• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.365-371
• /
• 2013

This study describes impact test methods for a rolling-stock windscreen executed in Korea and Europe. Air-pressurized impact test equipment for the front windscreens of high speed trains was designed and manufactured. The equipment is capable of launching a projectile at 500km/h, in accordance with EN 15152's impact test method. Calibration of the test equipment was conducted to find an equation relating air pressure and projectile velocity. Specimens ($1000mm{\times}700mm$) having similar specifications with the front windscreens in metro and conventional trains were used to conduct impact tests with this equipment to research the impact characteristics of the screens according to the impact velocity.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.152.2-152.2
• /
• 2012

우주발사체 발사를 위해서는 발사대시스템 개발이 필수적이다. 발사대시스템은 기계설비와 추진제공급설비, 관제설비로 구성되며, 그 중 기계설비는 발사지지대(Launch Pad), 이렉터(Erector), 트랜스포터이렉터(Transport-Erector), 케이블마스트(Cable-mast), 자동체결장치(Auto-coupling Device) 총 다섯 부분으로 나눌 수 있다. 발사지지대는 발사 전까지 발사체를 지지하는 구조물로 발사체의 안전을 보장하고 공급배관 및 통신라인의 경로를 제공한다. 이렉터는 발사준비과정에서 수평으로 이송된 발사체를 2개의 대형 유압실린더를 사용하여 기립시키는 장비로 발사 취소 시 발사체를 수평으로 전환한다. 트랜스포터이렉터는 조립공간에서 조립을 마치고 최종점검이 완료된 발사체를 전용차량을 이용하여 발사대로 이동하고 발사체를 안전하게 잡아준다. 자동체결장치는 지상으로부터 발사체로 연결되는 추진제, 압축가스 등의 연결배관을 자동으로 연결/분리하는 장치이다. 케이블마스트는 우주발사체 상단부의 UCU-E(Umbilical Connectors Unit-Electrical)를 통해서 전기, 고압가스, 고온공기 등을 공급하기 위한 통로로 발사 전까지 발사체시스템과 지상장비와의 통신수단이다. 또한 발사체로 연결되는 라인들을 발사 시에 나오는 후류에 의한 충격으로부터 보호하고, UCU-E가 기계적으로 분리되도록 구성되어 있다. 본 논문은 기존에 적용된 케이블마스트에 대한 구성, 기능 및 운용절차에 관한 것으로, 현재 진행 중인 한국형발사체 개발을 위한 기초 자료조사로 활용하고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.62-70
• /
• 2007

The aiming ability is a to improve accuracy performance of the firing vehicle. This paper describes the detection method of chatter vibration using disturbance acceleration in the pointing structure. In order to analysis vibration trends of the pointing system occurred during vehicle drive, acceleration data was processed by using data processing algorithm with moving average and Hilbert transform. Specific mode constants of acceleration were obtained under various disturbances. Vehicle velocity, road condition, property of pointing structure were considered as factors which make change of vibration trend in vehicle dynamics. Finally, back propagation neural networks have been applied to the pattern recognition for the classification of vibration signal in various driving conditions. Results of signal processing were compared and analysed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.316-325
• /
• 2015

This paper describes the design guide and its assessment process to be applied to the launcher vehicle exterior design. A launcher vehicle design is required to meet three kinds of design attributes; symbolic quality, usability, and aesthetic quality. The launcher vehicles referred to in this paper are assessed by the elements in the guidelines. A set of assessment process and methods is derived to evaluate how well the three design attributes are applied in the actual launch vehicle design. An example of assessment is shown at the last part of this paper. By this way designers can take various criteria into account integratively and select the final design. High design satisfaction and pride of the operators and the nation can be assured in the end.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.79-80
• /
• 2012

본 연구는"경찰장비 관리 규칙" 및 "경찰장비의 사용 등에 관한 규정"에 따른 경찰장비 가운데 차량의 합리적 운용과 관리를 위한 제언을 목적으로 한다. 그런데 "경찰 장비관리 규칙" 제2조(정의) 제4항은 "경찰장비란 무기, 경찰장구, 최루제 및 그 발사장치, 과학수사기구, 해안감시기구, 정보통신기기, 차량 선박 항공기 등 경찰의 직무 수행을 위해 필요한 장치와 기구를 말한다".고 규정하고 있다. 이를 보면 경찰장비의 범위가 비교적 넓으며 그 종류도 다양하다는 것을 알 수 있다. 그러나 본 연구에서는 연구의 편의와 한계 등을 고려하여 경찰장비 가운데 기동장비인 차량, 항공기, 선박, 자전거 중에서 차량에 한정하여 연구의 대상으로 삼았다. 경찰장비관리규칙 제87조(정의) 제2항은 "차량이란 자동차와 원동기를 장치한 이륜차를 말한다"고 규정하고 있다. 그런데 경찰에서 사용하고 있는 차량의 대부분은 자동차이므로 본 연구도 자동차를 연구의 대상으로 "경찰장비 관리 규칙" 상의 문제제기에 한정한다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.86-91
• /
• 2012

This paper described validation results of COMS Ka band antennas beam coverages which were developed by ETRI. After satellite launch, In Orbit Test(IOT) activities are stat to check spacecraft and payloads are still in healthy condition after launch. During IOT phase, ETRI measured radiation patterns of COMS Ka band antennas and compare with ground test(CATR) results. The antenna patterns similarity between IOT results and CATR results show that COMS Ka band antenna withstand launch vibration and in the good healthy condition. After IOT, ETRI performed field test for beam coverage measurements with vehicle to check if Ka band beam coverage are formed well as designed. For the beam coverage measurement, 17 points were selected over the Korean peninsula. The field measurement data were very similar with CATR data and this confirms that beam coverage are formed well over the Korean peninsula as expected.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.611-615
• /
• 2015

Anti-aircraft gun system is used for low-level air defense system and has more than twin guns with high firing rate in order to maximize the capability of defense. Gun's vibration and bullet's variance has a critical effect on accuracy and hit probability of weapon system such as anti-aircraft gun system with high firing rate. Typical mechanism to reduce the amount of vibration and shock during gun-fire process is very important design factor. In this paper, the suspension characteristics of the vehicle are studied for the improvement of isolating performance of gun firing system with high firing rate. Gun fire test for the vehicle is conducted and computational models using Recurdyn and Adams are created based on test results. Through this study, results of computational analysis are compared with the real test results, which includes type, location and quantity of suspension and gun mechanism are selected for anti-aircraft gun. From the result of this study, we could make basic design and consider the proper component of the system such as suspension and gun spring.

• Defense and Technology
• /
• no.10 s.224
• /
• pp.76-87
• /
• 1997

박격포는 성능과 전술적 관점에서 20세기말에 괄목할만한 발전을 하고 있다. 대구경화 및 사거리 신장, 신소재에 의한 경량화, 스마트탄 개발, 신관 및 유탄의 개발, 차량 탑재화로 신속한 기동, 사격통제시스템의 발전 등으로 시험사격 없이 초탄에 바로 정확한 효력사를 발사할 수 있으며, 미리 선정된 사격진지로 포탑화 장갑 박격포 시스템으로 신속한 기동이 가능하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.443-450
• /
• 2020

This paper reports a design improvement study to solve the stoppage phenomenon caused by the launch-support device applied to K105A1. The K105A1 is a weapon system equipped with an old 105 mm towed howitzer in a wheeled vehicle, which provides superior maneuverability compared to track equipment. The launch support device serves to withstand fire impact and load. In this way, this device is fixed firmly to the ground in preparation for the shooting mission and is responsible for the critical performance, such as fixing the position of the vehicle. On the other hand, during the field test, a temporary stoppage of the launch support occurred, which caused a problem of not being fixed to the ground. To solve this problem, the cause of failure was analyzed by a replay test and parts inspection. In addition, the operating concept, method, and design were analyzed to derive the cause and solve the problem by changing the parts design. Finally, the performance and firing missions were performed normally by applying the changed design to K105A1. The performance stability and reliability of the launch support device were confirmed, which are expected to be of great assistance in the development of military equipment in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.229-236
• /
• 2016

For this research, the trajectory of a projectile was simulated via the multibody dynamics analysis of a self-propelled mortar. The dynamic model was composed of a mortar model and a vehicle model, and was simulated using the RecurDyn program. Interior ballistic was applied to the mortar model, and exterior ballistic was conducted by Matlab using the simulation results of the interior trajectory. Through repetitive Monte-Carlo simulations, the accuracy of the mortar was analyzed by considering variations in the aiming angle and vehicle dynamic response.