• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.244-249
• /
• 2011

In this study, performance and economic analysis of 500 MWe coal-fired power plant with $CO_{2}$ capture process was performed. For this purpose, chemical absorption method which is commercially available and most suitable for thermal power plant was studied and a criteria for technical and economic assessment of power plants suggested by IEA Greenhouse Gas R&D Programme was used. And we performed the sensitivity analysis focused on regeneration energy which exceed half of the total capture energy. Based on MEA(Monoethanoleamine) as a main chemical solvent and 3.31 GJ/ton$CO_{2}$ regeneration energy in the stripper, net power efficiency was reduced from 41.0% (no capture) to 31.6%(with capture) and the cost of $CO_{2}$ avoided was estimated 43.3 $/ton$CO_{2}$. And in case of 2.0 GJ/ton$CO_{2}$ regeneration energy, the cost of $CO_{2}$ avoided was calculated as 36.7 $/ton$CO_{2}$.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.143-152
• /
• 2012

This study was performed to reduce the operating cost of a greenhouse by securing electric energy required for greenhouse operation. Therefore, it experimentally reviewed the performance analysis of photovoltaic system in terms of maximum amount of generated electric power based on the amount of horizontal solar radiation during daytime. That is to say, the maximum solar radiation at 300, 400, 500, 600, 700, 800 and 900 W. $m^{-2}$, respectively. The amount of momentary electric power of the photovoltaic system at any was about 970 W and we found that the momentary efficiency of the photovoltaic system that was used for this experiment was 97%. In the case of this system, we found that electric power will be generated when amount of horizontal solar radiation is more than 200 W. $m^{-2}$, at minimum. If the amount of horizontal solar radiation is increased, the maximum power generation is also increased. At that time, the maximum efficiencies were 30, 78, 86 and 90%, respectively. However, when the amount of insolation was about 800 W. $m^{-2}$, the maximum power generation tended to be lower than 700 W. $m^{-2}$. The efficiency which caused the maximum electric power was decreased to less than 97% of the momentary generated electric power. When the total amounts of horizontal solar radiation per day were 3.24, 8.10, 10, 90, 12.70, 14.33, 19.53 and $21.48MJ{\cdot}m^{-2}$ respectively, the total amounts of power energy were 0.03, 0.40, 3.60, 4.37, 4.71, 4.70 and 4.91 kWh. And it represented that the total amounts of power energy were either decreased or increased a bit on the border between some solar radiations. The temperature at the back of the array tended to be higher than the temperature at the front but it demonstrated an increased when the amount of solar radiation increased. In the case of this system, the performance of the module in terms of degradation has not been shown yet.

• Journal of Internet Computing and Services
• /
• v.5 no.4
• /
• pp.77-94
• /
• 2004

Recently, the needs of index structure which manages moving objects efficiently have been increased because of the rapid development of location-based techniques. Existing index structures frequently need updates because moving objects change continuatively their positions. That caused entire performance loss of the index structures. In this paper, we propose a new index structure called the TPKDB-tree that is a spatio-temporal index structure based on KDB-tree. Our technique optimizes update costs and reduces a search time for moving objects and reduces unnecessary updates by expressing moving objects as linear functions. Thus, the TPKDB-tree efficiently supports the searches of future positions of moving objects by considering the changes of moving objects included in the node as time-parameter. To maximize space utilization, we propose the new update and split methods. Finally, we perform various experiments to show that our approach outperforms others.

• The KIPS Transactions:PartD
• /
• v.18D no.2
• /
• pp.111-122
• /
• 2011

These days RFID application has been developed rapidly. It has been applied to many business areas such as logistics and supply chains. The Electronic Product Code (EPC) Network Architecture, an open global standard, is proposed by EPCglobal for developing RFID enabled systems. People who want to obtain the product information which are master information and event information have to apply with EPC Network Architecture. However, EPCIS which has master information and event information has to be accessed base on each EPC. Therefore, there is lots of duplicate accessing to EPCIS because RFID application has to access the same EPCIS over again which makes all performance down in EPC Network. This paper proposes how to reduce access times to EPCIS using EPC grouping based on EPCIS address. We build EPC Network environment to experiment about performance of RFID application system and we prove the improvement of EPC Network. Our result shows the reducing the EPCIS communication time by maximum 99 percentages.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.65-72
• /
• 2005

We can integrate more IP blocks on a silicon die as the development of fabrication technologies and EDA tools. Consequently, we can design complicated SoC architecture including multi-processors. However, most of existing SoC buses have bottleneck in on-chip communication because of shared bus architectures, which result in the performance degradation of systems. In most cases, the performance of a multi-processor system is determined by efficient on-chip communication and the well-balanced distribution of computation rather than the performance of the processors. We propose an efficient SoC Network Architecture(SNA) using crossbar routers which provide a solution to ensure enough communication bandwidth. The SNA can significantly reduce the bottleneck of on-chip communication by providing multi-channels for multi-masters. According to the proposed architecture, we design a model system for the SNA. The proposed architecture has a better efficiency by $40\%$ than the AMBA AHB according to a simulation result.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.728-736
• /
• 2014

Due to the recent development of mobile wireless telecommunication, RRHs(Remote Radio Heads) are widely being utilized to expand the cell coverage. Wire-link, an existing connection between DU(Digital Unit) and RRH through fiber cables, is considered to have limitations in relation to cost for a wide range of applications. This paper focuses on replacing the wire-link by wireless transmission using millimeter-wave, and implementing cellular network system through RRH from a remote location. After an influence element analysis on millimeter-wave wireless link transmissions, a comparative analysis between wireless link and an existing fiber link method will be made by utilizing currently commercialized LTE(Long Term Evolution), to prove the compatibility of millimeter-wave wireless link RRH method in replacing fiber link method without a significant decline in data transmission performance.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.55-64
• /
• 2009

In many developed countries, social infrastructure asset management has become an important issue for the effective operation and management, performance improvement, and providing better quality services. This paper describes infrastructure asset management practices in Korea and in the developed countries. Learning lessons from those countries and improve the asset management practices in Korea is the main theme of this paper. Considering the definition and basic structure of infrastructure asset management, authors have analyzed main concerns regarding infrastructure management, techniques, organizations (systems), and processes. The requirements and considerations are presented to overcome the limitations of current maintenance system. This paper will assist adopting infrastructure asset management in Korea and provide guide for the infrastructure maintenance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3267-3274
• /
• 2011

Recently, speech recognition technology has dramatically developed, with the increase in the user environment of various mobile devices and influence of a variety of speech recognition software. However, for speech recognition for multi-language, lack of understanding of multi-language lexical model and limited capacity of systems interfere with the improvement of the recognition rate. It is not easy to embody speech expressed with multi-language into a single acoustic model and systems using several acoustic models lower speech recognition rate. In this regard, it is necessary to research and develop a multi-language speech recognition system in order to embody speech comprised of various languages into a single acoustic model. This paper studied a system that can recognize Korean and English as International Phonetic Language (IPA), based on the research for using a multi-language acoustic model in mobile devices. Focusing on finding an IPA model which satisfies both Korean and English phonemes, we get 94.8% of the voice recognition rate in Korean and 95.36% in English.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.261-266
• /
• 2006

최근 낸드 플래시 메모리는 임베디드 저장 장치로서 많이 사용되고 있을 뿐만 아니라 플래시 메모리의 저장 용량의 대용량화로 하드 디스크를 대체하는 SSD(solid state disk) 같은 제품이 출시되고 있다. 플래시 메모리는 하드디스크에 비하여 저전력, 빠른 접근성, 물리적 안정성 등의 장점이 있지만 읽기와 쓰기의 연산의 불균형적인 비용과 덮어 쓰기가 안 되고 쓰기 전에 해당 블록을 지워야하는 부가적인 작업을 수행해야 한다. 이와 같은 특징은 플래시 메모리의 쓰기 성능을 저하 시키고 기존의 하드디스크를 대체하는 것을 어렵게 만든다. 이와 같은 플래시 메모리의 단점을 해결하기 위해서 본 논문에서 비휘발성 메모리와 플래시 메모리를 함께 사용하는 방법을 제안한다. 최근 MRAM, FeRAM, PRAM과 같은 차세대 메모리 기술의 발전과 배터리 백업 메모리의 가격 하락으로 인하여 비휘발성 메모리의 상품적 가치가 높아지고 있다. 하지만 아직까지 용량 대비 가격이 비효율적이기 때문에 소용량의 비휘발성 메모리를 활용하여 플래시 메모리의 쓰기 연산에 대한 단점을 보완하는 방법을 제안한다. 본 논문에서는 FTL 에서 비휘발성 메모리를 쓰기 버퍼로 이용한 여러 가지 버퍼 관리 정책을 실험하였고 각 관리 정책에 따른 플래시 메모리의 성능 향상을 측정하였다. 실험을 통하여 최대로 읽기의 횟수는 90% 감소, 쓰기 횟수는 33% 감소, 소거 횟수는 50% 감소 효과를 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1405-1411
• /
• 2022

Power management is still an important issue in embedded environments as hardware advances like high-performance processors. Power management methods such as DVFS control CPU frequencies in an adaptive manner for efficient power management in polling-based I/O programs such as network communication. This paper presents the problems of the existing power management method and proposes a new power management method. Through this, it is possible to reduce electric consumption by increasing the polling cycle in situations where the frequency of data reception is low, and on the contrary, in situations where data reception is frequent, it can operate at the maximum frequency without performance degradation. After implementing this as a code layer on the embedded board and observing it through Atmel's Power Debugger, the proposed method showed a performance improvement of up to 30% in energy consumption compared to the existing power management method.