• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.37-42
• /
• 2006

The effect of arc like streamer discharge is investigated on the hydrogen generation using the multineedle-plate electrode geometry plasma realtor(MPER) and the needle-plate electrode geometry plasma reactor(NPER). In order to restrict waves at the water surface when the high voltage applied, two kinds of the insulator such as the rectangular mesh or the hole mesh type are installed under the water surface. The discharge assistant of the two type(the saw type and the $TiO_2$ pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without the discharge assistant on the water surface.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.8-14
• /
• 2003

The daylight responsive dimming system, which uses daylight and automatically controls the light output of electric lighting according to the amount of 3.vailable daylight, is an energy saving system Successful performance relies on how photosensor signal can precisely represent workplace illuminance. However, it is not accurately identified due to the dynamic nature of the sun and the sky changed with respect to different seasons or time. The purpose of this research is to identify the correlation between workplace illuminance and photosensor signals, and propose an optimal location and spatial characteristics of the photosensor through experiments, which minimizes the above impacts and improve system performance.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.365-373
• /
• 1997

다이아몬드 형성에 미치는 MPECVD 증착조건에 관하여 연구하였다. 증착 실험 기판은 Si p-type (100)wafer를 사용하였으며 다이아몬드 박막은 다음과 같은 조건하에서 증착되었다. 메탄 농도:0.75%(3scm)-3%(12scm),산소 농도:0%-0.5%(2scm), 반응 압력:20torr-80torr, 반응 온도:$600^{\circ}C$-90$0^{\circ}C$. 낮은 증착온도($600^{\circ}C$)에서는 (100)의 우선성장면을 보였고 온도가 증가함에 따라 (100)과 (111)이 혼재된 cubo-octahedron이 형성되었고 90$0^{\circ}C$에서는 (111)의 우선성장면을 가징 octahedron이 형성되었다. 산소가 첨가됨에 따라 높은 메탄농도에서도 양질의 다이아몬드가 형성되었다. 낮은 압력하(200torr)에서는 비정질탄소가, 높은 압력하(80torr)에서는 양질의 다이아몬드가 형성되었다.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.2
• /
• pp.277-284
• /
• 1993

$^{99m}Tc$-MAG3는 세뇨관 배설을 하는 신장 기능 영상용 방사성의 약품으로서, 가운데 $^{99m}Tc$이 있고 1개의 유황과 3개의 질소가 아래쪽 면에 정사각형으로 배치되고 정점에 산소가 위치한 4각 피라미드형을 하고 있다. 그러나 시판되는 신장 영상용 MAG3는 반응성이 강한 -SH기에 의한 부산물 생성을 방지하기 위해 benzoyl기로 보호되어 있으므로 보통 조건으로는 잘 표지되지 않고 10분 정도 끓여주어야 한다. 본 실험에서는 실온에서도 benzoyl기를 잘 끊어지게 하는 이미다졸, 아고마틴, 괴리딘등과 같은 염기성 촉매제를 가하고 여러가지 PH에서 실온에서 반응시켜 본 결과, benzoyl기가 끊어지면서 $^{99m}Tc$과 -SH기가 반응하는 첫번째 반응이 일어난 후에도 산성에서 약알칼리성 범위에서는 중간체가 상당량 생성되고 알칼리성 (pH 10.5)이 되어야 최종 산물로 재빨리 넘어가는 것을 발견하였다. 또한 glucarate, medronate, phthalate, acetate 등 여러가지 다른 transchelating agent를 사용하여 같은 반응을 시킨 후에도 생성된 중간체의 HPLC 피크가 같은 retention time (Rt)을 보이는 것으로 보아 이 중간체의 화학구조내에는 transchelating agent를 포함하지 않는 것으로 보인다. 최종 생성물과 중간체의 ImM 시트테인 용액 중에서의 안정도 시험을 하여 본 결과 최종 생성물은 매우 안정하나 중간체는 불안정한 것을 발견하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.193-196
• /
• 2006

This paper presents the results of catalytic endo- to exo- isomerization of saturated poly cyclic compound. Several zeolites were tested and influences of, Si/Al ratio and Structures of the zeolites on the reaction were investigated. The results showed that Y zeolites were more active than other zeolites, because of its large pore size and relative strong acidity. In all Y zeolites with different Si/Al, Y-5.4 is best. In all the zeolites tested, Y calcined at $450^{\circ}C$ was favorable. Still now the aluminium chloride catalyst is more active than zeolites. However, considering of environmental problems, corrosion, and treatment can make the zeolite catalyst substitute the aluminium chloride catalyst.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.337-343
• /
• 2001

Activated carbon particles of 1.274 mm diameter and sand particles of 0.455 mm diameter were employed as the support of the biofilm formed in fluidized bed biofilm reactors(FBBRs) for the wastewater denitrification. Ethanol was used as the electron donor in the anoxic respiration. The steady-state biofilm thickness increased as the nitrate loading rate increased, and the activated carbon particles induced thicker biofilm than the sand particles. The FBBRs with sand support showed higher efficiency and rate of the nitrate removal than those with activated carbon support, and exhibited the biomass concentration of 37 kg/㎥ and the nitrate removal rate of 21 kg N/㎥d.

• The Korean Journal of Zoology
• /
• v.35 no.1
• /
• pp.45-57
• /
• 1992

생쥐를 48시간 동안 결식시킨 후 유문결찰하여 급성미란을 유발시키고 미란형성부의 점막 내위선을 구성하는 각 세포의 구조변화와 IgA 분비세포의 분포를 관찰하였다. 미란부 점액분포의 변화는 표면상피의 손상 정도가 심해질수록 경계부의 PAS양성반응은 감소되었으며 중심부에서는 표면상피의 소실로 인하여 PAS 양성반응이 관찰되지 않았다. Glycocalyx 관찰을 위한 ruthenium red 반응에서도 경계부의 상피세포 손상이 심해짐에 따라 정단세포막 상층에 나타나는 양성반응은 감소되었고 측면과 기저면의 양성반응은 관찰되지 않은 것으로 보아 세포 손상시 tight junction은 파괴되지 않음을 알 수 있었다. 미란경계부의 미세구조변화로서, 상피세포는 손상이 진행될수록 세포질이 용해되어 공포가 형성되고 핵응축 및 정 단세포질의 점액원과립의 소실이 관찰되었으나 tight junction은 유지되었다. 반면에 점액경세포는 점액원과립의 수가 증가되고 조면소포체가 종창되어 있었다. 미란의 경계부와 중심부에서 벽세포는 다수의 소포가 출현한 후 세포내세관이 종창되었으며 그 후에 mitochondria가 파괴되었고 주세포는 주변의 벽세포가 커지면서 가장자리로 밀려나 크기가 정상보다 작아지고 조면소포체와 mitochondria가 종창을 나타내었다. IgA분비세포는 점막이 파괴된 미란부 점막하조직의 혈관 주변에 다수 존재하는 형질세포에서 확인되었다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.816-822
• /
• 1996

Dependence of graphitic structure on oxidation of carbon materials was discussed using furan resin-derived carbon with inorganic compounds such as SiC and TiO2 Oxidation of carbon was governed by active site. I. e surface area regardless of the degree of graphitization. When oxidation was considered for not unit weight but unit area graphitization was important factor for oxidation so that the degree of graphitization increased the oxidation rate was delayed. Graphite (tiO2 addition) and turbostratic graphite(SiC addition) were oxidized through the same mechanism. In carbon materials with different structure components more than 2 oxidation of each component was different and amorphous component without the influence of additives on the surface was selectively oxidized in the intial oxidation stage.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1373-1385
• /
• 2017

The purpose of this study was to optimize the formulation for fish-meat noodles added with farmed olive flounder (Paralichthys olivaceus) using response surface methodology. Fish-meat (surimi) from P. olivaceus was prepared by a traditional washing process. Independent variables were Alaska pollack, fish-meat from P. olivaceus, and starch, whereas dependent variables were whiteness and texture. The results for whiteness and texture produced very significant values for whiteness (P<0.001), strength (P<0.001), hardness (P<0.05), breaking force (P<0.001), chewiness (P<0.001), brittleness (P<0.001), extensibility force (P<0.001), and extensibility distance (P<0.05). The optimal formula for fish-meat noodle was addition of 72.00 g Alaska pollack, 11.59 g P. olivaceus, and 15.86 g starch. Experimental values of whiteness, strength, hardness, breaking force, chewiness, brittleness, extensibility force, and extensibility distance under optimal conditions were $59.01{\pm}0.53$, $708.22{\pm}54.12g/cm^2$, $1,390.07{\pm}67.70g/cm^2$, $3,622.77{\pm}92.52g$, $2,686.94{\pm}103.22g$, $278,578.31{\pm}10,150.22g$, $52.22{\pm}2.97g$, $24.14{\pm}3.55mm$, respectively.