• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.74-81
• /
• 2006

Experiments to measure the pool boiling heat transfer on the micro-fin surfaces were performed with PF5060. The effects of various orientation and subcooling of heat surface on pool boiling performance were investigated under various heat-flux conditions for plain and micro-fin surfaces. The comparison between the results of this study and those of previous work shows a similar trend at the same conditions. From the results, it is proved that nucleate boiling performance is strongly dependent on the orientation, the micro-fin structure and the subcooling of heat surface. The heat flux on the surface with orientation angles of $45^{\circ}$ and $90^{\circ}$ was larger than that on horizontal surface(${\theta}=0^{\circ}$) at same wall superheat because of the effect of bubble sweeping. The nucleate boiling performance of micro-fin surfaces is enhanced by decreasing the fin size(WxL) and the pitch, respectively. The subcooling makes nucleate boiling performance lower for both micro-fin and plain surfaces.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1353-1358
• /
• 2004

An experimental study of pool boiling behavior on micro-porous enhanced square heater surfaces immersed in PF5060 is performed. The effects of heater orientation, Subcooling and substrate distance on the pool boiling heat transfer performance for the double heaters were investigated under increasing heat-flux conditions. The boiling performance of micro-porous coated surface was better than that of plain surface. The double heaters with upper substrate of 0.2cm substrate interval have lower boiling performances compared with the results for the double heaters with that of 0.5cm and 1.0cm substrate interval and without the substrate. In comparison to upper heater and below heater with orientation, the upper heater has lower superheat temperature than the below heater due to the bubble sweeping.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.646-655
• /
• 2006

The present research is an experimental study on characteristics of cooling behavior for the adjacent copper blocks with surface roughness or micro-porous coated surface. The experiments were carried out at saturation state or within subcooled states of PF5060. The effects of heater orientation and the intervals between heating surfaces or substrates were investigated under various heat flux conditions. The boiling performance of copper block with micro-porous coated surface was better than that of copper block with surface roughness. It is understood that the bubble sweeping enhances boiling performance for the heaters with inclinations of $\theta=45^{\circ}\;and\;\theta=90^{\circ}$, where as the bubble flattening decreases boiling performance for the heaters with inclinations of $\theta=135^{\circ}\;and\;\theta=180^{\circ}$. In comparison to upper heater and below heater with orientation, the upper heater has lower superheat temperature than the below heater due to the bubble sweeping. It is also found that boiling performance decreases in the case of adjacent double heaters with only 0.2cm substrate interval.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.220-228
• /
• 1996

두 개의 siliconit 발열체를 써서 이단 전기로를 제작하여 수직 Bridgman법으로 CdTe 단결정을 성장시켰다. 상단전기로의 최고온부를 $1150^{\circ}C$로 고정시키고 하단전기로를 $800^{\circ}C$로 하였을 때, $22.51150^{\circ}C$/cm의 온도 기울기를 얻었다. 성장된 시료의 X$.$선 회절 실험으로부터 얻은 격자상수 $a_0$는 6.482$\AA$이었고, 실온에서 광흡수 측정으로부터 얻은 밴드갭 에너지는 1.478eV이었다. 광발광(PL) 실험으로부터, 구속된 엑시톤 방출 피크가 각각 ($A^0$, X) (1.5902, 1.5887ev), (h,$D^o$) (1.5918 eV) 그리고 ($D^o$, X) (1.5928, 1.5932 eV)의 방출 피크로 분리되는 것을 확인할 수 있었으며, 중성주개와 중성받개의 결합에너지와 이온화에너지를 계산하였다.