• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.623-629
• /
• 2017

Flow structure and mixing characteristics in a micro combustor with a multi-hole baffle were numerically studied using the Reynolds stress model. The multi-hole baffle has geometrical features to produce multiple three-dimensional vortices inside combustion chamber. When the thickness of the baffle's geometrical factors changes, variations of vortical structures occur variously. Among these vortices, the vortex generated from the fuel stream exerts a critical influence on the mixing enhancement. The three-dimensional vortical structure, in its development state, was strongly dependent on the baffle thickness. In particular, as the baffle thickness decreases to values less than the diameter of the fuel hole, the jet stream in baffle holes changes from the parabolic to saddleback profile type. The sizes of recirculation zones inside combustion chamber and the mixing state were closely affected by the structure of the jet streams.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.232-241
• /
• 2011

The hybrid rocket shows interesting characteristics of complicated mixing layer developed by the interaction between turbulent oxidizer flow and injected surface mass flow from fuel vaporization. In this study, the compressible LES was conducted to explore the physical phenomena of surface oscillatory flow induced by the flow interferences in a duct domain. From the numerical results, the wall injection generates the stronger streamwise vorticites and the negative components of axial velocity accompanied with the azimuthal vorticity near the surface. And the vortex shedding with a certain time scale was found to be developed by hydrodynamic instability in the mixing layer. The pressure fluctuations in this calculation exhibit a peculiar peak at a specific angular frequency($\omega$=8.8) representing intrinsic oscillation due to the injection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.986-993
• /
• 2018

Lateral thrust jet has better maneuverability performance than the control surface like the conventional fin for attitude control or orbital transition of guided weapons. However, in the supersonic region, a jet interaction flow occurs due to the lateral thrust jet during flight, and a complicated flow structure is exhibited by the interaction of the shock wave, boundary layer flow, and the vortex flow. Especially, hit-to-kill interceptors require precise control and maneuvering, so it is necessary to analyze the effect of jet interaction flow. Conventional jet interaction analyses were performed under low altitude conditions, but there are not many cases in the case of medium altitude condition, which has different flow characteristics. In this study, jet interaction flow analysis is performed on the lateral jet controlled interceptor operating at medium altitude. Based on the results, the structural characteristics of the flow field and the changes of aerodynamic coefficient are analyzed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1594-1600
• /
• 2011

Recently developed FDS5 CFD code has employed a near-wall flow treatment method which is Werner-Wengle wall law provided by NIST(National Institute of Standards and Technology). In this study, the wall law has been verified against DNS(Direct Numerical Simulation) data in the parallel plate. The $y^+$ was kept above 11 to fulfill the near-wall flow requirement in the grid generation. The total grid was $32{\times}32{\times}32$. The boundary condition for inlet and outlet was periodic condition and for both side, symmetric condition was used. The fully developed turbulent flow was generated and Re = 10,700. The simulated results were compared with DNS data. RANS results were also used for verification.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.63-72
• /
• 1997

본 논문은 분사제트 주위에 형성되는 와류를 조절하여 제트를 제어하기 위하여 유동가시화, 속도분포 및 난류성분을 측정하는 실험을 수행하였다. 와류를 조절하기 위한 방법으로 제트노즐 주위에 환형관을 설치하여 환형관으로부터 2차제트를 분사 또는 흡입함으로써 제트주위에 형성되는 전단류를 변화시켰다. 2차제트 분사시 주제트 주위에 형성되는 와류의 발달을 억제함으로써 제트 포텐셜코어의 길이가 아주 길어지는 제트유동을 얻을 수 있었다. 환형관으로부터 주제트주위의 유체를 흡입하는 경우 제트주위의 전단류가 흡입비 R=1.3∼l.65에서 대류불안정성에서 절대불안정성으로 바뀜으로써 형성된 와류가 하류에서 제트중심부까지 발전, 결합되는 것을 방지하여 더 긴포텐셜코어와 중심에서 낮은 난류강도를 얻었다. 위의 결과는 환형관 주위에 부착한 깃의 높이 변화에 따라서 변화하였는데, 이것은 깃이 환형관을 통한 흡입유동의 유로역할을 함으로써 제트밖으로부터 흡입되는 것을 방지할 수 있었다. 분사제트 벡터링을 위하여 제트노즐 주위의 환형관을 이등분하여 한쪽으로만 제트주위의 유동을 흡입함으로써 제트주위에 다른 전단류를 형성함과 동시에 Coanda효과를 이용하여 분사제트를 편향시켰다. 편향되는 정도 및 난류성분은 홉입속도 비에 따라서 크게 바뀌었다.

• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.299-305
• /
• 2002

The present experimental and numerical investigations are performed on the characteristics of transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin-friction coefficients have been measured for the fully devel-oped flow of water and that of 0.2％ CMC-water solution at a inner cylinder rotational speed of 0∼600 rpm, respectively. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually decreased for turbulent flow regime.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.40-48
• /
• 2003

Large eddy simulation is used to investigate the compressible flow over a open cavity, The sub-grid scale stresses are modeled using the dynamic model. The compressible Navier-Stokes equations are solved with the sixth order accurate compact finite difference scheme in the space and the 4th order Runge-Kutta scheme in the time. The results show a typical flow pattern of the shear layer mode of oscillation over the cavity. The votical disturbances, the roll-up of vorticity, and impingement and scattering of vorticity at the downstream cavity edge can be seen in the shear layer. Predicted acoustic resonant frequency is in good agreement with that of the empirical formula. The mean flow streamlines are nearly horizontal along the mouth of the cavity. The pressure has its minimum value in the vortex core inside the cavity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.88-88
• /
• 2019

컴퓨터 성능향상과 수치해석기법의 발달로 인해 Navier-Stokes 방정식에 기초한 수치모델을 활용한 3차원 유동/파동장 해석이 증가하고 있는 추세이다. 그러나 아직까지 Navier-Stokes 방정식 모델의 계산부하를 PC에서 소화하기에는 무리가 따른다. 게다가 실험실 스케일을 벗어나, 실제 현장을 계산영역으로 설정할 경우에는 계산량이 엄청나게 증가하게 된다. 이것을 극복하기 위해서는 반듯이 병렬계산을 수행하여야 한다. 본 연구에서는 계산부하가 큰 Navier-Stokes 방정식 기반의 3차원 수치모델 LES-WASS-3D를 활용한 대용량 병렬계산체계를 구축한다. 나아가 3차원 정밀 또는 광역의 유동/파동장 해석에 있어서 병렬계산체계의 성능과 적용성을 검토한다. 현재 보급되고 있는 PC들은 모두 멀티프로세서가 장착됨으로 손쉽게 병렬계산을 수행할 수 있다. 그러나 정밀 또는 광역해석을 위해서는 대용량 병렬계산 컴퓨터가 요구된다. 따라서 본 연구에서는 보조프로세서를 장착한 공유메모리 환경의 고성능 병렬계산체계를 구축한다. 나아가 포트란 기반의 순차코드로 구축된 기존 3차원 Navier-Stokes 방정식 모델 LES-WASS- 3D를 병렬코드로 변환한다. 병렬계산 성능 및 적용성을 검토하기 위한 수치해석을 수행한다. 이상의 과정을 통해 본 연구에서 구축한 병렬계산체계의 성능 및 적용성을 확인할 수 있었다. 그리고 3차원 유동/파동장 해석에 있어서 정확도 향상뿐 아니라, 계산영역을 확장할 수 있는 계기가 마련되었다. 또한 유동/파동 해석보다 많은 계산시간이 필요한 지형변동 해석에도 충분히 적용될 수 있다고 판단된다.

• Journal of Life Science
• /
• v.24 no.10
• /
• pp.1055-1062
• /
• 2014

We investigated the expression of cucumber genes involved in lipid mobilization and metabolism during cotyledon development to compare gene activity and to study the direction of carbon (acetyl unit) transport between glyoxysomes and mitochondria. The core metabolic pathway involving 10 genes was examined in four intracellular compartments: glyoxysomes (peroxisomes), mitochondria, chloroplasts, and cytosol. Additionally, we tested the early germination response of dark-grown seedlings and the immediate light response for a further 3 days. According to the reverse transcription polymerase chain reaction (RT-PCR), 3-L-ketoacyl-CoA thiolase 2 (Thio2), isocitrate lyase (ICL), and malate synthase (MS), the genes involved in storage lipid mobilization showed a similar and consistent pattern of gene expression in seedling development. Furthermore, coordinate expression of the A BOUT DE SOUFFLE (BOU) gene with ICL and MS during seedling emergence pointed to a possible secondary route of acetyl unit (acetyl-CoA) transport between peroxisomes and mitochondria in cucumber. The expression of the BOU gene was light dependent, as shown by BOU activity in Arabidopsis, suggesting that the dark condition also results in weak membrane biogenesis. In addition, several genes were active throughout the development of the green cotyledon, even during senescence. In conclusion, this study summarizes oil-seed germination and gene expression during cucumber cotyledon development and proposes an additional route for acetyl unit transport.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.1
• /
• pp.45-54
• /
• 1993

동심 이중관내에서 사각돌출형 조도요소에 의한 비대칭 난류유동과 열 전달특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 한쪽면에 거칠기가 있는 평행평판의 유동에 대한 수정 플란틀 혼합길이(mixing length)이론의 난류모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대속도지점에서 안쪽과 바깥쪽의 두 속도형상들은 힘의 평형에 의해 매치(match) 시켰다. 그리고나서, 온도 분포와 열전달 계수를 계산하였다. 속도형상과 마찰계수들의 해석결과는 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 조도비, 조도에 대한 피치비, 그리고 반경비등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정 임의의 조도 요소들이 전체적 효율 측면에서 볼 때 유리하게 열전달을 향상시킨다는 것을 증명하였다.