• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.293-293
• /
• 2007

현재 활발하게 진행되고 있는 이차전지 양극 물질 중 저렴한 가격과 친환경성으로 각광받고 있는 $LiMn_2O_4$ spinel 산화물은 여러 장점에도 불구하고 용량 값이 기존 알려져 있던 Co-계 산화물에 비해 떨어지고 cycle 특성 역시 현저하게 이어진다. 이는 Mn이 전해액과의 반응에 있어 구조적인 안정성을 지니지 못하여 용출되어 나타나는 특성이다. 이번 연구에서는 Mn의 용출을 저지하고 용량의 향상을 이룰 수 있는 전이금속 중 Fe산화물을 치환하여 구조적 안정성을 갖도록 하였다. Fe산화물 치환을 통해 기본적 물성의 변화와 전기적 특성 변화를 측정하였고 공정에서의 온도 및 입도에 따른 영향도 확인하였다. Fe산화물은 Mn 자리의 3+와 4+의 자리에 치환되어 용량을 증대시키고 사이클 특성을 10회 기준으로 20%가량 향상시키는 효과를 가져왔다.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.24-30
• /
• 1998

솔젤법을 이용하여 단분산의 실리카 입자를 제조하고 농도변화에 따른 실리카 분산 액의 유변학적 거동을 해석하였다. 단분산 실리카 입자의 제조는 솔젤법을 이용한 액상반으 으로 제조하였고 입자의 안정화를 위하여 입자표면에 실란커플링제를 코팅하여 유기용매에 서 안정성을 갖도록 하였다. 분산액의 농도에 따른 유변학적 거동을 조사하기 위하여 부피 분율( )이 0.05인 희박 분산계로부터 =0.55의 고농도 분산계를 제조하였다. 솔젤법을 통하 여 단분산 실리카 입자를 성공적으로 제조하였으며 실란커플링제인 ${\gamma}$-methacryloxypropyl triethoxysilane로 입자의 표면을 화학적 방법으로 처리하여 유기용매 상에서 알킬기의 작용 에 의한 hard-sphere'특성을 나타내도록 하였으며 동시에 분산안정성을 유지할수 있었다. 입자 분산계는 =0.25이하의 부피농도에서는 분산용매와 같은 뉴톤거동을 보여주었으며 이 이이상의 농도에서는 비뉴톤거동인 전단담화(shear thinning)현상과 high shear limiting viscosity를 나타내었다. 이결과는 Krieger-Dougherty 식을 따름이 확인되었으며 부피분율 =0.50정도까지도 이식이 잘적용됨을 확인하였다. 부피분율 =0.50 이상의 고농도 입자 분산계 는 급격한 점도의 증가와 함께 전단담화와 전단탁화(shear thickening)현상이 모두 관찰되었 다. 특히 전단탁화를 일으키는 특헝전단변형률(cr)이하의 전단변형률에서는 안정되고 빠른 점성반응(viscous response)을 보여주었으나 특성 전단변형률 부근과 이상의 전단변형률 영 역에서는 매우 불안한 거동이 보여짐을 확인하였다. 그러나 이러한 점도 거동은 가역적이며 전단변형률을 증가시킬때와 감소시킬 때의 유변학적 거동이 거의 일치하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.387-393
• /
• 2017

The dynamic interactions between benzoic acid derivative ($pH{\approx}7.0$)(guest) and ${\beta}$-cyclodextrin (${\beta}$-CD)(host) were investigated in an aqueous solutions in terms of ultrasonic absorption in the frequency range 0.2 MHz ~ 50 MHz with emphasis on the low-frequency range below 1 MHz at $25^{\circ}C$. We show that the interaction of ${\beta}$-CD and benzoic acid derivative complies with a typical spectrum of a single relaxation process around a few MHz. The ultrasonic relaxation observed in these solutions was due to a perturbation of a chemical equilibrium related to a reaction of an inclusion complex formed by the host and guest. The rate constant ($k_b=7.48{\times}10^6M^{-1}s^{-1}$) and equilibrium constant ($K=68.6M^{-1}$) were determined from the concentration dependences of benzoic acid on the relaxation frequency. The standard volume change (${\Delta}V=10.6{\times}10^{-6}m^3mol^{-1}$) of the reaction was also computed from the maximum absorption per wavelength. It was found that the hydrophobicity of guest molecules played an important role in the formation of the inclusion complex.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.639-642
• /
• 1999

Optimization of the chitosanoligosaccharide production was studied with chitosanase. The optimum conditions for the enzymic reaction have been determined. Enzyme stability was maintained above 90% after 6 days at pH 5.0. The optimum initial reaction rate was appeared in 1.0% of chitosan solution. The production yield of chitosanoligosaccharides was over at 0.4%~2.0% of chitosan. At 4.0% of chitosan solution, however, the production yield was decreased to 64.6%. To increase the yield, stepwise addition of substrate into the reactor was investigated. In this case, the yield was increased from 64.6% to 83.2% and the final concentrations of chitosanoligosaccharide was 12.26 mg/mL. By TLC analysis, most of the chitosanoligosaccharides produced were 3-5 mers.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.969-973
• /
• 1997

In order to produce transglucosylated steviosides continuously, some types of bioreactors were investigated with cyclodextrin glucanotransferase immobilized on a high porous anion exchange resin, Diaion HPA75. Among the bioreactors, the packed-bed reactor (PBR) showed the highest specific productivity. The effect of linear velocity in a PBR on the stevioside conversion was not significant in the range of $10{\sim}60\;cm/hr$ at the same space velocity of $1.2\;hr^(-1)$. When the space velocity of bioreactor was varied from 0.2 to $1.1\;hr^{-1}$, the optimal velocity of substrate solution was determined as $0.7\;hr^(-1)$. The stevioside conversion of more than 70% was maintained during 20 days in the continuous operation, if about 20% of immobilized enzyme was replaced in the top of reactor after two weeks operation as the one of the control methods in bioreactor. The specific production, which refers to as the amount of commercially valuable transglucosylated steviosides produced by a unit amount of immobilized cyclodextrin glucanotransferase, was found to be ca. 150g product/g immobilized enzyme.

• Clean Technology
• /
• v.20 no.4
• /
• pp.367-374
• /
• 2014

Several experiments have been done to investigate the removal of hydrogen sulfide ($H_2S$) synthetic gas from biogas streams by means of chemical absorption and chemical reaction with 0.1-1 M Fe/EDTA solution. The roles of Fe/EDTA were studied to enhance the removal efficiency of hydrogen sulfide because of oxidizing by chelate. The motivation of this investigation is first to explore the feasibility of enhancing the toxic gas treatment in the biogas facility. The biogas purification strategy affords many advantages. For instance, the process can be performed under mild environmental conditions and at low temperature, and it removes hydrogen sulfide selectively. The end product of separation is elemental sulfur, which is a stable material that can be easily disposed with minor potential for further pollution. As the Fe-EDTA concentration increased, the conversion rate of hydrogen sulfide increased because of the high stability of Fe-EDTA complex. pH as an important environmental factor was 9.0 for the stability of chemical complex in the oxidation of hydrogen sulfide.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.197-205
• /
• 1981

Penicillin amidase of Bacillus megaterium was recovered from the fermentation broth by adsorption on celite and immobilized by entrapping the adsorbed enzyme in acrylamide gel. The operational stability in column reactor was greatly increased by entrappment as compared with that of without entrappment. The optimum pH of the immobilized enzyme was 8.7 with broader activity profile than that of the free enzyme, while the most stable pH range appeared to be between pH 7.5 and 8.0. The optimum temperature was shifted to 5$0^{\circ}C$ from 45$^{\circ}C$ for the soluble enzyme. The values of Km and the inhibition constants for 6-APA( $K_{ia}$ ) and phenylacetic acid ( $K_{ip}$ ), were 4.55 mM, 36.5mM, and 10.5mM, respectively. No significant internal pore diffusion limitation was found since the value of effectiveness factor was 0.95. The operational half life in a column reactor at pH 8.0 was 6.8 days at 4$0^{\circ}C$ and 47 days at 3$0^{\circ}C$, whereas that of without entrappment was only 1 day and 4 days, respectively. The performance of a batch and a column reactor was also discussed with respect to the productivity. The results demonstrated that the entrappment of an adsorbed enzyme for the enhancement of the operational stability of the immobilized enzyme was useful especially when an extracellular enzyme was used.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.289-296
• /
• 2010

Lectins are carbohydrate-binding and a cell-agglutinating proteins, and are concerted with a plants defence mechanism. In particular, chitin-binding lectins in locular fluid of cherry tomato fruit seemed to have a role in defending plants against fungi. The antifungal activity using lectin isolated from locular fluid of cherry tomato fruit was measured in the plant pathogen Cladosporium cucumerinum, Monosporascus cannonballus, Fusarium oxysporum, and Rhizoctonia solani. Amoung the four strains, a potent antifungal activity was detected in Cladosporium cucumerinum and Monosporascus cannonballus, not in Fusarium oxysporum, and Rhizoctonia solani. The molecular weight of this lectin isolated as double protein bands by SDS-PAGE was calculated to be 87 kDa and 47 kDa from the relative mobilities compared with those of reference molecular weight markers. The isolated lectin agglutinated human red blood cells (A, B, AB, O) treated with trypsin, and the most activity was found at B. The optimal temperature of isolated lectin was at $30^{\circ}C$. For the thermal stability, lectin was stable at $20-80^{\circ}C$. The optimal pH of this lectin was at 7.2, and showed complete loss below pH 9.0.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.357-368
• /
• 2012

The purpose of this study is to empirically examine the impact of enterprise R&D investment on international trade in Korea under the new Normal Era. In order to test whether the time series data of trade variables are stationary or not, we put in operation unit root test and cointegration test. Based on VECM (Vector Error Correction Model), we also apply impulse response functions and variance decomposition to estimate the dynamic effects in the short-run and long-run. The results show that the relationship between enterprise R&D investment and international trade (export and import) exists in the long-run as well as in the short-run. The results of applying impulse response functions and variance decomposition also indicate that the impact of enterprise R&D investment on international trade is positive, and a significant portion of fluctuations in the trade variable is explained by enterprise R&D investment. Therefore, enterprise R&D investment must be continuously increased to improve economic growth with promoting trading competition power in Korea under the new Normal Era.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4013-4018
• /
• 2014

A 0.45 $cm^2$ DSSC device with a glass/FTO/blocking layer/$TiO_2$/N719(dye)/electrolyte/50 nm-Pt/50 nm-Au/FTO/glass was prepared to examine the stability of the Au/Pt bilayered counter electrode (CE) with electrolyte and the energy conversion efficiency (ECE) of dye-sensitized solar cells (DSSCs). For comparison, a 100 nm-thick Pt only CE DSSC was also prepared using the same method. The photovoltaic properties, such as the short circuit current density ($J_{sc}$), open circuit voltage ($V_{oc}$), fill factor (FF), and ECE, were checked using a solar simulator and potentiostat with time after assembling the DSSC. The microstructure of the Au/Pt bilayer was examined by optical microscopy after 0~25 minutes. The ECE of the Pt only CE-employed DSSC was 4.60 %, which did not show time dependence. On the other hand, for the Au/Pt CE DSSC, the ECEs after 0, 5 and 15 minutes were 5.28 %, 3.64 % and 2.09 %, respectively. The corrosion areas of the Au/Pt CE determined by optical microscopy after 0, 5, and 25 minutes were 0, 21.92 and 34.06 %. These results confirmed that the ECE and catalytic activity of Au/Pt CE decreased drastically with time. Therefore, a Au/Pt CE-employed DSSC may be superior to the Pt only CE-employed one immediately after integration of the device, but it would degrade drastically with time.