• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.347-356
• /
• 2006

In this paper, practical nonlinear inelastic analysis method of 3-dimensional steel structures accounting for gradual yielding with fibers on a section is developed. Geometric nonlinearities of member(p-$\delta$) and frame(p-$\Delta$) are accounted for by using stability functions. Residual stresses are considered by assigning initial stresses to the fiber on the section. The elastic core in a section is investigated at every loading step to determine the axial and bending stiffness reduction. The strain reversal effect is captured by investigating the stress change of each fiber. The proposed analysis proves to be useful in applying for practical analysis and design of three-dimensional steel frames.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.143-149
• /
• 2009

In this study, asphalt emulsion was manufactured by phase inversion emulsification method with nonionic surfactants(Span 80, Span 60, Tween 80, and Tween 60), anionic surfactant(SLS) and cationic surfactant(Imidazole) in different feeding ratio to make up for the week points of asphalt. Its stabilization was carefully investigated with respect to droplet size, viscosity, zeta potential, and water-proofing property. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of the asphalt emulsion was good. As the amount of the mixed surfactant was increased, the droplet size of asphalt emulsion were decreased, while the viscosity and zeta potential were increased. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of asphalt emulsion was good.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.286-288
• /
• 2008

본 논문은 낮은 입력 DC전압에서 높은 음의 DC전압을 출력하는 높은 전환 비의 극성 반전 형 DC/DC 전력 변환 회로에 관한 것으로써, 하나의 스위치, 하나의 인덕터, 그리고 다수개의 캐패시터와 다이오드로 구성된다. 기존의 극성 반전 형 DC/DC 컨버터 회로와 비교하여, 고압 변환 트랜스포머 대신에 인덕터를 사용할 수 있어, 자기 소자의 부피 및 크기는 물론 원가저감이 가능하다. 또한 자려 발진(Self Oscillation) 방식을 사용하여 별도의 제어 IC가 필요 없으므로, 회로구성이 대단히 간단하고, 저가격의 전원 회로를 만들 수 있다. 또한 다이오드들의 전압 스트레스가 감소하여 저가격 고성능의 고압 변환장치 구현이 가능하다. 제안된 회로의 동작원리를 설명하고, 타당성을 Simulation 및 실험을 통하여 검증한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.6
• /
• pp.23-31
• /
• 2010

It is necessary to develop reliable but simple analytical models to predict the nonlinear response of reinforced concrete wall structures. In this study, experimental results on the cyclic reversed lateral behaviors of reinforced concrete shear wall assemblages are simulated analytically by using the wall, beam, and column models available in the PERFORM 3D program. Through the comparison of experimental and analytical results, the reliability and limitations of the analysis are evaluated. In addition, the information, which could not be obtained experimentally, such as the internal flow of force, the contribution of the flange walls, and the resisting mechanism of the walls with the contribution of the coupling beam, is provided.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.161-168
• /
• 2009

We demonstrated $\check{S}$olc-type wavelength filters in periodically poled Ti-diffused lithium-niobate channel optical waveguide (Ti:PPLN). A $\check{S}$olc-type transmission spectrum based on the polarization-mode conversion was observed experimentally in PPLN with period 16.6${\mu}m$. A reasonable explanation of such a phenomenon was presented. A polarization-mode converted transmission peak was observed at wavelength 1272.49nm. The FWHM and sidelobe of spectrum are about 0.23nm and 7 dB, respectively.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.166-168
• /
• 2003

By using gain saturation of semiconductor optical amplifiers (SOAs), an all-optical AND gate at 10 Gb/s has been successfully demonstrated. Firstly, Boolean (equation omitted) has been obtained using the first SOA with signal B and clock injection. Then, the all-optical AND gate is achieved using the second SOA with signals A and (equation omitted) injection.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.125-131
• /
• 2017

In order to develop test and performance analysis techniques for a CRP propulsion, a CRP dynamometer which can be installed inside the model ship was designed and manufactured. The object ship was the 16000TEU container carrier, which has test results for the single propeller. The design concept of the present CRP is that forward & after propellers have the same power ratio and their RPM ratio is 0.75:1. To begin with, we checked the performance of the CRP dynamometer through the calibration and then installed it inside the model ship. After the model ship setup including the design CRP and the rudder in the Large Cavitation Tunnel(LCT), a series of model tests composed of power ratio check, propeller behind wake(PBW) test, cavitation observation and pressure fluctuation tests was conducted. Through the model test and data analysis for CRP, the experimental technique was established and the improved method for CRP design was suggested.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.311-318
• /
• 2020

This study investigates the performance and blade airloads for a rigid coaxial rotor of high-speed compound unmanned rotorcrafts. The present compound unmanned rotorcraft uses not only a rigid coaxial rotor, but also wings and propellers for high-speed flights. For the rigid coaxial rotor in this work, CAMRAD II, a rotorcraft comprehensive analysis code, is used to study the performance at a flight speed of up to 250 knots and blade section lift forces at 230 knots. As the flight speed increases, the rotor power decreases; however, the power of propellers increases to overcome the drag force of a rotorcraft in high-speed flight. The effective lift-to-drag ratio of a rotor has the maximum value of about 11.6 which is much higher than the value of the conventional helicopter. The blade section lift forces of the upper and lower rotors at 230 knots show the similar variation trends for one rotor revolution, and the impulses because of the aerodynamic interaction between both rotors are observed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.389-389
• /
• 2023

우리나라는 농업 산업화의 발달로 인하여 농업용수, 공업용수, 생활용수 사용이 증가하며, 하천에서 직접 물을 취수하여 사용하고 있고 이용 후 생활용수, 농수로 등을 통해 회귀되는 유량이 많아 하천의 유출 특성을 파악하는데 어려움이 있다. 따라서 정확한 하천 유출 체계 특성을 파악하기 위해서는 하천에서 사용되는 물의 이용 특성에 대하여 파악할 필요가 있다. 본 연구에서는 길안천에 운영되고 있는 취수 시설에 대해 문헌조사와 현장조사를 진행하였으며, 조사한 자료를 토대로 하천의 물 사용 체계 모식도를 작성하였다. 길안천 유역의 조사 구간은 대사3교 하류에서 구)묵계교 상류까지 조사를 실시하였다. 문헌조사 대상시설은 취입보, 취수장 등이며, 조사대상은 하천의 유출특성에 영향을 줄 수 있는 시설로 길안천 유역에 영향을 주는 시설에 대해서만 수행을 하였다. 현장조사에서는 현장을 방문하여 취⋅배수시설의 위치 등을 조사하였다. 길안천은 농업용수와 생활용수 사용의 증가에 따라 상하류 측정유량의 반전이 빈번하게 발생하였으나 유출체계 분석을 통해 고려한 결과 안정적인 상하류 관계를 확인하였다. 결과적으로 본 연구를 통해 하천 내 취⋅배수시설 영향에 따른 유출 특성을 고려하여 자료를 검토한 결과 길안천 유역 내의 상하류 유량 반전 시기가 과거에 비해 감소하였으며, 안동시(대사3교)관측소와 안동시(묵계교)관측소 구간의 취⋅배수영향을 고려하여 산정한 유출률을 기존자료와 비교한 결과 일정한 손실고가 유지되는 안정적인 결과를 도출하였다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.293-297
• /
• 2016

This study was conducted to determine the effect of rainfall after cutting on nutritive value of Italian ryegrass (Lolium multiflorum) hay. Fresh Italian ryegrass was treated with 3 days natural rainfall (56.5, 14.0 and 1.6 mm) after cutting without tedding. Rainfall effect on Italian ryegrass quality was evaluated based on Neutral detergent fiber (NDF) and acid detergent fiber (ADF), crude protein (CP), crude fat (CF), crude ash (CA) and non-fiber carbohydrate (NFC). The quality of Italian ryegrass was decreased with extending raining days. The content of neutral detergent fiber (NDF) was increased from 0.4 to 4.7% by 1 day advancement in raining. CF content was decreased from 8.1 to 32.8%. CP and CA contents did not change, but NFC content was decreased from 0.5 to 8.4%. The quality damage by the number of raining days after cutting Italian ryegrass was the lowest on the first day from exposure to rain.