• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.683-693
• /
• 2017

Transport biofuels have been recognized as a promising means to resolve the following issues like global warming, oil depletion and environmental pollutions. Among various biofuels, biodiesel has several advantages such as less emission of air pollutants and higher cetane values compared to diesel oil. Demand for biodiesel in Korea is increasing that leads to higher dependence on the imported feedstocks. Therefore, it is important to utilize the waste materials collected domestically for biodiesel production. Food waste oil collected in waste treatment facility has not been used for biodiesel production due to high free fatty contents in the oil. In this work, biodiesel conversion of food waste oil by Amberlyst 15 was studied. Synthetic and actual food waste oils have been used in the study. First, the effects of the major operating parameters including reaction temperature, methanol to oil molar ratio and catalyst loading on the conversion rates and yields were determined with synthetic waste oil. Kinetic modelling work was also done to determine the activation energy of the reaction. From the work, optimization reaction conditions were determined to be 383K, 1: 26.1 for methanol molar ratio to oil, 10 wt.% for catalyst loading and 360 min for reaction time. Activation energy of the reaction is determined to be 29.75 kJ/mol, lower than those reported in the previous works. So the solid catalyst, Amberlyst 15, was more efficient for esterification than the solid catalysts employed in the other works. Agitation rates have the negligible effects on the conversion rates and yields. With the identified optimization conditions, conversion of the actual food waste oil was also carried out. The esterification yield of actual food waste oil in 60 min was 13% lower than that of synthetic waste oil but the final yields in 240 min were similar each other, 98.12% for synthetic oil and 97.62% for actual waste oil.

• Journal of Korea Port Economic Association
• /
• v.32 no.2
• /
• pp.59-71
• /
• 2016

This study empirically examines the dynamic specification of the ship price model based on a vector autoregressive model and data covering from January 2000 to October 2014. Our results are summarized as follows: first, the relationship between ship price and interest rate shows significantly negative and the relationship between ship price and freight rate shows positive. It provides consistent implication that ship price depends on interest rate and freight rate under the dynamic Gordon model. Second, we apply an impulse response analysis to ship price and find the responses of the ship price from both factors, interest rate and freight rate, which affect during seven periods approximately. Finally, the results of a variance decomposition indicate that freight rate is more important than interest rate on the ship price.

• Korean Journal of Culture and Social Issue
• /
• v.12 no.4
• /
• pp.77-99
• /
• 2006

The purpose of this study was to find out the effects of auto-mobile tinting upon driver's cognitive responses and behaviors through two laboratory experiments, a field experiment and a traffic accident data. The results of two laboratory experiments showed that there were higher false alarm responses under the conditions of 65%, 50%, 35% tinting level than thoses under the 100% level condition. It was also shown that the drivers who had bad sight made more missing responses than the drivers who had normal vision. The main results of the laboratory experiment were repliceted through both the field experiment and the survey research of car accidents. The results of this study were discussed in terms of the previous studies performed abroad. We strongly suggested 70% tinting level as a regulation standard for safe driving and the strategies for implementing the regulation rule.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.229-237
• /
• 1999

The influence of ascorbic acid (Asc) and ferrous sulfate (Fe$^{2＋}$) on capacitation, acrosome reaction and fertility in vitro was investigated in boar frozen-thawed spermatozoa with or without preincubation. The addition of 0-1.0 mM Fe$^{2＋}$ to sperm suspensions during preincubation increase acrosome reaction (P＜0.05) and oocyte penetration. These increase are also associated with addition of 0~0.5 mM Asc, but the penetration rates were higher in those without than with sperm preincubation. The addition of 0.1 mM Asc than 0.5 mM in medium with Fe$^{2＋}$ were significantly (P＜0.05) higher on acrosome reaction at 2 h after sperm preincubation. No significant differences, however, were observed in penetration rates among the concentrations of Asc. On the other hand, when preincubation medium containing the Asc was supplemented with 0.1mM Fe$^{2＋}$, the percentage of spermatozoa acrosome-reacted were significantly (P＜0.05) higher than in medium wothout Fe$^{2＋}$, on the contrary, the penetration rate was significantly (P＜0.05) low during in-vitro fertilization. These findings indicate some apparent effects of Fe$^{2＋}$ or Asc addition on acrosome reaction and the fertilizing potential by sperm preincubation.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.48-57
• /
• 2014

In this study, we have investigated the influence of the nature of solvent on the grafting reaction of maleic anhydride onto polyethylene wax obtained as a by-product in a high density polyethylene plant. The results show that the grafting ratio in xylene as a solvent was higher than toluene. This is because xylene has excellent monomer solubility, swelling property and miscibility. It has been also observed that grafting degree shows an initial jump in percentage of grafting with increasing amount of solvent, from 0% v/w to 200% v/w giving maximum grafting in 200% v/w and then slightly decreases on further increase in the amount of solvent and becomes almost constant. It can be also seen that gel content was not formed under the use of solvent. It means that solvent prevented cross-linking reaction due to chain transfer reactions to solvent molecules. Studies of melt viscosity at $140^{\circ}C$ showed that viscosity increased after grafting of maleic anhydride onto polyethylene wax.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.41-46
• /
• 2013

The present study has been conducted to investigate the reaction kinetics and pyrolysis parameters for flame propagation analysis of furniture material components. TGA measurement for component materials such as MDF (medium density fiberboad) panel including coating material, synthetic leather and foam cushion are performed under maximum temperature of $600^{\circ}C$ and heating rate of $10^{\circ}C/min$. The results of TGA have shown that the peak temperature of MDF panel was $324^{\circ}C$ and the initial peak temperature of coating material decreased by $270{\sim}280^{\circ}C$. In the case of synthetic leather and foam materials, the reference temperature and reference rate depend on the type of polymer consisting the sample, the initial kinetic characteristics was classified into 2 categories of about $270^{\circ}C$ and $420^{\circ}C$ of reference temperature for the tested synthetic materials. The present study showed the pyrolysis parameters of reference temperature and reference rate proposed by Lyon to evaluate the pre-exponential factor and activation energy. The present study can contribute to improve the reliability of computational fire analysis and enhance the understanding of fire propagation phenomena based on the thermal properties study of material.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.950-957
• /
• 2023

Purpose: The response technology is needed to prevent the spill of highly toxic oil contaminants in advance. Therefore, this paper described the results of an experimental study to predict the engineering properties of the developed reactive material. Method: Compaction tests and spectral information acquisition experiments were conducted on the reactive materials, and the results were evaluated. In addition, the correlation between spectral information and maximum dry unit weight was analyzed to evaluate the possibility of predicting the engineering properties for reactive materials. Result: The compaction test results showed that the maximum dry unit weight was in the range of approximately 9kN/m³ to 10kN/m³. The spectral information confirmed that the maximum reflectance decreased as the polynorbornene decreased. Conclusion: It was confirmed that the maximum dry unit weight of the reactive material for absorbing oil contaminants can be predicted using the maximum reflectance according to the component ratio of the reactive material.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.129.1-129.1
• /
• 2010

석탄가스화로부터 얻어진 합성가스는 CO, $H_2$가 주성분으로, 그 자체를 연료로 사용하여 발전을 하거나 또는 적절한 정제, 분리 및 합성을 통해 다양한 원료물질을 생산할 수 있다. 이러한 석탄의 청정 사용 기술은 최근의 에너지 분야에서 많은 관심을 불러일으키고 있는 고유가 현상 및 석유자원 고갈에 대비할 수 있는 현실적인 방법의 하나로 여겨지고 있다. 석유를 대체할 에너지원으로서 석탄을 이용하는 다양한 응용 방법 중의 하나로 가스화 반응을 통해 발생하는 합성가스를 이용한 SNG 제조 공정을 들 수 있는데, 이는 석탄 등의 고체 시료를 이용하여 메탄이 주성분인 연료가스를 생산하는 것이다. SNG(Synthesis Natural Gas 또는Substitute Natural Gas)는 합성천연가스 또는 대체천연가스로 불리어지는데 주로 석탄의 가스화를 통해 얻어진 합성가스(syngas 또는 synthesis gas)인 CO, $H_2$를 촉매에 의한 합성반응을 통해 얻을 수 있다. SNG 합성 반응(메탄화 반응)은 보통 수성가스 전환 공정과 가스 정제 공정을 거친 합성가스를 $CH_4$로 전환하는 것으로 석탄을 이용한 SNG 제조 공정에서 가장 핵심 공정인 메탄화 반응은 높은 발열반응으로 주로 니켈 촉매를 사용하며 $250{\sim}400^{\circ}C$에서 반응이 이루어진다. SNG 합성 반응은 공급되는 합성가스의 조성($H_2$/CO 비), 공급되는 합성가스의 유량과 반응기에 충진된 촉매의 부피와의 관계를 나타낸 공간속도, 반응온도 등의 조건에 따라 반응 특성이 달라질 수 있다. 가스화 반응을 통해 생성되는 합성가스를 이용한 SNG 합성반응(메탄화 반응)의 특성을 파악하기 위하여 Lab-scale 규모의 고정층 반응기를 이용하여 Ni 함량이 다른 2종류의 촉매를 대상으로 반응온도 및 압력에 따른 CO 전환율, $CH_4$ 선택도, $CH_4$ 생산성 변화를 파악하였다. 실험 결과 반응기의 온도가 350도 이상의 조건에서 CO 전환율은 99.8%이상, $CH_4$ 선택도는 90.7%이상으로 나타났으며, 공간속도가 2,000 1/h 이상의 조건에서는 $CH_4$ 생산성이 500 ml/g-cat, h을 만족하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.67-73
• /
• 1998

This study was to experiment, through sewage sludge treatment by Vacuum Drying Method, variation of water content with reaction pressure, reaction time, reaction temperature. The result are as follows; The water content decreased with the same reaction temperature and reaction time at lower pressure and 360~40 mmHg (a close vacuum) showed lower water content at low reaction temperature and short reaction time. The water content rapidly decreased with the same reaction pressure and time at low reaction temperature (above $120^{\circ}C$).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1087-1094
• /
• 2008

Diazinon is a phosphorothiate insecticide widely used in the world including Korea. This study investigates the feasibility of photolysis and photocatalysis processes for the degradation of diazinon in water. Both photolysis and photocatalysis reactiosn were effective in degrdading diazinon, however lower TOC removals were achieved. In case of photocatalysis, approximately 40% of nitrogen from diazinon was recovered as NO$_3^-$, and less than 5% of phosphorus as PO$_4{^{3-}}$. However, the sulfur in diazinon molecule was completely recovered to SO$_4{^{2-}}$ from photocatalysis reaction, and the recovery from photolysis was 50%, indicating that P=S bond easily breaks first during photolysis and photocatalysis. The poor recoveries of ionic byproducts and TOC from photolysis and photocatalysis indicate the presence of other organic intermediates during reactions. The formation of organic intermediates were identified during reactions using GC/MS and LC/MS/MS, and the main degradation products were diazoxon, and 2-isopropyl-4-methyl-6-hydroxypyrimidine (IMP), respectively. Finally, the acute 48-hr toxicity test using Daphnia magna were employed to measure the toxicity reduction during photocatalysis of degradation. The results showed that the toxicity increased until 180 min of the photocatalysis reaction (from EC$_{50}$ (%) of 69.6 to 13.2%), however, acute toxicity completely disappeared (>100%) after 360 min. The toxicity results showed that the intermediates from photocatalysis such as diazoxon were more toxic than diazinon itself, however these intermediates can be degraded or mineralized with further reaction.