• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.565-572
• /
• 2013

Hydration and physical characteristics of chemically-bonded phosphate ceramic (CBPC) binder based on dead-burned Mg-O with six different blends are investigated for efficient repair construction material by retarding set phase with $H_3BO_3$. The test specimen of the blender with silica fume shows higher compressive strength after 75 days. The CBPC with silica fume results in higher modulus of rupture that others. The test specimens of CBPC eludes lower calcium ion than that of OPC (Ordinay Portland Cement). The X-ray diffraction pattern shows that hydration results in the formation of magnesium hydroxide, M-S-H gel and $MgCO_3$ for the specimen with silica fumes. Combination with calcium for MgO is not desirable due to no formation of chemical bond between two components. Based on the experimental program, the mixture of MgO and silica fume shows efficient performance in strength and durability.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1065-1072
• /
• 2014

The shape of an impeller splitter for a dual-inlet centrifugal blower was optimized to enhance the blower performance. Two design variable, the normalized chord and pitch of a splitter, were used to evaluate the blower performance and internal flow fields based on the three-dimensional flow analysis. The blower performance obtained using this numerical simulation had a maximum error of 4 percent compared to that in an experiment at the design flow condition. The shape optimization of the splitter successfully increased the blower efficiency and pressure by 3.65 and 1.14 percent compared to the reference values. The blower performance was increased by reducing the flow separation near the blade suction surface by optimizing the shape of the splitter, which produced a pressure increase at the outlet of the volute casing.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.27-35
• /
• 2024

It was known that crude oil can be mainly divided into saturates, aromatics, resins, and asphaltenes. If microbial biodegradation of asphaltenes is effectively viable, additional oil production will be expected from depleted oil reservoir. Meanwhile, biodegradation can be applied to other aspects, such as the bioremediation of spilled oil. In this case, the biodegradation of asphaltenes also plays an important role. It has been already reported that asphaltenes are decomposed by bacterial consortia. However, the biodegradation mechanism of asphaltenes has not been clearly presented. The major reason is that the molecular structure of asphaltenes is complicated and is mainly in a aggregated form. In this paper, it was presumed that the biodegradation process of asphaltenes may follow the microbial oxidation mechanism of saturates and aromatics which are easier biodegradable than asphaltenes among the crude oil components. In other words, the biodegradation process was explained by serial stages; the contact between asphaltenes and bacteria in the presence of biosurfactants, and the decomposition of alkyl groups and fused-rings within the asphaltene structure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.6
• /
• pp.437-449
• /
• 1991

Time series of barometrically adjusted sea level at Pusan, Izuhara and Hakada are analyzed to study the fluctuations of the Tsushima Current through the Korea Strait. Variability of sea levels and their differences is divided into two parts with respect to the frequency of 0.01 or 0.02 cycles per day(cpd) At lower frequency, both of sea levels and sea level difference(SLD) are coherent and in phase to each other. Pusan has smaller seasonal variations in sea level than other two stations because the effects of geostrophic current and prevailing wind have a negative influence on the seasonal thermosteric contribution to sea level change. Low frequency variability of SLD thus of the Tsushima Current is much greater in the western channel. For higher frequency parts, SLD in the eastern channel has larger variability and is not coherent with that of the western channel. Sea levels at Pusan and Izuhara are $180^{\circ}$ out of phase with SLD in the western and eastern channel respectively, whereas the Hakada level is in phase. This result indicates that eastern channel has a normal response to the along-channel winds and cross-channel geostrophy because Izuhara faces the eastern channel.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.223-238
• /
• 1974

CNDO/2 MO theoretical studies and kinetic studies of halide exchange reactions for alkylchloroformates have been carried out in order to investigate structure-reactivity relationship of alkylchloroformates. From the result of energetics, it was concluded that the most stable configuration of alkylchloroformate is that in which alkyl group and chlorine are trans to each other, and that the hindered rotation about the bond between the carbonyl carbon and alkoxy-oxygen bond is attributed to the ${\pi}-$electron delocalization. It has been found that the large charge separation is due to -M effect of carbonyl and alkoxy oxygens and-I effect of chlorine. The order of rates in solvents studied was $(CH_3)_2 > CO > CH_3CN{\gg}MeOH.$$I^->Br^->Cl^-$ in protic solvent, and of Cl^->Br^- >I^-$ in dipolar aprotic solvents. Alkyl group contribution has the decreasing order of $CH_3-> C_2H-{\gg}i-C_3H_7-.$ The solvent effect has been interpreted on the basis of initial and final state contribution. A transition state model has been suggested, and it has been proposed that the most favorable mechanism is the addition-elimination. From the results of activation parameters and electronic properties, an energy profile has been proposed. Structural factors determining reactivities of alkylchloroformates have been shown to be charge, energy level of ${\alpha}^*LUMO$ to C-Cl bond and ${\alpha}^{\ast} $antibonding strength with respect to C-Cl bond in this MO. Charge and polarizability of nucleophile, and the interaction of these effects with solvent structures are also found to be important.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2006

A parallel plate detector containing PTFE films in FEP film for relative dosimetry was designed to measure the response of detectors to S and 10 MV X-rays from a medical linear accelerator through different thicknesses of lead. The dielectric materials were 100 m thick. The set-up conditions for measurements with this detector were as follows: SSD=100 cm the test detector was at a depth of 5 cm and the reference chamber was at a depth of 10 cm from the phantom surface for 6 and 10 MV X-rays. Lead blocks were designed to cover the irradiated field. They were added to the tray to increase thickness sequentially. We found that the detector response decreased exponentially with the thickness of lead added. The linear attenuation coefficients of the test detector and reference chamber were 0.1414 and 0.541, respectively, for 6 MV X-rays and 0.1358 and 0.5279 for 10 MV X-rays. The test detector response was greater than that of the reference chamber. The response function was calculated from the measured values of the test detector and reference chamber using optimization. These optimized constants for the detector response function were independent of theenergy. As a result of optimizing the response function between detectors, the use of a relative dosimeter was validated, because the response of the test detector was 1% for 6 MV X-rays and 4% for 10 MV X-rays.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.493-504
• /
• 1997

Background : Non-small cell lung cancer is one of the most frequent cause of death due to cancer in men, and its incidence among women is rapidly increasing. Although there has been a recent surge of interest in combined modality therapy for stageIII non-small cell lung cancer(NSCLC), the optimal treatment is still not well established. Thoracic irradiation has long been the gold standard for locally advanced unresectable NSCLC. However, although conventional radiotherapy(XRT) can palliate symptom and improve local control of disease, it has at most only a modest effect on survival. Recently, cisplatin(cis-diamminedichloroplatinum) has been reported to enhance the cell-killing effect of radiation For patients with unresectable NSCLC, cisplatin-based concurrent chemoradiotherapy(CCRT) had the advantage of therapeutic response over XRT alone and therapeutic side effect more commonly occurred in CCRT group in EORTC(European Organization for Research and Treatment of Cancer) and other trials. Objectives : We compared therapeutic response, compliance, and side effects between CCRT and XRT in patients with advanced NSCLC. Patients and Method : Thirty patients with biopsy-proven inoperable NSCLC were randomized to one of two treatment arms. Arm A consisted of XRT, radiotherapy for 4~6 weeks(1.8 Gy given 20~33 times, in five fractions a week), and arm B consisted of CCRT, radiotherapy for 2 weeks(3 Gy given to times, in five fractions a week), followed by 3 week rest period and then radiotherapy 2 more weeks(2.5 Gy given 10 times, in five fractions a week), combined with 6mg cisplatin per square meter, given daily before radiotherapy. We evaluate therapeutic response, compliance, change of performance status, side effects, and radiation pneumonitis by using the author's made scoring system. Results : There was no significant difference in therapeutic response and compliance. But there was a significantly lower laboratory complication and radiation pneumonitis in CCRT group (p < 0.05). There's significant negative correlation between stage and therapeutic response score in both groups(R=0.353, p < 0.05) In both groups, patients with squamous cell carcinoma had a tendency to higher therapeutic response score than those with adenocarcinoma. Conclusion : There was no difference between CCRT and XRT in respect to therapeutic response and compliance. But CCRT had a advantage of decreased side effects.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.105.1-105.1
• /
• 2010

바이오디젤 보급 활성화에 따른 식물성 원료유의 가격 상승 및 수급 불안정성 문제를 해결하고자 폐유지를 원료로 바이오디젤을 생산하고자 하는 시도가 이루어지고 있다. 폐유지의 사용은 폐자원 활용 측면에서 의미가 있으며 바이오디젤 생산 단가를 낮출 수 있다. 다양한 폐유지가 산업체로부터 배출되며 이 중에서 dark oil은 식용유 공장에서 식물성 원료유의 정제 과정에서 생기는 부산물로 바이오디젤로 전환 가능한 성분을 포함하고 있다. 본 연구에 사용된 dark oil은 54.9%의 유리지방산과 28.0%의 triglyceride, 4.4%의 diglyceride, 그리고 1% 이하의 monoglyceride를 함유하고 있다. Dark oil의 초기 산가는 109.8 mg KOH/g이었다. 본 연구에서는 dark oil의 유지 부분(triglyceride, diglyceride, monoglyceride)을 유리지방산으로 전환시켜 HAAO(high acid acid oil)을 생산한 후, 고체 산 촉매에 의한 에스테르화 반응을 통하여 바이오디젤을 생산하고자 하였다. 유지 부분의 유리지방산 전환 반응을 위하여 음이온성 계면활성제인 SDBS(sodium dodecyl benzene sulfonate)가 사용되었다. Dark oil:황산:물의 질량비가 10:2:10이고 SDBS가 오일 대비 3%인 조건에서 dark oil의 산가는 190.8 mg KOH/g까지 증가하였고, dark oil:황산:물의 질량비가 10:4:10이고 SDBS가 2%인 조건에서는 산가가 194.2 mg KOH/g까지 증가하였다. 생산된 HAAO을 이용하여 오일 대비 30%의 Amberlyst-15 촉매 하에서 HAAO:메탄올 몰비 1:9인 조건에서 에스테르화 반응을 수행하였을 경우 FAME(fatty acid methyl ester) 함량은 81.3%까지 증가하였다. 고체 산 촉매로써 Amberlyst-15와 가격 면에서 저렴한 PC101을 비교하였을 경우 FAME 함량은 각각 80.7%, 77.9%로 비슷한 효율을 나타내었다. 생산된 바이오디젤의 FAME 함량을 높이기 위해 증류 공정을 필요로 하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.347-352
• /
• 2006

분자전해질연료전지 내의 다공성 기체확산층은 반응가스의 확산과 전자이동통로의 역할을 수행할 뿐만 아니라 전기화학반응에 의해 공기극에서 생성된 수분(기상 혹은 액상)을 반응면으로부터 분리판 채널 방향으로 이동시켜 배출시키는 중요한 역할을 한다. 따라서 물관리를 통한 성능향상을 위해서는 기체 확산층의 구조 및 재료특성에 대한 심도 릴은 연구가 필요하다. 실제 단위전지 체결시 기체확산층은 분리판의 리브(rib)에 의해 눌리게 되며, 그 부분의 기공 크기 분포의 변화를 야기한다. 또한 리브 전단부분에서 탄소 섬유가 손상을 입으며, 탄소 섬유를 감싸고 있는 PTFE coating이 벗겨지게 되어 표면화학적 특성이 달라진다. 본 연구에서는 단위전지 체결 시 분리판에 의해 눌리는 기체확산층의 기공 크기 분포 변화를 측정하였으며, 기공의 소수성에서 친수성으로의 변화를 알아보았다. Mercury 기공 측정기와 PMI 기공 측정기는 큰 기공 분포의 변화에, 질소의 흡/탈착을 이용한 BET 방식은 작은 크기의 기공 분포 변화 관찰에 사용되었다. 체결압에 의한 탄소섬유의 구조적 변화와 아울러 표면의 습윤 정도의 변화를 XPS와 물/알콜 Uptake를 이용해 알아보았다. 이 연구를 바탕으로 물관리를 통한 연료전지 성능 향상을 위한 최적 GDL 선정에 기반이 되는 자료를 도출하였다.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.215-221
• /
• 2014

A simple heterogeneous system has been developed by using base treated manganese dioxide (B-$MnO_2$) for the aerobic oxidation of amines under mild reaction conditions of 1 atm of air and $50^{\circ}C$ in hexane. This system was highly efficient to oxidize various kinds of primary or secondary amines including aliphatic, aromatic, and hetero-atomic ones under the applied reaction conditions. Amines were oxidized to nitriles or diimines by the self-condensation or oxidative dehydrogenation through imine intermediate. The B-$MnO_2$ was reused for at least 5 times without any loss of its catalytic performance and showed its cost effectiveness, easy workup, and easy separation of the products for achieving the protocol of green chemistry.