• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.231-231
• /
• 2003

I-III-Ⅵ족 CuInGaSe$_2$(CIGS)계 화합물 태양전지는 1 eV 이상의 직접 천이형 에너지 밴드갭을 가지며, 전기 광학적으로 매우 안정하여 태양전지의 광흡수층으로 매우 이상적이다. CIGS 광흡수층제조를 위하여 용매열법 (solvothermal method)으로 CIGS나노입자를 합성하였다. 용매열법은 진공장비를 사용하던 기존의 방법에 비해 저온, 저압에서 저가로 합성할 수 있다는 장점을 가지고 있다. Copper, indium selenium 및 gallium 분말과 유기용매 ethylenediarnine을 autoclave안에서 반응시켜 CIGS 나노입자를 제조하였다. 280 에서 14시간동안 반응시켜 직경이 30-80 nm인 구형에 가까운 CIGS 나노입자를 얻었다. 이것은 용매열법에 의한 4성분계의 CIGS 나노입자의 최초 합성이다. diehyleneamine을 용매로 사용한 경우에 한하여 구형의 CIS 입자를 합성할 수 있다고 보고되었으나, Cu와 이중 N-chelation이 형성되는 ethylenediamine 용매임에도 불구하고 구형의 CIGS 나노분말이 형성된 것은 solution-liquid-solid (SLS) 기구로 설명할 수 있었다. HRSEM, TEM, XRD. EDS으로 나노분말의 형상 크기 및 조성을 조사하여 chalcopyrite 구조의 CuInGaSe$_2$ 임을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.333-339
• /
• 1976

The rates of solvolysis for 2-thenoyl chloride have been measured in aqueous acetone and aqueous ethanol at various temperatures ranging from 20 to $40^{circ}C$. The activation parameters and the Grundwald-Winstein's slope are determined by the analysis of solvolysis rates. The results indicated that the reaction rates of solvolysis are considerably slower than those of the reaction for benzoyl chloride due to the electron donating effect of thiophene nucleus. The results also showed that the reaction proceeds with the $S_N1$ mechanism in water-rich solvents whereas the $S_N2$ character increases with the decrease of water content, and overall reaction is subject to entropy control.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.151-156
• /
• 1996

수소동위원소 교환반응에 이용되는 스티렌-디비닐벤젠 고분자 촉매 담체를 제조하였다. 중합반응시 일정한 용매계에서 용매/모노머 함량비와 팽윤제/침전제 함량비를 변화시켜 담체의 표면특성에 미치는 영향을 확인하였다. 가교도가 33%일 경우 용매/모노머가 2.0 이하에서 팽윤제/침전제의 함량비가 증가할수록 10~30$\AA$의 반경을 갖는 기공의 분포가 증가하였다. 담체의 열적안정성을 확인하기 위한 열 중량 분석에서는 온도를 일정한 비율로 단시간에 증가시킬 경우에는 담체의 가교도에 관계없이 35$0^{\circ}C$ 근처에서 거의 유사한 degradation을 보였지만 온도를 매우 천천히 증가시켜 장시간 노출시킬 경우 가교도에 따라서 degradation의 정도와 경향이 다르게 나타남을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.83-88
• /
• 1977

Kinetic studies on the rates of reactions of 2, 4-dinitrochlorobenzene with p-toluidine, aniline and p-chloroaniline in $CH_3CH-CH_3OH$ binary solvent mixtures have been carried out. The experimental results have been explained in terms of the specific solvation by alcoholic hydrogen. It has been shown that the bond breaking step is rate determining in the solvent system studied and the energy barrier is getting low as the solvent changes from acetonitrile to methanol.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.99-106
• /
• 2021

To circumvent the skin problem from phenylethanol (PhE), we have studied on the enzymatic synthesis of phenylethanol galactoside (PhE-gal) as an alternative to PhE. Base on the previous study, we optimized the reaction conditions for PhE-gal synthesis from PhE using E. coli β-galactosidase (β-gal). The optimal amount of β-gal, PhE concentration, pH, and temperature for PhE-gal synthesis were 0.45 U/ml, 1%, 8.0, 40℃, respectively. Under these conditions, about 81.9 mM PhE was converted into about 47.4 mM PhE-gal, in which the conversion yield was about 57.9%. Meanwhile, when the reaction mixture containing PhE and PhE-gal was mixed and fractionated with water-immiscible solvent (EA or MC), it was observed that PhE-gal was distributed in water phase, and PhE was distributed in solvent phase. Additionally, PhE-gal was clearly distributed into water phase when MC was used, but PE-gal was not when EA was used. In the future, we are planning to carried out the continuing study on developing an alternative cosmetic preservative using PhE-gal.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.3-8
• /
• 1986

The investigation of the effect of solvent structure on the first-order solvolysis of cis-$[Co(en)_2ClNO_2]^+$ion has been extended to water + co-solvent mixtures where the co-solvents are glycerol, ethylene glycol, isopropyl alcohol and t-butyl alcohol. Rates of solvolysis have been evaluated by spectrophotometric method at temperature 25∼30$^{\circ}$C. The polarity of solvent has influence on the variation of rate constant. The non-linear plot of the rate constant in log scale versus $\frac{D-1}{2D+1}$ implies that change in solvent structure with composition plays an important role in determining the variation of rate constant. The linearity of the plot of the rate constant in log scale versus the Grundwald-Winstein Y factor confirms that the solvolysis is an Id-type process with considerable extension of the metal chloride bond in the transition state. In the Kivinen equation the slope of the plot of log k versus $log(H_2O)$ suggests that the solvolysis is also an Id-type process. The application of free energy cycle shows that the effect of solvent structure is greater in the transition state than in the initial state.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.155-162
• /
• 1984

Kinetic studies for the nucleophilic substitution reactions of para-substituted benzyl bromides and benzyl iodide with anilines were carried out in MeOH-MeCN mixtures at 35.0$^{\circ}$C. Hammett $ {\rho}_N,\;{\rho}_C$, Bronsted $ {\beta}$ and solvatochromic correlation coefficient a, s values were determined in order to clarify the transition state variations caused by changing nucleophiles, substituents, leaving group and solvents. The results of solvatochromic equation showed that ${\pi}^{ast}$effect was a dominant factor for the reaction systems studied. It was shown that the reaction proceeds via the dissociative $S_N$2 mechanism using the potential energy surface model approach. The potential energy surface model approach however failed to account for the transition state variation due to leaving group changes. The quatum mechanical approach showed that kinetic results were consistent with proposed dissociative $S_N$2 mechanism.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.588-594
• /
• 1992

Polyisocyanurate has been obtained from toluene diisocyanate(TDI) in the presence of potassium octoate catalyst and the effects of water and butanol in solvent were studied for the determination of the change of viscosity, the reaction time (length of time required for 5 poise of viscosity of product), molecular dispersity of product, and TDI conversion. When butyl acetate contains 0.1% of water by weight, uretidione was formed and a higher conversion was obtained at the condition. The uretidione was not formed by adding butanol to the solvent. At a higher concentration of butanol, a higher TDI conversion and a wider molecular dispersity were obtained.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.623-628
• /
• 1985

Rate constants for complexing with thiocyanate after ring opening of molybdenum-oxalate in acid media were obtained spectrophotometrically at 460nm. The acid-assisted dissociation of molybdenum-oxalate and the reaction of thiocyanate with oxalatooxomolybdenum (V) complex in acid media were investigated with thiocyanate and hydrogen ion concentration. The kinetic data indicate that molybdenum-oxalate is protonated to a limited extent in acid media and the protonated complex is responsible for an increase in rate for the reaction of thiocyanate with oxalatooxomolybdenum (V) complex. Replacement of an oxalate ligand in acid media has been interpreted in terms of dissociative mechanism involving bond-breaking of the oxygen trans to the yl oxygen.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.372-376
• /
• 2015

6-MQCC (Cr(VI)-6-methylquinoline) complex was synthesized by the reaction of 6-methylquinoline with chromium(VI) trioxide in 6 M HCl. The structure was characterized using IR (Infrared Spectroscopy) and ICP (Inductively Coupled Plasma) analysis. The oxidation of benzyl alcohol using 6-MQCC in various solvents showed that the reactivity increased with the increase of the dielectric constant, in descending order of DMF > acetone > chloroform > cyclohexene. In the presence of DMF solvent with acidic catalyst such as sulfuric acid ($H_2SO_4$), 6-MQCC oxidized benzyl alcohol (H) and its derivatives ($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$) were effectively oxidized. Electron-donating substituents accelerated the reaction rate, whereas electron acceptor groups retarded the reaction rate. The Hammett reaction constant (${\rho}$) was -0.69 (308 K). The observed experimental data was used to rationalize the fact that the hydride ion transfer occurred at the rate-determining step.