• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.150-152
• /
• 2008

사회가 발달하여 감성사회로 접어들면서, 섬유산업도 새로운 감성소재를 개발하기 위한 연구를 추구하고 있다. 이러한 분야의 연구수단으로 생체모방(Biomimetics)을 활용하는 연구개발이 활발히 진행되고 있는데, 이중 미래지향적인 차세대 섬유로 Morphotex(R)를 이용한 Morpho 직물이 있다. 감성소재분야에서 '구조발색섬유'라고 불리어지는 독특한 색미를 가진 섬유소재인 Morphotex$^{(R)}$는 남미의 MORPHO 나비 날개의 구조적 발색원리를 모방하여 만든 광발색섬유로 염료와 안료를 사용하지 않는 친환경섬유이면서 고기능성과 쾌적성을 겸비한 소재로 요즘 많은 각광을 받고 있다. 본 연구에서는 구조발색 소재를 이용하여 제직한 감성의류소재 직물의 감량조건에 따른 감성특성을 비교.분석해보았다. 먼저 구조발색 소재로 제직 된 직물의 감량공정특성에 따른 구조발색 소재 직물의 인장 인열 특성을 분석하였으며 또한 KES-FB system으로 구조발색 소재 직물의 역학특성을 측정하고 측정한 역학특성으로부터 감성태를 평가해 보았다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.59-60
• /
• 2008

본 연구는 섬유의 구조적, 광학적 설계에 의해 빛의 간섭현상을 이용하여 색을 발현하는 구조발색 의류소재의 개발을 위하여 삼각단면의 구조발색섬유를 방사하고 직물을 제직한후 온도와 시간에 따른 삼각단면 섬유소재의 감량조건을 달리하여 그에 따른 $Prism^{(R)}$ 의류용 직물의 역학물성 및 태 특성을 측정하였다. 역학물성에는 인장특성, 인열특성을 측정하였으며 KES-FB system을 이용하여 역학물성을 측정 후 Hand value를 산출하였다.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.275-280
• /
• 2014

Because ammonia in water body can cause water pollution as a result of generating ammonium ion, it is of importance in the management of water quality. This work performed to analyze the ammonium ion by measuring the color band length on the basis of modifying the indophenol method. When 1-naphthol was employed as a coloring agent, the maximum absorbance was shown near 720nm, where the proper injection was in the range of 0.5-1.5ml. About 80% of absorbance was observed after the color development was made within the 20 minutes. In the manufacturing of coloring agent, the proper concentration of NaOH was 1.5-2.5M, and the effect of pH on the color development is negligible. In addition, the color development was effectively in the region of room temperature.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.141-148
• /
• 2012

This study investigated the structural coloration and fabric hand of the caustic reduced fabrics for emotional garment using structural color yarns, which was spun by 37 alternating nylon and polyester layers capable of producing basic colors using biomimetic technology. The colorations of the three kinds of structural color yarns were confirmed using multi angle spectro-photometer, and their triangular cross sections composed with 37 alternating nylon and polyester layers were measured using SEM and were discussed with layer length in relation with coloration and spinning conditions were also set up. The apparent color difference and reflectance of the three kinds of fabrics with different density and weave pattern were analysed as ranging from 400nm to 700nm. The optimum fabric structural design which is made by warp and weft densities(194ends/in ${\times}$ 105picks/in) and caustic reduction condition by $100^{\circ}C$ temperature and 60minutes with NaOH, 20g/l solution were decided through analysis of the mechanical properties and fabric hands of these three kinds of fabrics treated with 3 kinds of the caustic reduction conditions. And it was shown that the rate of caustic reduction was increased from 13% to 23% with increasing temperature and time of caustic reduction. The extensibility, bending rigidity and shear modulus of caustic reduction treated fabrics were decreased by treatment of caustic reduction, on the other hand fabric compressibility was increased. And it was shown that the hand value of specimen number one which was treated with temperature $100^{\circ}C$ and time 60minute was the best and the hand of this fabric was better than that of Morpho $fabric^{(R)}$ made by Teijin co. Japan.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.253-259
• /
• 2018

To determine the depth of preservative penetration in ACQ treated wood, the degree of penetration of Cu was measured. In this study, we developed a DDAC coloring method to investigate the penetration depth of DDAC, which is one of the active ingredient of ACQ, into wood. The following conclusions were obtained. The DDAC component reacts with a 2', 7'-dichlorofluorescein indicator and results in a deep orange color. This orange coloring reaction appears not only in DDAC solutions but also in ACQ treated wood tissues in which DDAC is present. It is possible to visually verify that DDAC has better wood penetration than Cu in the spruce, which is an refractory wood species, by the DDAC coloring method developed this study. In addition to the results, it is necessary to investigate the difference in penetration of Cu and DDAC for other wood species with poor preservative penetration.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.138-140
• /
• 2008

현재 현수막의 코팅에서 기능을 부여하는 수요가 늘고 있다. 본 실험에서는 코팅제의 유기용제 사용으로 인한 환경오염 문제및 폐기물 처리비용 부담을 줄이기 위하여 수성코팅제를 개발하려한다. acryl binder, 탄산칼슘, silica, 유화제등을 혼합한 코팅제를 knife coating한 후 170$^{\circ}C$로 1분 30초간 열처리 하였다. 이때 acryl binder의 첨가비율은 35${\sim}$55%로 변화를 주었다. 처리한 폴리에스테르에 DTP printing을 한 후 CCM 측정, 내수성, 접착성을 알아본 결과 acryl binder의 첨가비율은 45%일때 가장 우수한 발색성 및 printing 특성을 나타내었다. 기존 수성코팅제에 대비 20${\sim}$30% 발색성이 개선되었다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.522-530
• /
• 2001

발굴된 과거 고려청자의 화학성분조성과 물리적 특성에 대한 평가를 하고 미량성분의 청자의 발색에 미치는 영향을 고찰한 결과, 고려 청자 태토는 Fe$_2$O$_3$가 2%, TiO$_2$가 0.8% 함유되어 있었으며, 청자유는 석회.장석유로서 Fe$_2$O$_3$가 1.0~1.2%, TiO$_2$가 0.16% 포함되어 있었다. 비색청자의 경우 미량성분인 MnO$_2$가 P$_2$O$_{5}$의 함량이 0.37%와 0.76%, CuO는 300~500ppm 정도 함유하고 있었다. 반사율 측정 결과 일반적인 청자가 540~570nm의 장파장대에서의 반사율이 급격히 떨어지는데 반하여, 13세기 비색 청자의 것은 적색 파장대에서 10%이상 높았다. CoO는 미량 첨가로도 유약의 청색 파장대 반사율이 높고, 적색 파장대의 반사율이 급격히 떨어지며 청자 발색에 부정적인 영향을 미쳤다. CuO는 0.05%를 첨가했을 경우 적색 파장대에서 반사율 곡선이 높게 나타나고 있어 비색 청자발색에 효과적이었다. 또한 명도를 나타내는 L*값도 CuO가 첨가된 유약이 가장 높았고, 비색청자의 색상은 녹청자에 비해 맑고 깊은 색감을 보였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.114-119
• /
• 1998

Intensity and stability of the blue color of phospho-molybdate complex in P analysis are known to be influenced by the matrix, reducing regent and acidity of the extractants. Objective of this research was to compare the efficiency of the color-developing reagents for P concentrations in distilled water and extracts of Lancaster, Mehlich II, and Mehlich III methods. Efficiencies on which to base this study were evaluated by the optimum ranges of P, reproducibility of calibration curve and stability of the developed color. Color-developing reagents employed were ammonium molybdate-1,2,4- aminonaphtholsulfonic acid (ANS), ammonium molybdate-ascorbic acid-bismuth subcarbonate (AB), and ammonium molybdate-ascorbic acid-antimony potassium tartarate (AA). The ANS revealed the lowest sensitivity but the widest ranges for P concentrations in color development. On the other hand, the AA bore the narrowest color-developing ranges and its sensitivity was similar to AB. However, at P concentrations lower than $0.5mg\;L^{-1}$, AA was more sensitive than AB. Based on the data on the ranges of calibration curve, stability of color and reproducibility of analytical data. AA reagent was considered to be suitable for the determination of P in distilled water and AB reagent was practically recommendable for soil P analysis in extracts by Lancaster, Mehlich II, and Mehlich III procedures.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.406-412
• /
• 1989

Indirect photometric detection of aliphatic compounds such as alcohols, ketones and esters was investigated in high-performance liquid chromatography, These samples possessing nonchromophore or weak chromophore could be indirectly detected by a UV detector with addition of UV absorbing, p-chlorophenol or p-nitrophenol in mobile phase as detection reagent, and submicrogram detection limits were achieved. Some mixtures of samples were also able to be separated and quantitated with good resolution and comparatively high sensitivity under optimum conditions.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.140-150
• /
• 1996

To develop a home-version assay system for plasma lipoprotein cholesterol, variables that can control the assay performance were optimized. The system was constructcd by using two major components: nitrocellulose membrane strip with immobilized enzymes (cholesterol esterase, cholesterol oxidase, and horseradish peroxidase); and sample carrier solution containing non-ionic detergent (Triton X-100) and chromogen (3,3'-diaminobenzidine). Once a sample combined with the carrier was absorbed from the bottom of the strip, cholesterol was delivered by capillary action to the immobilized enzymes and a sequential reactions took place. In the final reaction, the chromogen was oxidized and then generated a color as signal that was proportional to the concentration of cholesterol. The signal intensity was enhanced by optimizing conditions for the immobilization of enzymes and the chemical composition of carriel. Under these conditions, a dose-response curve was obtained and revealed a high sensitivity enough to measure the cholesterol in blood.