• International Area Studies Review
• /
• v.22 no.1
• /
• pp.41-60
• /
• 2018

It is widely known that the increased productivity lead to a decrease in energy consumption. The policy for reducing energy consumption is also focusing on the improvement of firm's productivity. However, the issue of productivity dilemma phenomenon is recently raised in various fields. It is phenomenon that the increased productivity rather lead to a increased in energy consumption through a rise in output. This paper analyzed the presence of productivity dilemma in korean firm using Tang et al(2015)'s theoretical model. To closely analyze, I performed the analysis using 715 firms during 2011-2015 and estimated the model using system GMM to minimize the endogeneity. The results show that total effect of productivity had a significantly negative coefficient. It is implies that the increased productivity doesn't increase energy consumption. In other word, this paper could not identified productivity dilemma and so did in overseas investment firm and national firm cases.

• Journal of Environmental Impact Assessment
• /
• v.28 no.2
• /
• pp.83-100
• /
• 2019

This study, we conducted a non-parametric trend test (Seasonal Kendall tests, LOWESS) and Cross Correlation. We aimed to identify water quality trends using the weekly data for 9 variables (Water Temperature, EC, DO, BOD, COD, T-N, T-P, TOC and Chl-a) collected from 4 sites in the Paldang Lake from 2004.01 to 2016.12. According to the Seasonal Kendall test, Water temperature increased but EC, T-N and T-P decreased trend. LOWESS showed that BOD was gradually decreased from 2013 to 2016. but COD gradually increased between 2012 and 2016. As a result, it was confirmed that the period between 2012 and 2013 was a turning point in the increase of COD along with the decrease of BOD at all sites in Paldang Lake. Results of Cross Correlation showed that there was no time difference between all of Water variables and Sites. In this study, it is necessary to analyze the cause of the transition period and to monitoring the water quality more precisely for better water quality management in Paldang Lake.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.576-585
• /
• 2014

In this paper, we survey the Moving Target Indication(MTI) techniques for small UAVs. MTI consists of image alignment phase and frame differencing correction phase, and image alignment has two ways of parametric approach which is mainly focused in this paper and non-parametric approach. Since small UAVs are operated in the low altitude, the parallax is considerable and the epipolar geometry is applied to compensate the parallax. The related works and future works are presented.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.219-228
• /
• 2022

In order to improve audit quality, it is essential to understand the occurrence of disagreement between auditors and managers, and this study aims to analyze the impact of Business Strategies on audit risk and accounting audit delay. To this end, we conducted an empirical analysis using sample 2,910 firm-year data from 2018 to 2020 of KOSPI-listed and KOSDAQ-listed companies. The results of the empirical analysis of this study are as follows. First, compared to the companies of defender type, prospectors can expand audit procedures for new products, R&D costs, and intangible assets, and increase audit delays due to disagreement between managers and auditors. Second, compared to KOSPI-listed companies, the prospectors in KOSDAQ are more likely to have lower financial reporting quality, which further increases audit delays. The results of this study analyzed whether a company's Business Strategy affects the possibility of disagreement between an auditor and a company, and verified whether there is a difference in the audit report lag by stock market. The results of this study show that auditors' strong duty of care is needed for the companies of prospector type with high audit risk, and it is meaningful to present reinforced audit systems and specific guidelines for the companies of prospector type through the definition of prospector type. It also enables the expansion of research to identify the relationship between non-financial factors and audit risks that make up the companies of prospector type.

• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2000

We had investigated thermal stability, Ignition temperature and fire gas for polyurethane foams used for manikin, cushion and interior finishing material. Decomposition of polyurethane foams with temperature was investigated using a DSC and the weight loss with temperature increase using a TGA in order to find the thermal hazard of polyurethane foams, and the ignition temperature of polyurethane foams according to species. We studied constant temperature among ignition temperature measuring methods. In addition, noxious gases for polyurethane foams according to combustion condition were analyzed using gas analyzer and GASTEC. As results, initial decomposition temperature of polyurethane foam used for interior finishing material was lower than those for manikin and cushion, and exothermic energy was higher. Ignition temperature of polyurethane foam of interior finishing material was $420^{\circ}$. All of combustion forms at $427^{\circ}$ and under were smoldering combustion, and it was combustion at $500^{\circ}$. As furnace temperature was increased, concentration of noxious gases such as carbon oxide, carbon dioxide, and hydrogen cyanide was increased. And nitrogen oxide at combustion condition($500^{\circ}$) was over 10 ppm.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.25-30
• /
• 1998

Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.

• Journal of Environmental Policy
• /
• v.9 no.1
• /
• pp.57-81
• /
• 2010

Since the Republic of Korea is highly dependent on fossil fuels despite high oil prices, it urgently needs to renew its economic and social system to cut carbon emissions and achieve green growth. Therefore, reforming or eliminating subsidies related to the use of fossil fuels is a timely and oppropriate policy recommendation for Korea. It would be a win-win deal for Korean society as it would not only reduce the use of environmentally harmful fossil fuels but also enhance economic efficiency. In particular, cross-subsidies for industrial, agricultural and night thermal-storage power services make up more than 80 percent of all subsidies provided to the entire electric power industry sector of Korea. Of these cross-subsidies, this paper analyzes the electricity subsidy for industries, which takes up the largest share (about KRW 1.6583 trillion yearly), among the environmentally harmful subsidies in the electric power sector. Thus, the paper focuses on the analysis of ripple effect anticipated when this is reformed. To examine the effects of this subsidy reform, price elasticities were estimated using the ARDL (autoregressive distributed lag) model and quarterly data from 1990 to 2007. The main results of this study show that 1) annual energy demand for electric power in the industrial sector would drop by 12,475,930MWh and 2) $CO_2$ emissions would plummet by 2,644,897 tons per year if the subsidy were reformed. We can deduct from this that the abolition of environmentally harmful subsidies in the electric power sector in the Republic of Korea would considerably contribute to $CO_2$ emissions abatement in the country.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.197-202
• /
• 2001

The influence of thermal treatment and cold drawing was investigated for poly(ethy1ene terephthalate) films fabricated with various experimental conditions. Samples were elongated at room temperature under stepwise-drawing condition with the cross-head speed kom 0.5 to 500 mrdmin in an universal tester. Stress oscillation was observed in the stress-stnin curve of the samples heat-treatd at 50, 72 and $129^{\circ}C$ for 30 min, but it was not observed in the samples heat-treatd at $83^{\circ}C$ for 30 min. Thermal analyses of the samples were carried out in differential scanning calorimeter at the heating rate df $10^{\circ}C$/min/min, and the glass transition temperature, crystallization peak, enthalpy of fusion and degree of crystallinity were measured. The dynamic mechanical analyses of the samples were also carried out in a multiplefimction internal kiction pendulum at 1 Hz with the heating rate of $1.5^{\circ}C$/min, and it was found that the elastic modulus increases in the order of non-treated, heat-treated, and elongated samples.

• Explosives and Blasting
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2008

In case of estimating the shocking vibration during the blasting demolitions, the weight and falling height of the structure, that is a potential energy, had been considered. But, this study presented a new equation which used the impulse concerning a falling weight instead of potential energy as a method of predicting the shock vibration. In this experiment, the data of the impulse were compared with the data of the potential energy by performing the free-fall, and all data were comparatively analyzed by the regression analysis method. Also, the method of the superposition theory, which is calculated by the diminution ratio according to distance, the free-fall difference according to height, and the time giving the shock to the ground according to the breakdown pattern, was compared with the previous vibration data occurring from the blasting demolitions in the same conditions. As a result, this study suggests that the impulse and the method of superposition theory be applied as a method of predicting the shocking vibration. Therefore, these results could be expected to estimate the shocking vibration more accurately than the previous method.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.63-71
• /
• 2012

Depth understanding is important for stereoscopic and various methods including space design and cognitive science should be taken account in contents production. Among them, human scientific engineering such as human factor needs to be touched. More specifically, when the stereoscopic designer determines a binocular disparity, the viewpoint of the camera has to be matched with that of the audience. In this process, the structural problem by the distortion due to the dichoptic error is happened, Therefore, 3D sweetening process based on geometric re-analysis and human scientific engineering to minimize the visual fatigue is significant. This paper analyzes the inconsistency problems of the viewpoint in stereoscopic images, and we produce the stereoscopic image contents based on human factors.