative patients who were under the antituberculosis chemotherapy. The sensitivity and specificity were all 87% and the positive predictive value was 92.2% while the negative predictive value was 78.7%, when the prevalence of TB in the sample was 64.2%. Our results clearly show that the detection of antibodies which mainly react with the 38KDa antigen of M. tuberculosis is not suitable as the first-line method of diagnosis but considered only as an adjunctive test to standard techniques of tuberculosis diagnosis. when considering its high false positivity.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.41-54
• /
• 2022

The purpose of this study was to propose a "user experience (UX)-centered product development process" so that the product design development process using the service design process can be systematized and used in practice. In a situation in which usability research on office phones is lacking compared to general home phones, this study expands to a product-based service design point of view rather than simple product development, intending to research ways to provide user experience value through office phone design in smart office. This study focused on extracting UX-centered user needs using the service design process and developing product design that realizes user experience value. In particular, the service design process was applied to systematically extract user needs and experience value elements in the product development process and to discover ideas that were converged with product-based services. For this purpose, the "Double Diamond Design Process Model," which is widely used in the service design field, was adopted. In addition, a product design development process was established so that usability improvement plans, user experience value elements, and product-service connected ideas could be extracted through a work-flow in which real users and people from various fields participate. Based on the double diamond design process, in the "Discover" information collection stage, design trends were identified mainly in the office phone markets. In the "Define" analysis and extraction stage, user needs were analyzed through user observation, interview, and usability survey, and design requirements and user experience issues were extracted. Persona was set through user type analysis, and user scenarios were presented. In the "Develop" development stage, ideation workshops and concept renderings were conducted to embody the design, and people from various fields within the company participated to set the design direction reflecting design preference and usability improvement plans. In the "Deliver" improvement/prototype development/evaluation stage, a working mock-up of a design prototype was produced and design and usability evaluation were conducted through consultation with external design experts. It is meaningful that it established a "UX-centered product development process" model that converged with the existing product design development process and service design process. Ultimately, service design-based product design development process was presented so that I Corp.'s products could realize user experience value through service convergence.

• Radiation Oncology Journal
• /
• v.27 no.2
• /
• pp.91-102
• /
• 2009

Purpose: To compare the accuracy and efficacy of EDR2 film, a 2D ionization chamber array (MatriXX) and an amorphous silicon electronic portal imaging device (EPID) in the pre-treatment QA of IMRT. Materials and Methods: Fluence patterns, shaped as a wedge with 10 steps (segments) by a multi-leaf collimator (MLC), of reference and test IMRT fields were measured using EDR2 film, the MatriXX, and EPID. Test fields were designed to simulate leaf positioning errors. The absolute dose at a point in each step of the reference fields was measured in a water phantom with an ionization chamber and was compared to the dose obtained with the use of EDR2 film, the MatriXX and EPID. For qualitative analysis, all measured fluence patterns of both reference and test fields were compared with calculated dose maps from a radiation treatment planning system (Pinnacle, Philips, USA) using profiles and $\gamma$ evaluation with 3%/3 mm and 2%/2 mm criteria. By measurement of the time to perform QA, we compared the workload of EDR2 film, the MatriXX and EPID. Results: The percent absolute dose difference between the measured and ionization chamber dose was within 1% for the EPID, 2% for the MatriXX and 3% for EDR2 film. The percentage of pixels with $\gamma$%>1 for the 3%/3 mm and 2%/2 mm criteria was within 2% for use of both EDR2 film and the EPID. However, differences for the use of the MatriXX were seen with a maximum difference as great as 5.94% with the 2%/2 mm criteria. For the test fields, EDR2 film and EPID could detect leaf-positioning errors on the order of -3 mm and -2 mm, respectively. However it was difficult to differentiate leaf-positioning errors with the MatriXX due to its poor resolution. The approximate time to perform QA was 110 minutes for the use of EDR2 film, 80 minutes for the use of the MatriXX and approximately 55 minutes for the use of the EPID. Conclusion: This study has evaluated the accuracy and efficacy of EDR2 film, the MatriXX and EPID in the pre-treatment verification of IMRT. EDR2 film and the EPID showed better performance for accuracy, while the use of the MatriXX significantly reduced measurement and analysis times. We propose practical and useful methods to establish an effective QA system in a clinical environment.

• Korean Journal of Psychosomatic Medicine
• /
• v.27 no.2
• /
• pp.77-84
• /
• 2019

Objectives : The Illness Intrusiveness Rating Scale (IIRS) is a well-validated self-report instrument for assessing negative impact of chronic illness and/or adverse effects of its treatment on everyday life domains. Although extensive literature probed its psychometric properties in medical illness, little attention was paid for its validity for psychiatric population. This study aimed to test factorial structure of the Korean Version of the IIRS (IIRS-K) in a consecutive sample of psychiatric outpatients. Methods : Data set of 307 first-visit patients of psychiatric clinic at Guri Hanyang univ. Hospital were used. Exploratory and confirmatory factor analysis, internal consistency were tested in IIRS-K. We also checked Spearman's correlation analysis between IIRS-K, Zung's self-report anxiety scale and Zung's self-report depression scale. Results : 76.9% of the patients were with anxiety disorder and depressive disorder. The principal component factor analysis of the IIRS-K extracted three-factor structure accounted for 63.2% of total variance that was contextually similar to the original English version. This three-factor solution showed the best fit when tested confirmatory factor analysis compared to the original IIRS, two-factor model of IIRS-K suggested from medical outpatients, and one-factor solution. The IIRS-K also showed good internal consistency (Cronbach's α=0.90) and good convergent validity with anxiety and depression scales. Conclusions : The IIRS-K showed the three-factor structure that was similar but not identical to original version. Overall, this study proved factorial validity of the IIRS-K and it can be used for Korean clinical population.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2014

Purpose : For non-small cell lung cancer, if the treatment volume is large or the total lung volume is small, and the tumor is located in midline of patient's body, total lung dose tends to increase due to tolerance dose of spinal cord. The purpose of this study is to compare and evaluate the total lung dose of three dimensional conformal radiotherapy(3D CRT), intensity modulated radiotherapy(IMRT) and volumetric modulated arc therapy(VMAT) using restricted angle for non-small cell lung cancer patients. Materials and Methods : The treatment plans for four patients, being treated on TrueBeam STx($Varian^{TM}$, USA) with 10 MV and prescribed dose of 60 Gy in 30 fractions, 3D CRT, restricted angle IMRT and VAMT radiotherapy plans were established. Planning target volume(PTV), dose to total lung and spinal cord were evaluated using the dose volume histogram(DVH). Conformity index(CI), homogeneity index(HI), Paddick's index(PCI) for the PTV, $V_{30}$, $V_{20}$, $V_{10}$, $V_5$, mean dose for total lung and maximum dose for spinal cord was assessed. Results : Average value of CI, HI and PCI for PTV was $0.944{\pm}0.009$, $1.106{\pm}0.027$, $1.084{\pm}0.016$ respectively. $V_{20}$ values from 3D CRT, IMRT and VMAT plans were 30.7%, 20.2% and 21.2% for the first patient, 33.0%, 29.2% and 31.5% for second patient, 51.3%, 34.3% and 36.9% for third patient, finally 56.9%, 33.7% and 40.0% for the last patient. It was noticed that the $V_{20}$ was lowest in the IMRT plan using restricted angle. Maximum dose for spinal cord was evaluated to lower than the tolerance dose. Conclusion : For non-small cell lung cancer, IMRT with restricted angle or VMAT could minimize the lung dose and lower the dose to spinal cord below the tolerance level. Considering PTV coverage and tolerance dose to spinal cord, it was possible to obtain IMRT plan with smaller angle and this could result in lower dose to lung when compared to VMAT.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.35-40
• /
• 2018

Purpose : The range of force differs from the size of proton energy used in our hospital. The compensator enables to change energy size based on distal thickness which also makes changes in dose rate. Therefore, the purpose of this study is to evaluate the effect of changing the thickness of compensator distal on dose range and beam on time. Subject and Methodology : Five low energy patients who have received proton therapy were selected as subjects for this study. Beam on was checked for the selected patients during the existing therapy. After then, the thickness of distal of compensator was increased by 2 cm up to 14 cm through proton therapy plan system(TPS) for comparative analysis. For the evaluation of dose range, the value of the target's conformity index(CI) and the maximum dose of rear side target's organ at risk(OAR) were compared. Furthermore, to evaluate the effect of therapy time, beam on time was compared by making compensator distal in each thickness. Result : The result of homogeneity index and conformity index of the increased compensator distal showed the same level in all patients. The comparison results of OAR of target rear side showed 7 cGy at spine cord of abdomen at maximum, 88 cGy at eyeball's RT lens, 391 cGy at RT lens of nasal cavity 51 cGy at trachea of the mediastinum, and 661 cGy at a small bowl of the pelvis. The comparison results of the beam on time showed a reduction from 126 seconds to 62 seconds for the abdomen, from 105 seconds to 37 seconds for the eyeball, from 187 seconds to 134 seconds for nasal cavity, from 100 seconds to 40 seconds for mediastinum, from 440 seconds to 118 seconds for the pelvis. Conclusion : The research result showed that as the distal thickness of compensator increased, the size of energy increased. In addition, beam on decreased due to the increase of dose rate. It is expected that the result would help reduce the treatment time and increase the convenience of patients if it is applied to liver patients who need respiratorygated therapy and pediatric patients. However, distal penumbra increased as the size energy increased. Therefore, in treating cases where OAR is in the vicinity of the target rear side, the influence of penumbra should be taken into account in adjusting thickness level of the compensator in proton therapy plan.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.29 no.1
• /
• pp.14-34
• /
• 2016

Objectives: The objective of this study was to evaluate the effects of cytotoxicity, skin regeneration, anti-wrinkle, whitening and skin moisturizing of Oncheongeum (OCE).Methods: The cytotoxicity of OCE lyophilized aqueous extracts (yield=13.82%) was observed against human normal fibroblast cells and B16/F10 murine melanoma cells by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium Bromide (MTT) assay, and skin regeneration and anti-wrinkle effects were also evaluated through the assay of collagen type I synthesis compared to the transformation of the growth factor (TGF)-β1, hyaluronidase, collagenase and matrix metalloproteinase (MMP)-1 inhibitory assays compared to oleanolic acid (OA), and elastase inhibitory effects compared to phosphoramidon disodium salt (PP). In addition, OCE’s whitening effects were measured by a tyrosinase inhibitory assay and melanin formation test in B16/F10 murine melanoma cells compared to arbutin, and skin moisturizing effects were observed through a mouse skin water content test, respectively. Results: No OCE treatment-related cytotoxic effects appeared on human normal fibroblasts and B16/F10 murine melanoma cells. OCE concentration-dependently increased the collagen Type I synthesis on human normal fibroblast cells, and also effectively inhibited hyaluronidase, elastase, collagenase and MMP-1 activities. In addition, OCE inhibited melanin production of B16/F10 murine melanoma cells and activity of tyrosinase. And significant and dose-dependent increases of skin water content were detected in OCE-treated mouse skin compared to vehicle control skins. Conclusions: OCE showed favorable and sufficient effects in skin regeneration, anti-wrinkle, whitening and skin moisturizing in this experiment. But more detail mechanisms and studies on the skin protective efficiency of in vivo are needed with the screening of active biological compounds in individual OCE herbs.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.163-177
• /
• 2019

As smartphones are getting widely used, human activity recognition (HAR) tasks for recognizing personal activities of smartphone users with multimodal data have been actively studied recently. The research area is expanding from the recognition of the simple body movement of an individual user to the recognition of low-level behavior and high-level behavior. However, HAR tasks for recognizing interaction behavior with other people, such as whether the user is accompanying or communicating with someone else, have gotten less attention so far. And previous research for recognizing interaction behavior has usually depended on audio, Bluetooth, and Wi-Fi sensors, which are vulnerable to privacy issues and require much time to collect enough data. Whereas physical sensors including accelerometer, magnetic field and gyroscope sensors are less vulnerable to privacy issues and can collect a large amount of data within a short time. In this paper, a method for detecting accompanying status based on deep learning model by only using multimodal physical sensor data, such as an accelerometer, magnetic field and gyroscope, was proposed. The accompanying status was defined as a redefinition of a part of the user interaction behavior, including whether the user is accompanying with an acquaintance at a close distance and the user is actively communicating with the acquaintance. A framework based on convolutional neural networks (CNN) and long short-term memory (LSTM) recurrent networks for classifying accompanying and conversation was proposed. First, a data preprocessing method which consists of time synchronization of multimodal data from different physical sensors, data normalization and sequence data generation was introduced. We applied the nearest interpolation to synchronize the time of collected data from different sensors. Normalization was performed for each x, y, z axis value of the sensor data, and the sequence data was generated according to the sliding window method. Then, the sequence data became the input for CNN, where feature maps representing local dependencies of the original sequence are extracted. The CNN consisted of 3 convolutional layers and did not have a pooling layer to maintain the temporal information of the sequence data. Next, LSTM recurrent networks received the feature maps, learned long-term dependencies from them and extracted features. The LSTM recurrent networks consisted of two layers, each with 128 cells. Finally, the extracted features were used for classification by softmax classifier. The loss function of the model was cross entropy function and the weights of the model were randomly initialized on a normal distribution with an average of 0 and a standard deviation of 0.1. The model was trained using adaptive moment estimation (ADAM) optimization algorithm and the mini batch size was set to 128. We applied dropout to input values of the LSTM recurrent networks to prevent overfitting. The initial learning rate was set to 0.001, and it decreased exponentially by 0.99 at the end of each epoch training. An Android smartphone application was developed and released to collect data. We collected smartphone data for a total of 18 subjects. Using the data, the model classified accompanying and conversation by 98.74% and 98.83% accuracy each. Both the F1 score and accuracy of the model were higher than the F1 score and accuracy of the majority vote classifier, support vector machine, and deep recurrent neural network. In the future research, we will focus on more rigorous multimodal sensor data synchronization methods that minimize the time stamp differences. In addition, we will further study transfer learning method that enables transfer of trained models tailored to the training data to the evaluation data that follows a different distribution. It is expected that a model capable of exhibiting robust recognition performance against changes in data that is not considered in the model learning stage will be obtained.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.26-36
• /
• 2017

Korea is preparing an offshore carbon capture, transport and storage (CCS) demonstration project which is recognized as one of important $CO_2$ reduction technologies to mitigate climate change. The offshore CCS project aims to transport, inject and store large amount of $CO_2$ into offshore geologic formation, and has a potential risk of leakage which might cause disastrous damage to human health, environment and property. Therefore, in order to ensure the safety of the offshore CCS project, a strict HSE (health, safety and environment) management plan and its implementation are required throughout the project life cycle. However, there are no HSE domestic laws or regulations applicable to CCS projects, and the related research is insufficient in Korea. For the derivation of the essential and urgent requirement in HSE management framework applicable to the offshore CCS project in Korea, we analysed the HSE management methodologies and foreign CCS HSE management guidelines and cases. First, this paper has analyzed ISO 31000, a generalized risk management principles. Second, we have investigated the HSE management practices of CCS projects in Norway and UK. Based on the analyses, we suggested the necessity of developing the HSE Philosophy and the HSE management process through the whole life cycle. Application of HSE management in early phase of an offshore CCS project will promote systematic and successful project implementation in a cost-effective and safe way.