Transactions of the Korean Society of Mechanical Engineers A
/
v.34
no.1
/
pp.27-33
/
2010
This paper focuses on the design of microspeakers with minimum flux leakage, for use in radiotelegraphy. The response surface methodology (RSM) is applied as the optimization technique for obtaining a large magnetic force and a small flux leakage on diaphragm. The object functions of this optimization are the magnetic force and the flux leakage along three factors; pole piece thickness, magnet grade and yoke thickness, which are determined by the design of the experiment. The magnetic force and the flux leakage are calculated for each condition and optimized by results evaluated with RSM. For a pole piece thickness of 0.9 mm, a magnet grade of N42H and a yoke thickness of 0.75 mm, the magnetic force is satisfied as initial model and flux leakage is decreased to 11.8% than initial model.
Blood-sensitive reagents may exhibit false positives or negatives under the influence of substances other than blood. Since these reactions lead to the misinterpretation of blood evidence, it is essential to investigate the possibility of false-positive and -negative reactions of blood-sensitive reagents. Acidic hydrogen peroxide (AHP) is a recently discovered blood-sensitive reagent, and it is not yet known whether it causes false-positive or -negative reactions. To confirm this, 20 µL of blood was placed on metal surfaces, plastic surfaces, paper surfaces, paint surfaces, foods, vegetable oils, detergents, and petroleum hydrocarbons, and then AHP was applied. The blood was observed through an orange filter under a 505-nm light source, and no false-positive or false-negative reactions were observed with any of the substances/materials. However, it was confirmed that polyethylene terephthalate surfaces, polyvinylchloride surfaces, some paint surfaces, and foods exhibit their own photoluminescence under the conditions of blood observation, which interferes with blood observation.
Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
/
2003.04a
/
pp.123-123
/
2003
야채 soup mix의 제조조건이 야채죽의 물리적 및 관능적 특성에 대한 영향을 조사하였다. Soup mix의 제조조건인 주입액의 양 (쌀 무게에 대한 물의 체적 비), 버섯, 당근 그리고 대파의 첨가량(쌀 무게에 대한 잣의 무게 비)에 따른 물리적 특성과 관능적 특성의 변화를 모니터링 하고자 반응 표면분석법 (response surface methodology, RSM)을 사용하였으며, 이때 실험계획은 중심합성계획법을 적용하였다. 요인변수(Xn)를 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 이들 요인변수에 의해 영향을 받는 반응변수(Yn)는 야채죽의 물리적 특성으로 하여 회귀분석에 사용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system) program을 사용하였으며, 야채죽의 조리조건이 물리적 및 관능적 특성에 미치는 영향은 SAS program을 이용한 3차원 반응표면분석법으로 해석하였다. 야채의 배합비를 달리한 야채죽의 물리적 특성인 색도 L, a 및 b값에 대한 F-value는 자각 1.50, 11.75 및 5.58이고,유의수준이 각각 0.3044, 0.0019와 0.0169로서 a값과 b값의 유의성이 1% 수준에서 인정되어 이들 제조조건이 a값과 b값에 큰 영향을 미치는 것으로 나타났다. 점도와 퍼짐성에 대한 유의수준은 각각 0.6920과 0.7528이고, 반응표면회귀식의 $R^2$은 각각 0.4766과 0.4436으로 유의성이 인정되지 않았다. 고형분에 대한 유의수준은 0.2026이고 회귀식의 $R^2$는 0.7107으로서 버섯, 당근 및 대파 첨가량이 고형분의 변화에 영향을 미치지 않은 것을 알 수 있었다. 관능적 특성인 색상에 대하여 soup mix의 제조조건이 야채죽에 미치는 영향은 F-value는 6.23이고, 유의수준이 0.0124으로서 1%수준에서 유의성이 인정되었으며, 회귀식의 $R^2$은 0.8890이다. 향에 대한 유의확률은 0.4555이고 0.05이상이므로 유의성이 인정되지 않아 설정된 범위내에서 야채죽의 향에 대하여 크게 영향을 미치지 않는 것으로 나타났다. 점성에 대한 반응표면회귀식의 $R^2$은 0.8134로서 그 유의성이 5%수준에서 인정되었다. 맛과 전반적 기호도에 대하여 야채의 배합비에 따른 반응표면회귀식의 $R^2$은 각각 0.7374와 0.8651이며, 유의화률은 0.1578과 0.0228으로 나타나 전반적인 기호도에 대한 영향은 10% 유의수준에서 영향을 주었다. 결론적으로, 물리적 특성인 색도, 점성, 퍼짐성과 고형분의 함량은 관능적 특성인 색과 비교적 높은 정(正)의 상관을 나타내었으며, 관능적 특성인 향과의 상관은 유의성이 인정되지 않았다. 야채죽 제조를 위한 soup mix의 제조조건에 있어서 야채의 배합비는 색과 점성에 영향을 미치는 가장 주요한 조건이라고 생각된다.
Ha, Seok-Jae;Cho, Yong-Kyu;Cho, Myeong-Woo;Lee, Kwang-Cheol;Choi, Won-Ho
Journal of the Korea Academia-Industrial cooperation Society
/
v.13
no.10
/
pp.4378-4384
/
2012
In LED chip packaging, die bonding is a very important process which fixes the LED chip on the lead frame to provide enough strength for the next process. This paper focuses on the process optimization of a LED die bonding, which attaches small zener diode chip on PLCC LED package frame, using response surface analysis. Design of experiment (DOE) of 5 factors, 3 levels and 5 responses are considered, and the results are investigated. As the results, optimal conditions those satisfy all response objects can be derived.
충북 영동군 동창광산에서 산출되는 일라이트(illite)광선의 표면화학특성을 전위차 적정 실험과 FITEQL3.2 프로그램을 이용하여 연구하였다. 정량 Xtjs 회절 분석에 의한 일라이트 광석의 광물조석은 석영 46.6% 일라이트 41.6% 카올리나이트(kaolinite) 11.8%이며 $N_2$BET 방법에 의하여 구한 비표면적은 $6.52 m^2$g이다. 전위차 적정 실험결과를 그란(Gran)법을 적용하여 구한 일라이트광석의 영전하점($pH_{pznpc}$ )은 pH 3.9 총표면 자리 밀도는 21.24 sites/$nm^2$이다. 표면 복합체 모델중 일정 용량 모델을 적용해 일라이트 광석의 표변 특성에 알맞는 모델을 찾아보았다. 일라이트 광석의 표면을 사면체 자리와 팔면체 자리로 나누어 설정한 2sites$-3pK_{ a}$s 모델은 변수값이 수렴되지않았으므로 부적절하다고 판단된다. 일라이트 광석의 표면을 하나의 균질한 흡착표면으로 가정해서 설정한 1 site -1 $K_{a}$ 와 1 site -2 $pK_{a}$ s 모델 사이에는 뚜렷한 차이는 없지만, 1 site -1 $pK_{a}$ 모델의 WSOS/DF 값이 17, 1 site - 2 $pK_a{s}$ 모델은 26으로서 앞 모델이 보다 적절하다. 이 결과는 일라이트 광석 표면에서 수소의 해리와 첨가 반응 중 첨가 반응을 무시하여도 표면반응을 설명하는 데 큰 무리가 없음을 시사한다. 가장 적절하다고 판단되는 1 site -1 $pK_{a}$ 모델의 $pK_{a}$ 값은 4.17, specific capacitance는 $6F/m^2$ 표면 자리 농도는 $1.15\Times10^{-3}$ mol/L 이다.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.92-92
/
2016
전기방전의 기본적인 특성을 가지고 있는 플라즈마를 이용하여 재료를 가공하는 증착, 식각, 표면처리 공정에 있어서 플라즈마 내의 전자 충돌 반응에 의한 이온, 라디칼의 생성과 재료 표면의 반응을 분석하는 도구로써 분압 측정은 일반적인 화학 조성 분석에 기원한 오랜 역사를 가지고 있다. 1 amu 정도의 분해능을 가지고 있고 크기가 30 cm 정도에 불과한 사중극자 질량 분석기는 적절한 질량 스캔 시간과 넓은 이온 전류 측정 범위를 가지므로 소형 차등 배기 시스템과 조합하면 1 mTorr 영역의 스퍼터링 시스템에서 1 Torr 영역의 PECVD/PEALD 시스템 진단에도 쉽게 적용이 가능하다. Inficon사의 CPM-300과 Pfeiffer사의 Prisma80을 이용한 플라즈마 식각 공정 분석 결과를 보면 동위원소까지 분석이 가능하다. 또한 전자충돌 이온화 에너지를 조절하여 m/q(질량전하비율)가 중첩되는 경우의 해석도 가능하다. 다중 오리피스를 갖는 compact design의 밸브 블록을 이용한 설계에서는 line-of-sight 입사가 불가능하여 이온 전류를 분석할 수 없다는 단점이 있으나 표준 가스를 이용한 정량화 등의 큰 장점들이 있다. 최근 이루어진 연구의 내용으로는 유도 결합 플라즈마 장치에서 전도성 메쉬를 이용한 라디칼 거동 관찰을 위해서 두 대의 CPM-300을 메쉬 전 후에 설치하여 라디칼의 양 변화를 전류 프로브와 같이 사용하여 조사하였다.
The goal of this study was to develop an optimal formula for cookies containing soybean/seoritae, Hwanggum, and isomalto-oligosaccharide using response surface methodology to achieve a blood glucose lowering effect. The model showed a good fit with the experimental data [$R^2=0.92$ (soybean) and 0.93 (seoritae)]. However, the p-value of lack of fit was less than 0.05 and ridge analysis was used to determine an optimal formula. The estimated optimal conditions were as follows: soybean cookie: 68.7% soybean, 2.5% Hwanggum, and 75.2% isomalto-oligosaccharide; seoritae cookie: 56.5% soybean, 3.8% Hwanggum, and 56.2% isomalto-oligosaccharide. The area under the curve and glycemic index were significantly lower in the soybean cookie group than in the control. The glycemic load (GL) index of the soybean (19.9) cookie was in the range of a low-glycemic food (<20 GL). These results can be applied to develop a cookie with a blood glucose lowering effect.
Journal of Korean Society of Environmental Engineers
/
v.38
no.5
/
pp.242-248
/
2016
The overall reaction rate of fuel cell is governed by oxygen reduction reaction (ORR) in the cathode due to its slowest reaction compared to the oxidation of hydrogen in the anode. The ORR efficiency can be readily evaluated by examining the adsorption strength of atomic oxygen on the surface of catalysts (i.e., known as a descriptor) and the adsorption energy can be controlled by transforming the surface geometry of catalysts. In the current study, the effect of the surface geometry of catalysts (i.e., strain effect) on the adsorption strength of atomic oxygen on platinum catalysts was analyzed by using density functional theory (DFT). The optimized lattice constant of Pt ($3.977{\AA}$) was increased and decreased by 1% to apply tensile and compressive strain to the Pt surface. Then the oxygen adsorption strengths on the modified Pt surfaces were compared and the electron charge density of the O-adsorbed Pt surfaces was analyzed. As the interatomic distance increased, the oxygen adsorption strength became stronger and the d-band center of the Pt surface atoms was shifted toward the Fermi level, implying that anti-bonding orbitals were shifted to the conduction band from the valence band (i.e., the anti-bonding between O and Pt was less likely formed). Consequently, enhanced ORR efficiency may be expected if the surface Pt-Pt distance can be reduced by approximately 2~4% compared to the pure Pt owing to the moderately controlled oxygen binding strength for improved ORR.
오존에 의한 식물체의 가시피해 발현 이전에 나타나는 비가시적 피해를 찾아내기 위하여 적외선 열화상장치(infrared thermography)를 이용하여 하루 8시간씩 0.3 ppm 오존에 노출된 나팔꽃(Ipomoea purpurea)잎표면의 온도분포 변화를 조사하였다. 노출 첫날에는 온도분포의 뚜렷한 변화를 볼 수 없었다. 노출 2일째, 오존 노출 2시간 결과후, 완전히 자란 제3엽의 특정 부분에서 급격한 온도분포 변화를 보였으며, 그로부터 약 4시간 경과 후에 동일 지점에서 최초의 가시적 피해가 발생했다. 급격한 온도분포 변화를 보인 부분과 최초 가시피해가 발생한 부분이 일치한 점은 가시피해 발생과 그 이전의 온도분포 변화가 밀접하게 상관되어 있다는 것을 의미한다고 하겠다. 잎표면의 열화상 분석방법을 대기오염원에 의한 식물체의 가시피해 발현 이전에 진행되고 있는 비가시적 반응의 조기진단에 적용할 수 있으며 생태환경 친화적인 대기 환경관리를 위한 대기오염원은 배출조절용 생체반응기(biosensor)로 이용 가능하겠다.
Jo, Yu-Geun;Kim, Seong-Min;Jin, Sang-Hun;Lee, Un-Yeong;Lee, Min-Hyeong
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.77-77
/
2018
Panel level packaging (PLP) 공정은 차세대 반도체 패키징 기술로써 wafer level packaging 대비 net die 면적이 넓어 생산 단가 절감에 유리하다. PLP 공정에 적용되는 구리 재배선 층 (RDL, redistribution layer)은 두께 불균일도에 의해 전기 저항의 유동이 민감하게 변화하기 때문에 RDL의 두께를 균일하게 형성하는 것은 신뢰성 측면에서 매우 중요하다. 구리 RDL은 주로 도금 공정을 통해 형성되며, 균일한 도금막 형성을 위해 도금조에 평탄제를 첨가하여 도금 속도를 균일하게 한다. 도금막에 대한 흡착은 주로 평탄제의 imine 작용기에 포함된 질소 원자가 관여하며, imine 작용기의 4차화에 의한 평탄제의 흡착 정도를 제어하여 평탄제 성능을 개선할 수 있다. 본 연구에서는 도금 평탄제에 포함된 imine 작용기의 질소 원자를 4차화하여 구리 RDL의 도금 두께 불균일도를 제어하고자 하였다. 유기첨가제와 4차화 반응을 위해 알킬화제로써 dimethyl sulfate의 비율을 조절하여 각각 0, 50, 100 %로 4차화 반응을 진행하였다. 평탄제의 4차화 여부를 확인하기 위해 gel permeation chromatography (GPC) 분석을 실시하였다. 도금은 20 ~ 200 um의 다양한 배선 폭을 갖는 구리 RDL 미세패턴에서 진행하였으며, 4차화 평탄제를 첨가하여 광학 현미경과 공초점 레이저 현미경을 통해 도금막 표면과 두께에 대한 분석을 실시하였다. GPC 분석을 통해 4차화 반응 후 알킬화제에 의해 나타나는 GPC peak이 감소한 것을 확인하였다. 광학 현미경 및 공초점 레이저 현미경 분석 결과, 4차화된 질소 원자가 존재하지 않는 평탄제의 경우, 도금 시 도금막의 두께가 불균일하였으며 단면 분석 시 dome 형태가 관찰되었다. 또한 100 % 4차화를 실시한 평탄제를 첨가하여 도금 한 경우 마찬가지로 두께가 불균일한 dish 형태의 도금막이 형성되었다. 반면, 50 % 4차화를 적용한 평탄제를 첨가한 경우, 도금막 단면의 형태는 평평한 모습을 보였으며 매우 양호한 균일도를 가지는 것으로 확인되었다. 이로 인해 imine 작용기를 포함한 평탄제의 4차화 반응을 통해 구리 RDL의 단면 형상 및 불균일도가 제어되는 것을 확인하였으며, 4차화된 imine 작용기의 비율을 조절하여 높은 균일도를 갖는 구리 RDL 도금이 가능한 것으로 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.