• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.68-74
• /
• 2005

Optimal shape of a typical ramjet intake is examined numerically to maximize the total pressure recovery. A response surface method is introduced to approximately predict its performance with respect to the design parameters over the each design domain. The first deflection angle of ramp, the area of inlet throat, and the diffuser angle are chosen as a design parameter. ANOVA is used to verify the trustability of the achieved response surface. The total pressure recovery of the optimum model, compared to that of the base model, is increased by 36%. The loss of viscosity through the diffuser is estimated less than 5%.

• Progress in Medical Physics
• /
• v.2 no.1
• /
• pp.17-28
• /
• 1991

Generally, it is an accurate radiation measurement technique for processors fo thermoluminescent dosimenters(TLDs) to characterize each element they use by producing element correction factors(FCFs). TLDs are classified into three groups such as reference. control, and field TLDs. Reference TLDs are used only for the production of ECFs for the control and field TLDs. They are kept locked in a safe place except when it is necessary to use a subset of them to produce ECFs for the control and field TLDs. The ECF of a given element is a measure of the response of the element relative to the mean response of an arbitrarily selected group of reference elements. As TLDs are used in the field, their relative responses to radiation might be decreased due to muliple readings and physical abuse. Therefore, the producditon of ECFs are performed initially and periodically during the field use. This element correction method provides an excellent tool to examine new TLDs and to monitor the reliability of old TLDs. This paper discuss the 10 step procedures developed to produce and examine ECFs.

• 대한두경부종양학회:학술대회논문집
• /
• 2002.11a
• /
• pp.256-256
• /
• 2002

• KSBB Journal
• /
• v.5 no.3
• /
• pp.279-291
• /
• 1990

Partial hydrolysed and deacetylated chitin, CHITA and CHITB as supports of immobilized enzyme were obtained by treatment of acid and base respectively. Glutaraldehyde, bifunctional reagent, was employed for crosslinking between $\beta$-glucosidase and support. Immobilized enzyme activities of CHITA-Gase and CHITB-Gase were determined with the reaction of p-nitrophenol-$\beta$-D-glucopyranoside(PNG) in batch reactor, CSTR and PFR. Their optimum temperature, pH and enzymatic characteristics including Km and Vmax values were observed with variation of the flow rates. Mass transfer coefficient(h), effectiveness factor(η), deactivation rate(kd ) of two immobilized enzymes were also examined to compare efficiency of reactors.

• Journal of Nutrition and Health
• /
• v.9 no.4
• /
• pp.54-58
• /
• 1976

Deterioration of ascorbic acid content is the important factor in the food quality. The degradation of ascorbic acid undergoes as a first-order of reaction in the presence of excess oxygen content. However, under the limited oxygen content, ascorbic acid decomposes as a psudo-first order of reaction. The ascorbic acid, in this study, under the limited dissolved oxygen content in the presesce of iron(III) and copper(II) decomposed as first-order reaction with a little influence in rate constant and the light was an accelerating factor on the ascorbic acid degradation.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.05a
• /
• pp.138-139
• /
• 2001

$TiO_2$/UV 고급 산화 공정을 실제 산업 폐수에 적용하였다. 회분식 원통형 반응기에서 T산업 폐수를 광반응시킨 결과 COD 값과 TOC 값이 24시간 경과된 후 95% 이상의 제거 효율을 나타내었다. 광반응에 미치는 인자에 대한 연구에서 $TiO_2$ powder가 0.1 $g/{\ell}$ 에서 8 $g/{\ell}$까지는 투입된 광촉매의 량과 광반응속도가 비례적으로 증가되었으나 10 $g/{\ell}$ 이상에서는 광차폐효과가 나타나 광반응속도가 감소하였으며, UV 광원이 강할수록 광반응 속도는 증가하였고 초기 pH는 광촉매 반응에 영향을 미치지 않음을 알 수 있었다.

• Korean Journal of Psychosomatic Medicine
• /
• v.10 no.1
• /
• pp.18-26
• /
• 2002

Objectives : The object of this study was to investigate the relationship between coping strategies and perceived stress or pain discomfort in patients with chronic low back pain. 80 patients with chronic low back pain and 100 normal controls participated in this study. Methods: Global assessment of recent stress (GARS) scale and Stress Response Inventory (SRI) were used to measure perception for stressors and stress responses. Coping scale and pain discomfort scale were used to measure coping strategies and pain perception. Results : Scores of perceived stress related to work or job, interpersonal relationship, changes in relationship, sickness or illness and the total scores on the GARS scale were significantly higher in those with chronic low back pain than normal controls. Scores of the SRI fatigue subscale scored significantly higher in those with chronic low back pain than normal controls. No significant difference was found on total scores of the pain discomfort scale between those with chronic low back pain and normal controls. The patients with chronic low back pain scored significantly higher on planful problem solving and positive reappraisal than normal controls. In the patient group, pain perception had significant positive correlations with total scores of the SRI and scores of stress perception related to illness or injury. The extent of escape-avoidance showed significant negative correlations with age, whereas the extent of distancing or escape-avoidance had significant negative correlations with the level of education. Significant difference was also found in accepting responsibilities between male subjects and females. However, no significant correlations were found between coping strategies and perceived stressors, stress responses or pain perception. Conclusion : The results suggest that patients with chronic low back pain were more likely to use more active coping strategies than normal controls, though the former had more perception for stressors than the latter. It was also found that coping strategies used by the patients were associated with sociodemographic factors, but that they were not associated with perceived stressors, stress responses or pain perception.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.44-51
• /
• 2016

The powder core, conventionally fabricated from iron particles coated with insulator, showed large eddy current loss under high frequency, because of small specific resistance. To overcome the eddy current loss, the increase in the specific resistance of powder cores was needed. In this study, copper oxide coating onto electrically conductive iron particles was performed using a planetary ball mill to increase the specific resistance. Coating factors were optimized by the Response surface methodology. The independent variables were the CuO mass fraction, mill revolution number, coating time, ball size, ball mass and sample mass. The response variable was the specific resistance. The optimization of six factors by the fractional factorial design indicated that CuO mass fraction, mill revolution number, and coating time were the key factors. The levels of these three factors were selected by the three-factors full factorial design and steepest ascent method. The steepest ascent method was used to approach the optimum range for maximum specific resistance. The Box-Behnken design was finally used to analyze the response surfaces of the screened factors for further optimization. The results of the Box-Behnken design showed that the CuO mass fraction and mill revolution number were the main factors affecting the efficiency of coating process. As the CuO mass fraction increased, the specific resistance increased. In contrast, the specific resistance increased with decreasing mill revolution number. The process optimization results revealed a high agreement between the experimental and the predicted data ($Adj-R^2=0.944$). The optimized CuO mass fraction, mill revolution number, and coating time were 0.4, 200 rpm, and 15 min, respectively. The measured value of the specific resistance of the coated pellet under the optimized conditions of the maximum specific resistance was $530k{\Omega}{\cdot}cm$.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.179-184
• /
• 2008

The separation and purification of succinate are necessary for the succinic acid production by a fermentation process. Among the purification processes, desalination of succinate is inevitable. In this work, electrodialysis was selected as a desalination method and its operating parameters affecting the degree of desalination and energy consumption were examined. Commercialized electrodialysis apparatus was used in this work and its optimum operating parameters were determined by using design of experiment (DOE) method. Voltage, concentration of succinate, and pH were selected as main parameters. Among them, voltage seemed to be the most important one. The final conversion of succinate to succinic acid was calculated when the operating parameters were optimized. Finally, the effect of impurities, such as corn steep oil, yeast extract, and dextrose on the electrodialysis efficiency was also studied.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.17-22
• /
• 2017

This review deals with scale-up strategies for optimized chemical processes particularly for micron and submicron products. The method of finding scale-up factors was also introduced for two systems, a system with chemical reaction and a system without chemical reaction. This review is expected to serve as an initial guideline for process engineers who are to scale up their current chemical processes for small products of micron or submicron size.