Search | Korea Science

Mechanical Stress Relief Technology and its Application (MSR을 이용한 용접잔류응력의 제거와 적용성 검토)

박지선;한명수;한종만
- Journal of Welding and Joining
- /
- v.15 no.3
- /
- pp.29-35
- /
- 1997
실제로 용접구조물의 재료에는 항상 내부 잔류응력이 존재하며 그 크기는 재료내의 내부 잔류응력간의 평형의 원리(Self-equilibrating system)에 의해 결정 된다. 일반적인 구조 강도설계에서 행해지는 탄성해석에서는 재료 내부에 존재하는 잔류응력을 고려하지 않기 때문에 설계시에 계산된 응력이 심하중하의 구조물에서 발생하는 응력과 같다고 볼 수는 없다. 철강재료를 사용한 구조물의 경우 구조물 제작 공정 전반에 걸친 성형가공 및 조립과정에 수반되어 재료 내에는 잔류응력이 발생되며 특히 용접조립에 의해 용접부 근방에서는 재료의 항복강도 수준의 상당히 큰 용접응력 이 발생하게 된다. 일반적으로 용접잔류응력의 완화법으로 가장 확실한 방법은 후열 처리법(Post weld heat treatment, PWHT)이지만 이 방법의 적용은 구조물의 크기에 제한을 받게 된다. 따라서 PWHT를 적용하기 어려운 구조물에 대해서는 다른 방법에 의해 용접잔류 응력을 완화시켜야 하며 이 경우에 일반적인 방법으로 기계적 응력완화 법(Mechanical stress relief method, MSR)이 있다. 본고에서는 MSR의 기본원리에 대하여 간단하게 정리하고 실 구조물에 대한 MSR 적용시 고려해야 할 제반사항을 위하여 단순 용접부에 대한 MSR 적용 실험결과와 실제 압력용기를 대상으로 MSR을 자체 제작된 기술절차서에 따라서 시행하고 MSR의 적용성에 대해서 검토하였다.
PDF

Pedagogical Effect of Learning-Teaching Module of Unit for the Logarithm According to Historico-Genetic Principle (역사발생적 원리에 따른 교수학습 모듈을 적용한 수행평가의 교수학적 효과 분석)

Kim, Bu-Mi;Jeong, Eun-Seun;An, Youn-Jin
- School Mathematics
- /
- v.11 no.3
- /
- pp.431-462
- /
- 2009
Introduction of logarithm in mathematics textbook in the 7th national curriculum of mathematics is the inverse of exponent. This introduction is happened that students don't know the necessity for learning logarithm and the meaning of logarithm. Students also have solved many problems of logarithm by rote. Therefore, we try to present teaching unit for the logarithm according to the historico-genetic principle. We developed the learning-teaching module of unit for the logarithm according to historico-genetic principle, especially reinvention for real contexts based RME. Loaming-teaching module is carried out as the performance assessment. As a results, We find out that this module helps students understand concepts of logarithm meaningfully Also, mathematical errors of logarithm is revised after the application of learning-teaching module.
PDF

Voltage Sag-Swell Generator for Power Quality Disturbance of Dynamic UPS System (다이나믹 UPS 시스템의 전력품질 외란발생을 위한 전압 Sag-Swell 발생기)

Byeon W. Y.;Kim J. W.;Lee K. S.;Nho E. C.;Kim I. D.;Chun T. W.;Kim H. G.
- The Transactions of the Korean Institute of Power Electronics
- /
- v.10 no.1
- /
- pp.102-107
- /
- 2005
This paper describes a new voltage sag-swell generator for the test of custom power devices such as UPS, DVR, DSTATCOM, SSTS, etc. Voltage sag, swell, outage, and unbalance generation mechanism and the operating principle are described for the proposed scheme. The usefulness of the scheme is proved through simulations and experiments. The proposed scheme has good features of simple structure, high reliability, wide range of sag and swell variation, and easy control. Especially, the scheme can provide a cost-effective implementation of a power quality disturbance generator. Therefore, it is expected that the scheme will contribute to the self implementation of the system with low cost in laboratory.
PDF KSCI

Efficiency Analysis of Thermal Transpiration According to Back Pressure under Vacuum Condition (진공환경에서 열적발산원리의 배압에 따른 효율분석)

Jung, Sung-Chul;Huh, Hwan-Il
- Proceedings of the Korean Society of Propulsion Engineers Conference
- /
- 2007.11a
- /
- pp.76-79
- /
- 2007
From the previous researches about flow characteristic of micro-nozzle， we found that viscosity and back pressure induced heavy losses in micro nozzle. To overcome thess losses, we began to study new conceptual micro propulsion system that is thermal transpiration based micro propulsion system. It has no moving parts and can pump the gaseous propellant by temperature gradient only (cold to hot). Most of previous research on thermal transpiration is in its early stage and mainly studied for application to small vacuum facility or gas chromatography in ambient condition using nanoporous material like aerogel. In this study, we focus on basic research of propulsion system based on thermal transpiration using polyimide material in vacuum conditions.
PDF