• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.280-285
• /
• 2001

This paper presents a modelling of thermal discharge performance for a static ice-on-coil ice-storage tank. Through the present study, discharging characteristics were examined with the existing results of theoretical and numerical heat transfer analyses. Also, an experiment was conducted to obtain a real set of discharge performance. The thermal effectiveness, the ratio of the actual heat transfer rate to the maximum possible heat transfer rate, decreased when the stored energy decreased during discharging period. And the effectiveness increased as the coolant flow rate through the storage increased, of which increasing rate decreased abruptly near the maximum and the minimum stored energy. An empirical correlation was obtained from the experimental and the numerical analysis data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.4
• /
• pp.337-344
• /
• 2000

The present study describes a one-dimensional modeling of encapsulated ice storage tanks. The thermal transmittance of capsules in this model uses the results from the Arnold's experimental $study^{(2-3)}$.In this model, ice storage tank is partitioned by several control volumes for the analysis, each having same number of capsules. The model is validated by the comparison of the measured data from an ice storage tank installed at a building with the capacity of 1200 ton-hrs and the simulated results with the same inlet brine temperature conditions into the tank.

• YAKHAK HOEJI
• /
• v.13 no.1
• /
• pp.38-42
• /
• 1969

Chloropentammine chromium(III) chloride를 출발물질로 하여 여러가지의 thiocyanatoammine계 착화합물을 합성하는 실험에 있어서 그 수득량이 예상보다 매우 적고 그 염의 모액이 농적자색이라는 점으로 보아 그 모액중에 어떠한 다른 착화합물이 다량 형성되어 있으리라고 추측하여 그 분리를 시도하였다든바 미려한 적자색의 결정을 얻었다. 그리고 분석에 의하여 이 물질이 potassium hexathiocyanatochromate(III) 임을 증명하였다. Cr$^{+++}$ 의 thiocyanate 착화합물형성에 관하여는 Niel Bjerrm$^{(8)}$에 의한 보고문이 있고 또 이들의 제법으로서는 Roesler$^{(9)}$들에 의하여 Potassium chromium alum에서부터 이 물질을 만드는 방법만이 보고되어 있을뿐이다. 따라서 Chloropentammine chromium(III) chloride에서 부터 이 물질을 만드는 이 새로운 방법이 이러한 화합물들의 제법으로서 앞으로 이용될 수 있는것으로 사료한다. 제조 방법: Chloropentammine chromium(III) chloride 3g을 KSCN 24g, 빙초산 24ml및 물 48ml의 혼합수용액에 현탁시킨 혼합물을 처음에는 잘 교반하면서 가온하고 다음 완전히 용해될때까지 끊인다. 냉각시킨 다음 생성된 증황색의 침반 Thiocyanatopentammine chromium(III) thiocyanate를 여과하고 여액 65ml에 KSCN 50g을 추가하여 완전용해시킨다. 이 용액을 방냉시키면 적자색의 미려한 결정이 석출되므로 이 결정을 여과하여 ethanol로 세척하고 진공 desiccator중에서 건조시켰다. 수득량 1.2~1.3g.

• Proceedings of the Culinary Society of Korean Academy Conference
• /
• 2002.04a
• /
• pp.42-78
• /
• 2002

ㆍ 제주전통두부 제조에 따른 지역별 원료대두의 전처리 공정은 \circled1 생두부 -> 수침 -> 맷돌분쇄, \circled2 생두부 -> 맷돌분쇄 -> 수침 그리고 \circled1과 \circled2를 병행한 방법이 있었다. ㆍ비지제거공정의 경우 비지를 제거하는 지역과 비지를 제거하지 않는 지역(성읍)이 있었으며, 비지분리를 위한 첨가제로 돼지기름(내도) 또는 돼지기름과 쌀겨를 혼합(선흘)한 경우가 있었으며, 비지분리 횟수는 지역에 따라 1~3회 정도의 차이가 있었다. ㆍ 가열공정 중 가열용기는 가마솥을 사용하였고, 누름방지제로는 대부분의 지역에서 돼지기름을 사용하였고 일부 지역에서는 들기름을 사용하였다. ㆍ 응고공정 중 응고제로 해안선 지역에서는 해수를 사용하였고, 중간산 지역에서는 소금물을 이용하였으며, 염전이 있는 지역에서는 간수를 사용하였다. ㆍ 성형시간은 60~720분이었으며, 냉각은 수냉이 아닌 방냉을 하였다. 제주 전통두부는 주로 잔치, 상례, 기제사, 명절 등 대소사에 사용하였으며 대부분 가열조리하지 않고 섭취하였다.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2002

This paper is concerned with the development of a new method for making, separating ice and storage floated ice by installing an evaporation plate at under-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating an ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. Developed new harvest-type method shows good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, however these components are not necessary in a new method. In this study ice storage systems are experimentally investigated to study the charge and discharge of thermal energy. The results show the applicable possibility and performance enhancement of a new type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.1
• /
• pp.9-20
• /
• 1989

This paper presents an analysis to predict thermal behaviors of water in ice storage tank during the coldness release process. To deal with complicated transient phenomena due to ice-water phase change and the density inversion, a theoretical model which consists of initial perfectly mixed, stratified and thermal diffusion state was introduced and a criterion on the growth of thermal boundary layer was developed. The analysis includes considerations on the type of ice-making heat exchanger, refrigerator on/off and tank arrangement. Also, discussions on the various parameters and operating conditions which have influence on the performance of the system were made. Finally, simulated results were shown, which agreed with experiments in trends reasonably.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.298-303
• /
• 2001

A fundamental study on the under water harvest-type ice storage system and its temperature characteristics in ice storage system was performed experimentally. The experiments were conducted by changing the inlet refrigerant temperature of an evaporator to analyzing the thermal fluid motion inside the ice storage tank. From the experimental results, the cold storage characteristics were investigated by measuring the axial and radial temperature variations inside the ice storage tank with respect to the inlet and outlet refrigerant temperatures of an evaporator. In case of the under water harvest-type ice storage system, thermal fluid. motion inside the ice storage tank was shown differently in comparison with that of other ice storage systems. During the cooling storage process, there was no supercooling phenomenon in the ice storage tank. These results show the characteristic of this system and the possibility of application to other fields.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.210-215
• /
• 2000

A fundamental study on the under water harvest-type ice storage system and its temperature characteristics in ice storage system was performed experimentally. The experiments were conducted by changing the inlet refrigerant temperature of an evaporator to analyzing the thermal fluid motion inside the ice storage tank. From the experimental results, the cold storage characteristics were investigated by measuring the axial and radial temperature variations inside the ice storage tank with respect to the inlet and outlet refrigerant temperatures of an evaporator. In case of the under water harvest-type ice storage system, thermal fluid motion inside the ice storage tank was shown differently in comparison with that of other ice storage systems. During the cooling storage process, there was no supercooling phenomenon in the ice storage tank. These results show the characteristic of this system and the possibility of application to other fields.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.268-273
• /
• 2001

A fundamental study on the harvest-type ice storage system applied ice making method in-water and its temperature characteristics in ice storage system was performed experimentally of the charge and discharge of cold. This paper is concerned with the development of a new method for making and separating ice and saving floated ice by installing an evaporation plate at in-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating a formed ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. A new harvest-type method shows very good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, but these components are not necessary in a new method. In this study two kinds of ice storage systems are experimentally investigated to study the thermal characteristics of ice storage tanks.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.11
• /
• pp.624-630
• /
• 2013

A truck refrigeration system using phase change material (PCM) is expected to have a lower noise level, reduced energy cost, and much lower local greenhouse gas emission. Recently, a forced convection type PCM refrigeration module has been developed. As the operation time increases, the PCM around the air inlet melts, because of a large temperature difference between the PCM and air. Therefore, the latent heat transfer area decreases and the heat transfer rate of the module decreases even though there is a lot of PCM which does not melt around the air outlet. A computational fluid dynamic modeling of the PCM refrigeration module was developed and validated by the experiment. Using the CFD, the design parameters, such as the mass flow rate of the air and roughness of the slab, were investigated to improve the heat transfer inhomogeneity. As a result, the adoption of partial roughness on the slabs improved the heat transfer inhomogeneity and reduced a fan power.