• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.971-977
• /
• 2015

Because foam metal has the excellent physical characteristics and mechanical performance, they are applied extensively into a lot of advanced technology areas. The aluminum foam with closed cell is one of the foam metals. It is applied widely into automobile and airplane because of the excellent absorption performance of impact energy. In this study, the mechanical characteristics by thickness was analyzed through the impact experiment of closed-cell aluminum foam, and the simulation analysis was performed for the verification. As the simulation analysis method, a finite-element analysis was carried under the same boundary conditions as the experiment by using ANSYS. By comparing with the results of experiment and simulation, it was thought that the case of thickness of 20mm was the most efficient of among the cases of thicknesses of 10mm, 20mm and 30mm. At the case of thickness of 20mm, the absorption energy by comparing with the specimen thickness is shown to become the most among three models. By using the result of this study, it is thought that it can apply the material necessary to develop the mechanical structure with aluminum foam.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.50-50
• /
• 2011

국내 섬유산업은 해외로부터의 저가 섬유제품이 대량으로 유입되는 속에서도 수출의 상당한 부분을 차지하며, 꾸준히 양에서 질로의 전환을 도모해 왔으며, 특히 최근에는 섬유 전반에 걸쳐 고부가 가치화를 지향하고 있다. 이러한 소비자의 요구에 부응하여 섬유소재에도 다양한 신개념과 이를 충족시킬 수 있는 기술이 요구되고 있으며, 그 가운데 하나의 영역을 구축해 나가고 있는 분야가 면 리플가공과 같은 표면 형태 가공이며, 최근 들어 폴리에스테르 입체(3D)가공제의 개발 및 가공 방법도 이런 흐름에 부응하여 업계에서 절실한 개발을 요구하고 있는 분야이다. 기존의 폴리에스테르 및 합성섬유의 입체 가공에 적용된 화학제품보다 성능은 우수하면서, 가공 공정이나 완성된 섬유제품에 전혀 잔존하지 않아 인체친화적(기존의 제품들은 인체에 유해한 재료이면서 가공 후 잔존함)이며, 환경적인 측면에서도 친환경을 유지하면서 새로운 폴리에스테르섬유, 좀 더 폭넓게는 열가소성인 모든 합성섬유의 입체가공이 가능한 약품의 개발 및 이를 이용한 가공방법의 개발은 매우 중요한 의의를 가지게 된다. 본 연구에서는 폴리에스테르의 3D입체 디보싱을 부여하는 합성바인더가 물에 의한 용해도를 확인하기 위하여 용액의 PH에 따른 용해성 시험을 진행하였으며, 합성한 발포제의 양에 따른 3D입체형성 정도를 이미지로 형상화 하였다.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.623-633
• /
• 2002

The flame retardant and thermal properties of ortho-cresol novolac (OCN) and biphenyl epoxy blends containing red-phosphorus were investigated. For five types of compounds designed with the volume ratio of OCN and biphenyl epoxy, thermal properties were analysed by TGA or DTC, and flame retardancy effectiveness was estimated through UL-94V test. While the flame retardant and thermal properties were improved with the content of filler and red-phosphorus, the excessive amount of red-phosphorus caused to deteriorate those properties. Using the blends of OCN/biphenyl rather than pure OCN or biphenyl epoxy as a matrix the flame retardancy of composites could be improved by the synergic effects of high thermal resistance of OCN and intumescent property of biphenyl. The flame retardant me chanism of epoxy compound containing red-phosphorus could be thought of the heat-insulating effect of intumescent char-layer formed in the surface of composites.

• The monthly packaging world
• /
• s.158
• /
• pp.160-167
• /
• 2006

인쇄문화산업진흥추진위원회 인쇄문화산업진흥법 제정 공청회 열어/ 한국포장기계협회 4월 정기이사회의 개최/ 인쇄기술정보협회 제2회 국제인쇄기술컨퍼런스 개최/ (사)한국발포스티렌재활용협회 지난 해 스티로폼 재활용 67.1% 달성/ 한국포장기술인협의회 춘계 체육대회 개최/ 한국프라스틱연합회 전국중소기업인대회 대통령 표창 수상/ 한국주류수입협회 서울국제주류박람회 개최/ (사)한국식품기기위생안전진흥협회 생활환경시험연구원 업무협약 체결/

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.618-624
• /
• 1989

Ultrasonically induced bubble formation in thermoplastic matrix was investigated experimentally and theoretically. polystyrene was saturated with nitrogen under the pressure of 0.2 to 3.45 MPa in a pressure chamber, followed by pressure release and ultrasonic bubble nucleation. Zinc stearate was added to polystyrene as the nucleating agent to induce heterogeneous nucleation. Various mixture of low density polyethylene and polyethylene wax was also saturated with the gas. The foamed specimens with or without ultrasonically induced bubble nucleation was modeled by modifying the classical nucleation theory. The rate of ultrasonic nucleation was predicted for homogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous and heterogeneous nucleation at a conical cavity. This study showed that the heterogeneous nucleation must be employed for ultrasonic production of bubbles in a viscous fluid and the homogeneous nucleation for ultrasonic production of bubbles in a low viscosity fluid.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.309-316
• /
• 2003

EAF(Electric Arc Furnace) Dust classified as special wastes containing heavy metal contaminants may cause to damage an environment such as underground water contamination if they were not treated properly. The possibility of producing the porous sintered body made from EAF Dust/clay composition system was studied. Mixing of EAF Dust and clay was carried out using wet-mixing process and two different sintering methods such as rapid and normal heat treatment were tried. By observing density, porosity and microstructure of sintered bodies, it was found that the bloating phenomenon depend on the contents of C, where the liquid phase occur or not during the sintering process. To obtain a light-aggregate of porous body due to bloating, the rapid heating was better than the normal heating at sintering process.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.785-792
• /
• 2012

Foam structure is usually hard to model due to the complexity of the geometry of cells. So, many simplified models to represent complicated foam structures have been proposed, but most of them are not actually describe the random feature of the cell structure well. So, in this study, two dimensional isotropic and anisotropic closed cell structures of the foam were modeled using the concept of Voronoi cells. The elasto-plastic deformation behavior under compressive loads was investigated by finitie element analysis, and the results were compared with ideal honeycomb structure. In addition, the effect of anisotropy of Voronoi cell structures of the foam on Young's modulus and yield stress under compressive loads was studied.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.117-123
• /
• 2018

The increase in energy efficiency has became a significantly important issue for building construction and maintenance. The energy efficiency is known to be achieved by using a material with lower thermal conductivity, and the best method is to increase the internal porosity of the material. Typical ways to increase internal porosity within cementitious composite are to use foaming agents or to use reactive powder such as aluminum. However, in this work, hydrogen peroxide was chosen as an alternative material to make lightweight cement mortar. The volume expansion of fresh cement mortar and unit weight, compressive strength and thermal conductivity of 28 day old cement mortar were measured. According to the experimental results, the incorporation of hydrogen peroxide increased internal porosity, and thereby reducing the compressive strength and thermal conductivities of cement mortar. It was found that hydrogen peroxide can be successfully used to produce lightweight mortar for thermal insulation purposes of buildings.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.131-131
• /
• 2002

종이가 인류의 생활에 미치는 비중은 정보의 전달을 제 l의 목적으로 사용되고 있는 인쇄용 지와 필기용지가 차지하는 것이 가장 크다. 정보전달의 매개로 사용되는 종이의 용도 이외 의 것을 살펴보면 전사지, 감압.감열지, 절연지,OMR지, 항공권지, 벽지 등과 같은 특수지와 기능지가 있다. 특히 벽지는 다양한 문양과 색감으로 인간의 미적 감각과 정신적 안정감에 미치는 영향이 크다. 벽지의 기능은 여러 가지의 목적으로 우리들의 실생활에 있어서 없어서는 안될 중요한 건축 재료로서 사용되고 있다. 가장 중요한 벽지의 목적은 앞서 언급한 바와 같이 미려한 색상과 다양한 디자인으로 도안.인쇄 및 발포 처리된 벽지를 사용하여 단순한 벽면을 개인의 취향 에 맞게 함으로써 심리적 안정감을 가져옴과 동시에 미적 가치를 증가 시켜 문화 수준의 향 상에도 영향을 미치는 것으로 알려져 있다. 그러나 종이 벽지와 종이 벽지 원지를 기저로 하여 제조된 발포 벽지는 인화성이 강하기 때 문에 이들에 대한 적절한 난연 처리가 요구 되고 있다. 매년 발생되는 다양한 형태의 화재 는 돌이킬 수 없는 인명과 재산의 손실로 귀결되어 각별한 주의가 요구되기 때문에 주거공 간과 대중의 군집이 많이 이루어지는 공공장소에서의 난연 처리된 벽지 사용에 대한 중요성 이 나날이 그 강도를 더 해가고 있는 실정이다. 난연 처리된 벽지는 통상적인 벽지에 비하 여 제조 원가의 상승에 따라 가격이 비싸기 때문에 일반인들에게 있어서 그 사용은 주목할 정도로 증가되지 못하고 있으나, 생활 수준이 향상 될수록 안전에 대한 의식 강화와 정부의 노력으로 인하여 그 사용량은 크게 늘어날 것으로 기대된다. 따라서 본 연구에서는 종이의 제조에 사용되는 원지의 충전제 종류와 양 그리고 난연 처리 된 폴리에스테르 섬유의 혼합을 달리하여 제조된 원지를 사용하여 난연 처려한 후 이들의 인화 특성에 대해 고찰 함으로써 보다 향상된 성능을 발휘 할 수 있는 난연 벽지의 제조와 개발에 보탬이 되고자 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.955-960
• /
• 2012

In this study, pure Polyurethane and commonly used flame retardants $Al(OH)_3$ and $Mg(OH)_2$, the add-in sample and Cloisite Na+, Cloisite 15A added sample of flammability and mechanical properties are compared. Sodium silicate and a mixture of polyurethane that the lightweight filler Vermiculite, Perlite addition of flame retardant and mechanical properties of the sample was confirmed. As a result, the flame retardant additive in the Vermiculite and Perlite in a flame-retardant grade sample except sample were identified. Tensile strength is degrade accord to the filler amount. But, Sodium silicate in the case of the sample add-in, other than confirmed that the sample strength increases.