• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.183-194
• /
• 1992

Some silicon micromechanical structures useful in sensors and actuators have been fabricated by electropolishing or porous silicon formation technique by anodic reaction in HF solution. The microstructures were lightly doped single crystal silicon and the formation was isotropic independent of crystal directions. Porous silicon layer(PSL) was formed selectively in $n^{+}$ region of $n^{+}/n$ silicon structure by anodic reaction in concentrated HF(20-48%) solution. Characteristics of the formed PSL were investigated along with change of the reaction voltage, HF concentration and the reaction time. PSL was formed only in $n^{+}$ region. The porosity of the PSL was decreased with the increase of HF concentration and independent of reaction voltage. For the case of $n/n^{+}/n$ structures, the etched surface of silicon was fairly smooth and a cusp was not found. The thickness of the microstructures was the same as that of the epitaxial n-Si layer and good uniformity. We have fabricated acceleration sensors by anodic reaction in HF solution(5 wt%) and planar technology. The process was compatible with conventional It fabrication technique. Various micromechanical structures, such as rotors of motor, gears and linear actuator, were also fabricated by the technique and examined by SEM photographs.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.244-249
• /
• 1988

Some experiments were conducted to utilize the raphanus test as a bioassay method for plant growth regulaters and hormonal herbicides. Among seven radish cultivars, the response of Jangbaegminong was the most sensitive and quantitative to ${\alpha}$-NAA and its coefficient of variation value was the lowest. The optimum application time of test compounds was estimated seven to nine days after seeding. After ${\alpha}$-NAA treatment the curvature angle of radish cotyledonary petiols was sharply increased to the maximum value at 24 hours after and was changed by light and temperature conditions. The curvature response was observed by application of ${\alpha}$-NAA, phenoxy and indole compounds but often plant growth regulators, $GA_3$ benzyladenine, ABA and homobrassinolide was not detected by this method. So this bioassay was useful to evaluate the activity of a compound as an auxin or a hormonal herbicide.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.869-877
• /
• 1995

Carbonation process of Jung sun slake lime$(Sr(OH)_2=0.053 wt%)$ suspension with $CO_2$ gas at 30∼80$^{\circ}C$ has been studied to investigate the formation process of aragonite. The reaction temperature at above $50^{\circ}C$, rhombic nuclei of $SrCO_3$ has been grown with the interaction of $CO_3^{2-}$(aq) which is profitable to growth the nuclei at the liquid film of gas-liquid interface to form pillar aragonite crystal. At $40^{\circ}C$, the controlling of concentration of $CO_2$(aq) at the beginning of the reaction has been made the nuclei to growth to be an aragonite crystal. Addition of some $Sr(OH)_2$ to Yi Lee slake lime $(Sr(OH)_2=0.011 wt%)$ suspension and controlling the concentration of $OH^-$(aq) and $CO_2$(aq), the carbonation reaction produced pillar aragonite crystal with the short side of 0.1∼0.2 ${\mu}m$ and long side of 1∼2 ${\mu}m.$

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.97-115
• /
• 2011

A review about the application of response surface methodology in the optimization of food technology is presented. The theoretical principles of response surface methodology and steps for its application are described. The response surface methodologies : three-level full factorial, central composite, Box-Behnken, and Doehlert designs are compared in terms of characteristics and efficiency. Furthermore, recent references of their uses in food technology are presented. A comparison between the response surface designs (three-level full factorial, central composite, Box-Behnken and Doehlert design) has demonstrated that the Box-Behnken and Doehlert designs are slightly more efficient than the central composite design but much more efficient than the three-level full factorial designs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.689-694
• /
• 2006

The system performance of a bioactive foam reactor (BFR), that consists of a foam column using a surfactant and a biodegradation basin containing suspended bacteria, was investigated for the treatment of gaseous toluene or a mixture of four volatile organic compounds (VOCs, benzene, toluene, p-xylene, and styrene). Overall, the BFR achieved stable VOC removal efficiencies, indicating that it can be used as a potential alternative over conventional packed-bed biofilters. Furthermore, a dynamic loading test showed that relatively constant removal was maintained at the elevated loading due to a high mass transfer rate in the foam column. However, as the inlet concentration of VOCs increased, a portion of the VOCs mass-transferred to the liquid phase was stripped out from the biodegradation basin, resulting in a decrease in the overall removal efficiency. In the BFR, the removal efficiency of the individual VOC was mainly determined depending on the biodegradation rate (styrene > toluene > benzene > p-xylene), rather than the mass transfer rate. Consequently, increases in the microbial activity and the volume of the basin could improve the overall performance of the BFR system. Further investigation on microbial activity and community dynamics is required for the BFR when subjected to high loadings of VOC mixtures.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.37-50
• /
• 2024

The magnetotelluric (MT) survey can be affected by external environmental factors. In particular, when acquiring MT data in islands, it is essential to consider the combined effect of topography and sea to understand the results and make accurate interpretations. To analyze the MT response (apparent resistivity, phase) with consideration of the effect of topography and sea, a small cone-shaped island model surrounded by deep sea was created. Two-dimensional (2-D) and three-dimensional (3-D) forward modeling were performed on the terrain model considering topography and the island model considering both topography and sea. The 2-D MT response did not reflect the topographic and sea effect of the direction orthogonal to the 2-D profile. The 3-D MT response included topographic and sea effects in all directions. The XY and YX components of the apparent resistivity were separated on undulating topography, such as a hill. A conductor at 1 km below sea level could be distinguished from topographic and sea effects in the MT response, and low resistivity anomaly was attenuated at greater depths. This study will facilitate understanding of field data measured on small islands.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.246-250
• /
• 2009

The Ni formation behavior from the reduction of NiO nano crystals in the $H_2/N_2$ gas mixtures. The NiO nano crystals were synthesized by heat-treating nickel nitrate$(Ni(NO_3)_2\cdot6H_O)$ in the air at $500^{\circ}C$, and had an octahedral shape and the particle size of 200~500 nm. The NiO nano-crystals had well-developed (111) planes which is hardly formed in normal synthetic conditions. The reduction process was carried out at 300 and $600^{\circ}C$ for 15 and 60 minutes, respectively. When the NiO nano-crystals were reduced at $300^{\circ}C$, the Ni particles sustained the same octahedral shape as NiO, while Ni particles were to agglomerate at $600^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.243-244
• /
• 2011

최근에 산화물 반도체를 평판 디스플레이와 태양 전지의 투명 전극으로 응용하기 위해 많은 연구가 진행중에 있다. 특히, $In_2O_3$ 박막은 투명 전도 산화막으로써 3.7 eV의 직접 전이 밴드갭 에너지를 갖고 가시광 영역에서 높은 투과도를 갖는 반도체이어서 다양한 영역에서 응용 가능하다. 본 연구는 낮은 비저항과 높은 투과율을 갖는 최적의 투명 전도막을 성장시키기 위하여 라디오파 반응성 마그네트론 스퍼터링 방법을 사용하여 질소 도핑된 $In_2O_3$ 박막을 유리 기판 상부에 증착하였고, 후열처리로 온도 400, 450, 500, 550$^{\circ}C$에서 급속 열처리를 수행하여, 증착된 박막의 구조, 표면, 광학, 전기적 특성을 조사하였다. 증착된 박막은 XRD를 사용하여 구조적 특성을 조사한 결과, $2{\theta}=30.2^{\circ}$와 43.95$^{\circ}$에서 상대적으로 강한 피크가 관측되었다(Fig. 1). 전자는 (222)면에서 회절된 피크이며, 후자는 (100)면에서 발생한 회절 피크이다. 열처리 온도가 0$^{\circ}C$에서 500$^{\circ}C$로 증가함에 따라 (222) 면의 회절 신호의 세기는 상대적으로 증가하였고, 550$^{\circ}C$에서 급격하게 감소하였다. 박막의 광학적 특성은 자외선-가시광선 분광기를 사용하여 광학 흡수율과 투과율을 측정하였다(Fig. 2). 열처리를 하지 않은 박막의 경우에, 파장 200~1,100 nm 범위에서 측정된 평균투과율은 76%이었다. 광학 흡수 계수와 광자 에너지의 관계를 나타내는 포물선 관계식을 기초로 하여 광학 밴드갭 에너지를 계산하였다. 박막의 전기적 특성의 경우에, Hall 효과를 측정하여 전하 운반자 농도, 홀 이동도, 전기 비저항을 조사한 결과, 전기적 특성은 열처리 온도에 상당한 의존성을 나타냄을 알 수 있었고, 열처리 온도 500$^{\circ}C$에서 박막의 비저항값은 $4.0{\times}10^{-3}{\Omega}cm$이었다.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.91-99
• /
• 2001

The antennal sensilla of the adult male and female ladybird beetle, Harmonia axyridis (Coleoptera: Coccinellidae) were examined by scanning electron microscopy. Nine types of sensilla were characterized and grouped into 5 morphological classes: $B\ddot{o}hm$, basiconic, chetiform, coeloconlc, and trichoid sensilla. $B\ddot{o}hm$ sensilla were localized on the scape and pedicel, part of the ventral and dorsal proximal side. This placement suggests a role in proportion of antennal position and movement. Basiconic and chetiform sensilla were divided into 3 subtypes by morphology and length differences. Trichoid sensilla are confined to the last 2 flagellum segments on both sexes. Sexual dimorphism of antennal sensilla is limited to the three types of difference. The principal characteristics of this dimorphism are the following: a) The distribution of sensilla was differ from male and female in antennae. b) Males exhibit coeloconic sensilla not present in females; c) Females posses more trichoid sensilla than males. The possible role of specific dilference of the sensilla in intersexual communication is discussed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.161-166
• /
• 2020

In accordance with the amendment of the Industrial Safety and Health Act of 2007, Korea completely prohibited the import, distribution and manufacture of asbestos like Europe and Japan. Accordingly, the current problem of asbestos is the safe maintenance and disposal of asbestos construction material, the disposal of asbestos, and the final disposal of asbestos building materials. If the asbestos building material is made harmless, it may be classified as general waste or as recyclable waste. Therefore, this study evaluated the physical and chemical characterization of detoxified asbestos powder and the applicability of secondary products. In this study, it was found that applying the appropriate temperature and pressure for catalysis during asbestos desalination through low temperature chemical treatment was the most important factor.