• Title/Summary/Keyword: 발진기

Search Result 943, Processing Time 0.022 seconds

A Development of Jig Circuit for Performance Evaluation of an Oscillator (발진기의 성능평가를 위한 지그 회로의 개발)

  • Lin, Chi-Ho;Yoon, Dal-Hwan
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.11
    • /
    • pp.95-101
    • /
    • 2008
  • We have used diversely the multilayer ceramic oscillator of the SMD(Surface Mounted Device) package technology that connects the crystal with the chip package. Such an oscillator occurs a stray inductance and a parasitic capacitance by the length and inner pattern. And it has been happened an amplitude attenuation and signal loss due to the reflection of power source and noise component. So we don't evaluate the precise performance of the oscillator for these factors. In this paper we have developed the Jig system to evaluate the performance of the oscillator. Through this system, we will expect an advanced performance of the oscillator and redesign an oscillator of the low jitter characteristics and low phase noise.

Design of Low Phase Noise Frequency Synthesizer for Digital MMDS Downconverter (디지털 MMDS 하향변환기용 저 위상잡음 주파수 합성기의 설계)

  • 김영진
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.6 no.2
    • /
    • pp.151-158
    • /
    • 2002
  • In this paper, Phase locked microwave oscillator having the low phase noise and high stability for digital MMDS down converter was designed. we have been analyzed the low phase noise properties by the active device nonlinear equivalent circuits and derived the necessary and sufficient conditions for high stable voltage control oscillator. And it is applied to phase locked loop, we design the phase locked microwave oscillator of frequency synthesizer. Experimental results of designed phase locked oscillator shows -85dBc/Hz @ 10KHz phase noise properties and simulation result is -90Bc/Hz @ 10kHz respectively we shows that proposed low phase noise and stable conditions of phase locked microwave oscillator can be applied to design the high stable digital MMDS frequency synthesizer.

High Power Transmitters (고출력 전자파 발진기)

  • 박건식
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.1
    • /
    • pp.29-37
    • /
    • 1997
  • CW나 pluse의 형태로 RF를 발진하는 고출력 전자파 발진기는 레이더 체계의 기본요소이다. 레이더 체계의 성공적인 운행을 위한 요건 중에 적합한 전자파 발진기의 선택과 개발을 무시할 수 없다. 이차세계대전을 전후로 활발히 개발되었던 전자파 발진기들 중에는 널리 알려진 Magnetron과 klystron 이 있고 TWT(traveling wave tube)도 그 후 널리 사용되는 발진기이다. 지난 반세기를 지나오며 성능 및 신뢰도 등에서 괄목할만한 발전을 이루었으며 밀리미터파대역의 고출력 발진을 위해 gyrotron 등이 지난 30년간 개발되었다. 현재는 성능, 크기(무게) 및 가격의 문제뿐 아니라 고정밀 영상을 위한 고주파 발진기의 개발이 추진되고 있다. 여기서는 현재 레이더에 쓰이고 있는 magnetron, klystron, TWT 및 gyrotron에 대한 간략한 배경, 원리 및 특성 등을 비교 설명하였다.

  • PDF

Analytical Proof of Conservation of Power in the LTV Phase Noise Theory for Noisy Oscillators (선형시변 발진기 위상잡음 이론의 전력 보존성의 증명)

  • Jeon, Man-Young
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.7 no.4
    • /
    • pp.855-859
    • /
    • 2012
  • This study derives a generalized PSD formula in the LTV phase noise theory for noisy oscillators. The derived formula analytically proves that the LTV phase noise theory can predict the conservation of the power in the noisy oscillation signals. Additionally, the derived formula allows the theory to account for the behavior of the power spectrum over the entire frequency range including the regions around higher harmonics as well as fundamental frequency.

A Novel Phase Noise Reduction in Hairpin Oscillator Using Aperture (Aperture를 이용한 Hairpin 발진기의 위상잡음 개선에 관한 연구)

  • 서철헌
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.8
    • /
    • pp.99-103
    • /
    • 2004
  • Aperture has been employed on the ground plane in the Hairpin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hairpin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.

Design and Implementation of a Chaotic Oscillator for UWB (UWB용 카오스 오실레이터의 설계 및 구현)

  • Kang, Sang-Gee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.12
    • /
    • pp.2136-2139
    • /
    • 2008
  • Chaotic oscillators can generate wide-band signals and the spectrum characteristics of the wide-band signals are not changed by switching on and off the output power of the oscillators. When communication systems use a chaotic oscillator, the communication system need not a local oscillator and a mixer used in conventional transceivers. Therefore the configuration of a communication system using a chaotic oscillator is simple and have the characteristics of low-power consumption. In this paper we design and implement a chaotic oscillator. And the test results of the implemented chaotic oscillator for UWB systems are presented. The implemented chaotic oscillator has -8.11dBm of the output power with 500MHz channel bandwidth at 3.4GHz of the center frequency and has about 410MHz of -10dB bandwidth.

Implementation and Design of the Voltage Controlled Oscillator Using Ring type DGS Resonator (링형 DGS 공진기를 이용한 전압제어 발진기의 설계 및 구현)

  • Kim, Girae
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.12
    • /
    • pp.2589-2594
    • /
    • 2012
  • In this paper, a novel resonator using ring type DGS is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator, and oscillator for 5.8 GHz band is designed using proposed DGS resonator. The ring type DGS resonator is composed of DGS cell etched on ground plane under $50{\Omega}$ microstrip line. At the fundamental frequency of 5.8 GHz, 7.6 dBm output power and -82.7 dBc@100kHz phase noise have been measured for oscillator with ring type DGS resonator. We designed the voltage controlled oscillator using proposed the DGS resonator with varactor diodes placed between gaps of DGS. Thus, due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

Performance Analysis of the Optoelectronic Oscillator using the Direct Modulation Laser (레이저 직접 변조를 이용한 광전 발진기의 성능 분석)

  • Cho, Jun-Hyung;Heo, Seo-Weon;Sung, Hyuk-Kee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.8
    • /
    • pp.2029-2036
    • /
    • 2014
  • The performance analysis of optoelectronic oscillator(OEO) based on a directly modulated semiconductor laser was theoretically achieved. First, the analysis was performed on the open response of the key components that constitute the OEO loop. Using the results, we simulated the open-loop characteristics of the OEO loop. By combining oscillation conditions of loop oscillator in addition to the open-loop magnitude and phase responses, theoretical performance analysis such as OEO's oscillation frequency, spurious tones and phase noise was successfully completed.

Implementation of RF Oscillator Using Microstrip Split Ring Resonator (SRR) (마이크로스트립 분리형 링 공진기를 이용한 RF 발진기 구현)

  • Kim, Girae
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.2
    • /
    • pp.273-279
    • /
    • 2013
  • In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator, and oscillator for 5.8GHz band is designed using proposed split ring resonator. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}$/4 microstrip resonator. Because it is possible that varactor diode or lumped capacitor is placed on the gaps of split ring resonator, resonant frequency can be controlled by bias voltage. We can design voltage controlled oscillator using proposed split ring resonator. Thus, due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

Design of a CPW Oscillator Using Spiral Resonators (나선형 공진기를 이용한 CPW 발진기 설계)

  • Koo, Ja-Kyung;Lim, Jong-Sik;Han, Sang-Min;Ahn, Dal
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.10
    • /
    • pp.2639-2645
    • /
    • 2009
  • This paper describes a CPW oscillator using a spiral resonator. Spiral resonators are very useful in design CPW oscillators since they show a relatively higher Q than CPW hairpin and helical resonators. Prior to the design of oscillators, three CPW resonators are designed and compared. Electromagnetic (EM) simulation are performed for an improved design in design the CPW resonators and oscillators. Three oscillators are designed at 5.7 GHz using the mentioned CPW resonators. The measured output power of three CPW oscillators using the helical, hairpin, and spiral resonators are 2.55 dBm, 2.64 dBm, and 4.98 dBm, respectively. In addition, the size of three resonators are $102.15mm^2,\;130.05mm^2,\;80.625mm^2$, respectively, so it is proven that the proposed CPW oscillator using the spiral resonator has a smaller size than the others.