• Bulletin of the Korean Institute for Industrial Safety
• /
• v.1 no.1
• /
• pp.7-10
• /
• 2001

화학공장에서 발생되는 중대산업사고(major industrial accident)는 그 영향이 공장내부에만 국한되지 않고 인근 지역의 주민들과 환경에까지 치명적인 영향을 미친다. 이러한 중대산업사고의 원인은 여러 가지가 있을 수 있으나 발열화학 반응공정에서 발생될 수 있는 폭주반응도 그 중 하나이다. 폭주반응에 의한 중대산업사고(major industrial accident)의 대표적인 사례로는 인도의 보팔(Bhopal)에서 methylisocyanate 누출사고와 이탈리아의 세베소(Seveso) 폭발사고를 들 수 있으며 보팔 사고의 경우 사망자수가 2,000명 이상이었고, 20,000명 이상이 부상하였으며, 세베소 사고의 경우 막대한 환경피해를 입혔다.(중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.341-347
• /
• 2010

In this study, the efficiency of a solid-oxide fuel cell (SOFC) system with a steam reformer or prereformer was analyzed under various conditions. The main components of the system are the reformer, SOFC, and water boiling heat recovery system. Endothermic and exothermic reactions occur in the reformer and SOFC, respectively. Hence, the thermal management of the SOFC system greatly influences the SOFC system efficiency. First, the efficiencies of SOFC systems with a steam reformer and a prereformer are compared. The system with the prereformer was more efficient than the one with steam reformer due to less heat loss. Second, the system efficiencies under various prereformer operating conditions were analyzed. The system efficiency was a function of the heat requirement of the system. The efficiency increased with an increase in the operating temperature of the prereformer, and the maximum system efficiency was observed at $450^{\circ}C$ for a S/C of 2.0.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.907-914
• /
• 2004

The nitridation mechanism of Si by SHS at $Si-NaCl-NH_{4}Cl-NaN_3$ system was investigated in this work. It was revealed that NaCl as a diluent was helpful to the perfect nitridation reaction by retarding the growth of Si particle resulted from the melting of Si at the initial stage of the nitridation reaction. And $NH_{4}Cl\;and\;NaN_3$ formed NaCl through decomposition and combination, and the preheating of pellet was helpful to the nitridation reaction in this process. The main nitridation mechanism of this system was liquid-gas reaction. The optimum porosity of the pellet for the nitridation of ${\alpha}-Si_{3}N_4$ was $67-69\%$.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1015-1020
• /
• 2012

Lignite of low rank coal and petroleum coke of high sulfur content can be high potential energy sources for coal gasification process because of their plentiful supply. The steam gasification of lignite, anthracite, and pet coke has been carried out in both an atmospheric thermobalance reactor and a lab-scale fludized bed reactor (0.02 m i.d. ${\times}$ 0.6 m height). The effects of gasification temperature ($600{\sim}900^{\circ}C$) and partial pressure of steam (0.15~0.95 atm) on the gasification rate and on the heating value of product gas have been investigated. The modified volumetric reaction model was applied to the experimental data to describe the behavior of carbon conversion, and to evaluate kinetic parameters of char gasification. The results shows that higher temperature bring more hydrogen in the product syngas, and thus increased gas heating value. The feed rate of steam is needed to be optimized because an excess steam input would lower the gasification temperature which results in a degradation of fuel quality. The rank of calorific value of the product gas was anthracite > lignite > pet coke. Their obtained calorific value at $900^{\circ}C$ with 95% steam feed were 10.0 > 6.9 > 5.7 $MJ/m^3$. This study indicates that lignite and pet coke has a potential in fuel gas production.

• Elastomers and Composites
• /
• v.21 no.1
• /
• pp.13-19
• /
• 1986

The effects of several vulcanizing accelerators on the determination of kinetic parameters of natural rubber vulcanizate was studied by DSC. Kinetic parameters were determined by means of the calculation procedures of Borchardt-Daniels and Oscillating Disk Rheometer (ODR) cure curve analysis, using both DSC exothermal thermogram and ODR cure curve. In order to examine the credibility in the DSC method the same compound which was und for DSC method was used for the comparison with the results of ODR data. Upon this method, kinetic rate constant (k), and Arrehenius parameter (Ea, ko, n) have been determined for rubber compounds via a new method using DSC thermogram and ODR cure curve. In the comparison of DSC and ODR results, kinetic parameters has shown good agreements between two results. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method of kinetic study of rubber vulcanization.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.40-46
• /
• 1985

The equilibrium sorptions of C.I. Reactive Blue 19 and C.I. Reactive Blue 19 and C.I. Acid Blue 138 on Silk fibroin were investigated in the range of 50$^{\circ}C$, 70$^{\circ}C$, 90$^{\circ}C$ and to the pH range from 2.0 to 10.5. The results obtained are summarized as follows: 1) The amount of sorption of reactive dye was increased with the decrease of pH in dyeing solution and temperature. The amount of fixation showed the maximum value to pH 8.5 and 70$^{\circ}C$. 2) In acidic region, the sorption behavior of acid dye was similar to that of reactive dye, and Langmuir adsorption constant was increased with the decrease of pH. 3) Langmuir constant of both dyes was decreased with the increase of temperature, while standard affinity was increased. 4) The reaction of both dyes was exothermic and the values of $\Delta$S$^{\circ}$ were positive. 5) It was found that the sorption behavior of dyes against Silk fibroin could be described as Langmuir adsorption and Nernst distribution in lower pH region.

• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.33-36
• /
• 2007

합성가스는 C1화학을 시작하는 반응원료 물질로 최근 DME(dimethyl-ether), 메탄올, GTL(gas to liquid), CTL(coal to liquid), 암모니아 생성 공정 등 많은 화학공정에 사용되고 있다. 합성가스를 생산하는 방법은 천연가스 개질반응과 석탄의 가스화반응, 그리고 원유의 정제 등을 통해 얻을 수 있다. 삼중개질반응은 천연가스와 산소, 수증기, 이산화탄소를 원료로 $1000^{\circ}C$ 이상의 고온에서 반응시켜 합성가스를 생산하며, 균일반응계와 불균일반응계로 이루어져 있다. 균일반응계에서는 천연가스와 산소가 주로 반응하며, 원료로 투입된 대부분의 산소는 균일반응계에서 소모되어 일산화탄소와 이산화탄소를 생성한다. 삼중개질반응의 균일반응계에서는 산소와 천연가스와의 반응으로 많은 발열이 발생하여 전체 반응계의 온도를 유지할 수 있도록 해준다. 본 연구에서는 산소로 인한 삼중개질반응의 온도 조절과 균일반응계의 온도 분포를 위치에 따라 관찰해 보았으며, 실험과 모사를 통해 비교해 보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.725-728
• /
• 2007

본 연구에서는 액상폐기물의 가스화를 통하여 합성가스를 생산하는 공정기술에 관하여 고찰 하였다. 폐기물의 가스화공정기술은 공기, 산소등과 액상폐기물을 고온하에서 가스화반응시켜 폐기물중에 포함된 가연성성분은 CO, $H_2$가 주성분인 합성가스로 전환시키고, 폐기물내에 포함된 무기물은 용융시켜 slag의 형태로 배출시키는 기술이다. 폐기물투입장치, 가스화기 및 용융로, 슬랙배출장치, 합성가스 정제장치, 그리고 수처리장치등로 구성된 Bench급의 가스화용용시스템을 구성하고, 수분 16%, 발열량 4375kcal/kg의 액상폐기물을 가스화 실험한 결과 CO가 $31{\sim}35%$, $H_2$가 $28{\sim}36%$ 포함된 합성가스를 얻을 수 있었고, 합성가스의 발열량은 $1735{\sim}2160kcal/kg$로 나타났다. 또한 가스의 세정에 사용된 세정폐수의 분석과 무기물의 용융을 통하여 발생한 용용슬랙의 용출실험을 통해서 합성가스 생성과정에서의 이차오염 물질은 환경규제치 이하로 발생함을 확인할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.80-86
• /
• 2017

In this study, nitrogen functional groups were introduced on graphite fiber (GF) to modify their electrical properties, and heating properties were investigated according to the treatment conditions. GF was prepared by a thermal solid-state reaction at $200^{\circ}C$ for 2 h. Surface properties of the nitrogen doped GF were examined by XPS, and its resistance and heating temperature were measured using a programmable electrometer and thermo-graphic camera, respectively. The XPS result showed that the nitrogen functional groups on the GF surface were increased with increasing of urea contents, and the heating property of the GF was also improved as nitrogen functional groups were introduced. The maximum heating temperature of GF treated by urea was $53.8^{\circ}C$ at 60 V, which showed 55% improved heating characteristics compared to that of non-treated GF. We ascribe this effect to introduced nitrogen functional groups on the GF surface by thermal solid-state reaction, which significantly affects the heating characteristics of GF.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.66-72
• /
• 2022

Clozapine is accepted as the "gold standard" antipsychotics for treatment-resistant schizophrenia. Clozapine rarely causes extrapyramidal syndrome and tardive dyskinesia, which are common with other antipsychotics, and only a transient elevation of hyperprolactinemia has been reported. Despite such clinical usefulness, there are limitations to the use of clozapine due to adverse drug reactions (ADR). Fever is a common in adverse drug reactions associated with clozapine. At initiation of clozapine most fatal ADR such as agranulocytosis and neuroleptic malignant syndrome associated with fever, in which case clozapine should be discontinued immediately. However, as benign causes of fever are much more frequent than life-threatening ADR, clozapine should not be discontinued unconditionally in the event of fever during clozapine initiation. In addition, fever may occur at any time during the maintenance of clozapine treatment. In particular, since the risk of pneumonia does not decrease over time, and clozapine has a higher risk of pneumonia than other antipsychotic drugs, it is recommended to adjust clozapine dosage through therapeutic drug monitoring.